That's fast and impressive for a video, but he puts a lot of strain on the equipment and there's too much dirt and grass in the pile. He probably works a bit slower off camera, and it's better that way.
I work in a company that uses Palfinger cranes. When I adjust the crane, it also squeaks, even though it is well lubricated. The squeak is therefore hydraulic
What a qute little trailer :D In sweden we run 3m wood with 2 stacks on the truck and 3 on the trailer. A skilled driver loads that in 15-20 minutes if the forvader have done a good job. But this guys has to pack almost every claw, thats not fun :)
Alucar is Dracula in reverse, but without the 'd'. Man, I wish it was that smooth in SnowRunner, where it takes a few minutes just to get 1 long log onto the right spot on the log carrier.
That's absolutely nothing to be proud of. He's very hard on the loader and is creating a lot of pressure peaks which is hard on the entire hydraulic system.
@@augustreil He is talking about when he is hitting the logs against the ground or the side of the load. It creates stress in places that is not built for it. These cranes is built to take forces lifting and moving not hitting. But its ok as long as you are careful with servicing the crane.
@@eriksward6894 Timber company where i work we do that move alot and it's only nessesary when you have un-equal lenght timber, but i agree it takes it toll on the crane if you're not careful/skilled and used to the crane you are using. My old crane for example was 2010 kesla and i loved it easy controls and simple to maintain, but the new 2016 Z-boom crane maintenace is twice as long than the old and controls were a bit unusual for my taste.
And he put the logs directly on the ground, without putting a couple of big logs as a base for the rest to be stacked upon. The next step in processing the logs are either milling it or making fire wood. No matter what it is, the dirt from the groung will dull the blades or chains.
Not fast but sloppy. Actually very sloppy and soon he destroys hes Epsilon. Real pro dont bang trees on ditch chore like theres not enough crass and dirt allready. Real skilled operator working silent and smooth and regualry makes one drip more than others :)
![[4K] Watch SpaceX Catch A Starship Rocket From Space!!! #IFT5](http://i.ytimg.com/vi/pIKI7y3DTXk/mqdefault.jpg)
Perfect Job! He like's his job🌳👌
Fast, accurate skills. Serious machinery. Impressive 👍
That's fast and impressive for a video, but he puts a lot of strain on the equipment and there's too much dirt and grass in the pile. He probably works a bit slower off camera, and it's better that way.
This guy needs a raise!!! Sick.
He loves it!
Nice job!
Wow, skilled operator.. great work!
some skills there!
Fast skills respect.
FairPlay 👏🏼 do it long enough it becomes second nature
sounds of the crane... My god... GREASE!!
I work in a company that uses Palfinger cranes. When I adjust the crane, it also squeaks, even though it is well lubricated. The squeak is therefore hydraulic
100% in past he was forvarder operator, those moves are similar :D
Agreed
In this work Don t have a lot people know use like him. So be indulgence
Rough man with a crane.
👍👍👍
What a qute little trailer :D In sweden we run 3m wood with 2 stacks on the truck and 3 on the trailer. A skilled driver loads that in 15-20 minutes if the forvader have done a good job. But this guys has to pack almost every claw, thats not fun :)
Alucar is Dracula in reverse, but without the 'd'. Man, I wish it was that smooth in SnowRunner, where it takes a few minutes just to get 1 long log onto the right spot on the log carrier.
Jag är imponerad.
Is that trailer made by ”närko”?
Istrail
Epsilon palfinger?
Загнивающий капитализм.
Baaamm 💪
Gerilitos Audrius? 😊
Wow he is fast
Fast isn’t always good.
What`s the hurry?
He always working like that.
Probably paid per load
That's absolutely nothing to be proud of. He's very hard on the loader and is creating a lot of pressure peaks which is hard on the entire hydraulic system.
Приезжай на стажировку,меня бы за такую погрузку выгнали бы.20 лет на вывозке леса.
ja zakupal ,i vozil les v rossije ,konečno videl kak vi rabotajete, odin gruz dlja menja nedelju vivozjat,produktivnostj 0,01 procent.
@@ivarsvitkovskis8199 Palfinger Epsilon Cranes
not good for the crane in long usage
Why ????
@@augustreil He is talking about when he is hitting the logs against the ground or the side of the load. It creates stress in places that is not built for it. These cranes is built to take forces lifting and moving not hitting.
But its ok as long as you are careful with servicing the crane.
@@eriksward6894 Timber company where i work we do that move alot and it's only nessesary when you have un-equal lenght timber, but i agree it takes it toll on the crane if you're not careful/skilled and used to the crane you are using. My old crane for example was 2010 kesla and i loved it easy controls and simple to maintain, but the new 2016 Z-boom crane maintenace is twice as long than the old and controls were a bit unusual for my taste.
Do they pay extra for dirt? damn...
And he put the logs directly on the ground, without putting a couple of big logs as a base for the rest to be stacked upon. The next step in processing the logs are either milling it or making fire wood. No matter what it is, the dirt from the groung will dull the blades or chains.
He must be getting paid by the ton. How many pounds of dirt does he take each load?
Definitely won’t want to buy that after 5 years
He maybe fast but, mill's hate all the dirt that are in this load and pounded into the logs. That loader will be junk in no time way to hard on it.
Tish is slowed
Snabb o mjukt bara lite för snabb är nog för filmen.
Normal hastighet skulle jag säga!
India vich vi
Надолго установки не хватит
Way too much dirt and rocks each grip
Yep, not that good either. I have seen operators move with better skill without all the banging many company would fire him.
Sir can you provide contact number of this machinery supplier please..
Smh this is hard to watch
slow and steady wins the race..... not this....
Not fast but sloppy. Actually very sloppy and soon he destroys hes Epsilon.
Real pro dont bang trees on ditch chore like theres not enough crass and dirt allready. Real skilled operator working silent and smooth and regualry makes one drip more than others :)
Не долго ей осталось установке по работать, с таким оператором долго она не проживёт, научись работать потом садись на машину
Чуть резковато,а в остальном профи. Да и фишка у него далеко не наши Сф чтобы дохнуть от работы
Медленно ничего не заработать
Умник, я , на epsilone 15 лет грузил, причём на територии завода с утра и до вечера. Еpsilon вышак манипулятор.
Привет Литве из Латвии