You just turned this workstation PC into an ARGB sleeper PC! Also I do have a similar 2-fan 3070 from Zotac, shorter than your 3-fan 3070Ti. They're the AMP Holo models afaik.
Thanks for watching!! The model I have is indeed the amp holo version. Very loud to be honest! I hope your dual fan is quieter and not as hot as my card!!!
Hi! Nice video. Hope to see part two. I recently got the same Z640 but with two processors, but got very unlucky because mine is throwing me a very weird POST error when booting up. More weird that is that I hit enter, the PC reboots, the takes a long time, and then enters windows. Did you have any similar issue?
Thanks for watching! Fortunately I haven’t had long boot times or errors. You may be having longer boot times due to having two CPUs compared to my single one. How long are the boot times? I would also make sure both cpus (and secondary cpu board) are seated properly!
@@radiatorpapi Yea they are. I see and can test both CPUs and work perfectly fine. The issue seems to be related to the PCIe port where the Graphics Card is. I tested the Graphics Card in another PC and work perfectly....
Quadro 4000 is Fermi. That's old. Not sure what use you could have for it other than an emergency backup in case that 3070 dies. Speaking of dying, I would NOT put 2 4TB hard drives in RAID-0 - which they should have called DAID-0 because it's a Dangerous Array of Inexpensive Disks... I've lost 8TB of data before, single external drive crashed to the floor... did not enjoy, would NOT recommend. The only situation I would use RAID-0 with is maybe SSDs, which are less likely to die, maybe for speed-sensitive workloads like video editing... and MUCH smaller drives, maybe some QLC drives modded down to SLC, sacrificing capacity for write endurance/performance... put stuff I'm working on currently and that won't have to stick around for but so long. I just wouldn't trust a 4TB RAID-0 for anything. That's begging to lose 8TB of data.
Thanks for watching! I think I will just keep the Q 4000 as a extra display out for test benches. Can't bring my self to throw it out or sell it as its worth only 10 bucks anyway. I apperciate the concen for having my drives in raid 0. I am not planning on putting any thing sensitive on here and am just using them as scratch disk. I move everything important on to my NAS. I have a little faith in these drives as they are NAS drives (Seagate Iron Wolfs) but def have my eyes on it!
You just turned this workstation PC into an ARGB sleeper PC!
Also I do have a similar 2-fan 3070 from Zotac, shorter than your 3-fan 3070Ti. They're the AMP Holo models afaik.
Thanks for watching!! The model I have is indeed the amp holo version. Very loud to be honest! I hope your dual fan is quieter and not as hot as my card!!!
first thing i hear
"sup guys im home and my package came"
wait wait wait hold on a 2 gig gpu what the hell?
@@SaraMorgan-ym6ue ya bro back in the day they had 2 and 1 gig vram gpus lol
Too cool
swag
it's a beast 14 cores enough to take over the planet muhahahahahahahaha
What ports does it have to connect the monitor?
@@Lewis-fr9mu Motherboard has VGA port. GPU has display port and HDMI
@@radiatorpapi ah okay thanks, how loud is it?
@@Lewis-fr9mu At medium to low fan settings in bios, it’s not bad! Temps are ok too!
Hi! Nice video. Hope to see part two.
I recently got the same Z640 but with two processors, but got very unlucky because mine is throwing me a very weird POST error when booting up.
More weird that is that I hit enter, the PC reboots, the takes a long time, and then enters windows.
Did you have any similar issue?
Thanks for watching! Fortunately I haven’t had long boot times or errors. You may be having longer boot times due to having two CPUs compared to my single one. How long are the boot times? I would also make sure both cpus (and secondary cpu board) are seated properly!
@@radiatorpapi Yea they are. I see and can test both CPUs and work perfectly fine. The issue seems to be related to the PCIe port where the Graphics Card is. I tested the Graphics Card in another PC and work perfectly....
Odd. Which GPU are you using?
@@radiatorpapi Nvidia Quadro M6000 24GB
Looks like you should be able to run it with just 250w so it doesn’t sound like power. Have you tried the lower full x16 slot?
😒👍 its all about the Xeons
Forever and always!
first
Quadro 4000 is Fermi. That's old. Not sure what use you could have for it other than an emergency backup in case that 3070 dies.
Speaking of dying, I would NOT put 2 4TB hard drives in RAID-0 - which they should have called DAID-0 because it's a Dangerous Array of Inexpensive Disks... I've lost 8TB of data before, single external drive crashed to the floor... did not enjoy, would NOT recommend.
The only situation I would use RAID-0 with is maybe SSDs, which are less likely to die, maybe for speed-sensitive workloads like video editing... and MUCH smaller drives, maybe some QLC drives modded down to SLC, sacrificing capacity for write endurance/performance... put stuff I'm working on currently and that won't have to stick around for but so long. I just wouldn't trust a 4TB RAID-0 for anything. That's begging to lose 8TB of data.
Thanks for watching!
I think I will just keep the Q 4000 as a extra display out for test benches. Can't bring my self to throw it out or sell it as its worth only 10 bucks anyway.
I apperciate the concen for having my drives in raid 0. I am not planning on putting any thing sensitive on here and am just using them as scratch disk. I move everything important on to my NAS. I have a little faith in these drives as they are NAS drives (Seagate Iron Wolfs) but def have my eyes on it!
@@radiatorpapi use the fermi to annoy amdumbs who dont have dgpus
Make controller angry lolol
very shaky video
@@pu8reLib ruclips.net/video/aKuivabiOns/видео.htmlsi=4iOfEtAxEzReip12