How to Reverse Motor Direction Rotation on a Combustion Blower Exhaust Fan
HTML-код
- Опубликовано: 31 июл 2024
- This video will show you how to reverse the direction of a combustion blower exhaust fan motor from clockwise to counter clockwise or vice versa.
Dude, thanks! I did this on a kitchen exhaust replacement fan motor that I had laying around and installed it. Blows in the right direction now.
Most excellent, fantastic to hear!
Thank you very much for sharing this info. For us mortals, it's not always obvious how to do things and thanks to people like you who share their knowledge we get to save a buck or two by doing it ourselves. Really, THANK YOU.
Absolutely our pleasure! So glad it was helpful. Any future questions or needs just let us know. Warmest Regards,
Been searching for a video for this exact info. Thanks worked perfect for me.
So glad it was helpful Terrell, thanks so much!
can't u just flip the cables?
Quality video bro❤.
Thanks Bro!
Very helpful, thanks 👍
I’m looking to find out why the auger on my Enviro Omega pellet stove. It works for 30-40 min then the stove goes out. The auger is all jammed up. Thanks in advance
Thanks for contacting us. I would say it's important to make sure the auger shaft itself is not jammed or bound up in anyway. Recommended to clean out the fuel hopper and completely remove the auger shaft. Inspect the flights on the shaft to see if there is anything abnormal. Check the auger end plate and bushing if applicable on your Omega. You can check the auger motor as well. Overtime the motor can lose lubrication, gears can become weak, etc.. You can run your auger motor to direct power to check operation and torque. Check out the video here for making a test cord - ruclips.net/video/rlmiCYI2WPk/видео.htmlsi=PP8ktXgcXi1A_Xbv
In the event you need any replacement auger feed system parts for your Omega please let us know, we are happy to provide references. Appreciated.
Thanks for getting back to me. I cleaned out the auger four times already It runs for about 30-45 min . The motor keeps on running (stopping and starts up again until the stove shuts off should I replace the brass bearings or motor? Thanks again Joe
Glad you cleaned out and inspected the auger shaft. I would suggest pulling out the auger motor and testing it to direct power if you haven't already (link in previous message). You can do tests on operation and torque. This will let you know for sure if the auger motor is good or bad. If your Omega does have an auger end plate with a bushing, inspect the bushing. If the bushing looks worn it can cause noise and/or jamming/binding during operation. If you know for sure your auger is jamming like you mentioned in the original message, the issue is within the feed system. If you are not physically seeing or hearing it bind/jam up then this could be one of the safety switches shutting down the auger motor such as the vacuum switch or high limit switch. Start with simple things first. Happy to help. Thanks.
cool😎
Appreciate the video but the most important thing is to SEE what you're doing. Should have the camera close to what your hands are doing. Not the full 6 foot of space around you.
Thanks. Yeah working on better views and angles for our videos. Glad you still found some benefit with it. Appreciated.
Reverse the armature
Of course this video would have been 15 seconds long ..just say reverse the armature. Use a lil motor oil if possible.
Thanks for your message. Some require further guidance and our goal is to provide videos that folks can go step by step through and comment with questions. Thanks.
@THEMAN-fl1ei, So maybe you can make a better video. Go for it. Meanwhile, thanks Earthsense! Saved my ass big time.
How to change the direction of rotation of the gasoline engine..?
Start the car, put the car in reverse and press the gas pedal. However, if that doesn't work, then surely just wait until opposite day comes back around of course and you should be good to go.
👍