1984 VW Vanagon Westfalia Camper Restoration & Subaru Engine Swap
HTML-код
- Опубликовано: 27 дек 2015
- Bringing a stock 1984 VW Vanagon Westfalia camper back to life with a Subaru engine and lots of upgrades, bodywork and paint. All done in a single unheated garage from fall 2014 to spring 2015.
Авто/Мото
Good to see a fellow Alberta keeping these old vans alive! Kudos from Canmore, AB! We love our ‘81 Westy
I am so incredibly impressed that you took this on and saw it through! CONGRATS!
Mark, My name is Dale Griffiths and I had a 1970 VW Bus. Loved it very much. Been thinking about one like you have. I watched you video and that is a very nice camper that will last you a long time. Thank you for taking the time to post this.
Thanks Dale for the nice comments.
Fantastic. She lives another few decades. Good restoration.
Beautiful job! the photos of how you did the rear panel sides replacement were very helpful, many thanks for showing!
absolutely beautiful video,I've already watched it 4 times.one of the best that I have seen....great job mark..
We're taking a Greyhound bus tomorrow morning to Almonte to pick up our '88 Westie from Frank. He's got the old beast really dialled in mechanically. It's exciting to have it back on the road after many years in storage. Need a shakedown cruise to get reacquainted. Next year - body work!
Man, I wish I had your skill set. Great job!
Congrats on a beautiful build. You worked really hard on this and it looks great.
Absolute joy to watch! Thank you so much and a superb job my friend!
I loved your video. Saved of course. I restored an '81 AdventureWagen several years ago. Today I bought an '83 Westfalia water cooled to restore. This has given me a lot of thought fodder. I also have a 2001 Outback with the H6 that I may be installing into the Van. Thanks again, great vid!
Excellent restoration and you obviously are very skilled and know exactly what your doing.
I enjoy these videos to see a ruff vehicle transformed into virtually a new vehicle, in fact better than when it was new.
Thanks for taking the time to make this video, considering all the work you did and allowing others to see the whole process and the finished product.
I love this comment: "...you obviously are very skilled and know exactly what your doing." Nope. I started out with no idea how to get a Subaru engine out of a Subaru or into a Vanagon. I knew it could be done and I spent a lot of time researching and planning. The Samba website was an essential resource as well as Rocky Mountain Westy, Small Car, and GoWesty for providing advice and good explanations of their products. I bought my first MiG welder for this project. I had welded before but my welds were never good. Now I can weld anything at this scale. I put hundreds of hours in and loved it! I can say at the end of this odyssey I do have the skills but I didn't when I started. If you want to do this and you are good at research and planning and have enough patience, it can be done and it's worthwhile.
Great work, love that you use it also for its intended purpose.
Awesome job mate!!! Good see that kind of pride in your work!
This is awesome! Very inspiring. I'm about to do all the same, but so far have gotten lucky and already have a doner subaru that I got for $100. Northern Minnesota is tough on these things so I definitely have my work cut out for me.
Man Thanks for Sharing! That was a labor of love.
This is a lovely restoration job. I'm glad to see you painted it the original color. Thanks for sharing your video. Great work!
Thanks Zala I had fun doing it!
Absolutely beautiful work! Thanks so much for sharing!
Sweet Job Mate! I love seeing crazy people, like me bringing these back to life, and filming it Wow!
Beautiful...Still considering doing my Vw 2.1 Caravelle conversion 1988 model due to availability of engine part's...Thanks for sharing...
Ein tolles Video! Danke. Excellent work!
Beautiful work on that Westy!
Congrats Mark, You have maked a great job. Thanks for sharing this video.
Fantastic job on the restoration and on the photography to document it. Extremely cool!
Thanks!
looks good. it's nice to see someone that takes care of their T3/Vanagon
awesome video. Thanks so much for sharing. What a great van.
you went ALL out its a dream rig!! love it solid as hell huh cool color
I have the exact same van/ year /colour just picked it up in Aug. I hope it turns out as well. Thanks for the motivational video
Incredible job! Congratulations
Nice video. Ive found yours to be one of the better Subie swap. Vehicles Because of camera angles and the overall clean installation i really liked how you prepped and cleaned up the " problem" areas etc. one of the reasons i like this conversion is because of how well the engine fits and looks like it is made for the vehicle or original of course the power increase is important as well
totally amazing i hope you get many years of use from your project.
Fantastic! I want to do a similar conversion but with a TDI. Great work. I'm from BC
Did a good job there Mark, she looks a Beauty.
Great job!!! Congrats!!!
Awesome, and greatly documented.
Well done!
Great Van! Super work mans!
so sick!!
Nice work!
Great inspiration. My 85 will need a new engine soon. While I'm at it ...
Amazing process
Well done. I live in Alberta too.
Amazing job, maybe one day, I will have that beauty 🤩
Hi!
Even if it was mostly a slideshow, it was a really beatifull one. Allmost made me cry beatifull.
This is as good i'm going to try with my upcoming project. :)
Thak you for the videos! :)
Greetings from Finland
Superb! I shall be going down this path soon
Awesome job !
What a beautiful job
Great job. Thank you for sharing.
Well done ,lots of love to the dub . 🚎
Thanks, it was fun.
Mark Griffiths I’ve been restoring mine for the past two years just got it back on the road and it feels good to be driving her again after not having her for two years but she shouldn’t need much for the next 10 or 15 years other than upkeep and general stuff . Good to see them end up in hands that treats them the way they should be treated .i’m lucky mine had zero rust
Beautiful!
damm this is a work off art good job
Nice build!!
Great project, Well done...
Beautiful job I want one of these vans so bad
Epic work
My vanagon's engine just died, so I am looking forward to the whole restoration of my baby.
A van is never a baby come on.
great job
wow the end result looks unreal!! I've got the same 84 vanagon so i may have to copy cat you hahah
Copy away! I copied and was inspired by many builds. You don't get this far without some help.
Looks great!
wow lots of work
very nice job!
she is a thing of beauty
fantastic job, in Germany there are only three vanagons in good condition for sale !
Hard to believe. Here they come up all the time but often they want too much for stock vans that need all these upgrades.
I have an air-cooled T25 with 213000 km's on the clock. It's in iceland, but it just passed a 2 year inspection with new starter, new belt, new brakes in front. Shipping to germany is like €1000 from here. Still want one?
Vanagon with Subie engine is MUST !!
+ from Latvia. Thank you
magnificent i have one the same blue....
I love this!
Very cool!!
Great job!!
Awesome! I have an '87 Syncro tin top, in admittedly much better shape, but considering an engine swap and color change. Your video was inspiring for sure!!!! Incredible amount of work. Awfully well done.
good job.
A reliable camper van🙏🤟 winning comb9
beautiful
very good job!
Gute Arbeit!
Amazing!
Stinkin’ awesome!
An amazing job Mark. Thank you for putting the whole process up on RUclips for others to enjoy and potentially follow your lead...
Any chance you have /kept a list of suppliers you can share?
Sure. For starters GoWesty, Van Cafe, Bus Depot, California Import Parts, Concept 1 in Calgary, Subaru Calgary, Rocky Mountain Westy, SmallCar, Summit Racing, Auto Value, Princess Auto, Green Line Hose & Fittings, Country Campers, Hobo Campers, Go West Campers, Calgary Auto Body Supply, National Transmission, Fifth Avenue Volkswagen Calgary, U Wrench, Speedy Glass, Malahat Auto Recyclers, Pick n Pull,
Love that Blue!
How did I only see this video for the first time after talking Westy with you so many times! You are a true genius. I am just starting my restoration now. Can you recommend your panel welder?
*Awesome!*
Beautiful
Greetings from Jakarta
Best way I can say it is WOW. 😎
Such an awesome job!! Did you change the drums over disc? Thanks for sharing man!
Great Video , love the coloured epoxy primer never seen coloured epoxy primer before , you have any details on that please , thanks for sharing
Loving the van, the build, the video and the music - tell me the track from about 3:30 please!
Too bad you had to deal with that rust. I'm sure its near impossible to find a dry bus up there, eh? Awesome, articulate job. Wish I had the money to do this. Cheers from Salt Lake City
Thanks!
Amazing can you do my Kombi T1 engine swap hahaha damn...this all looks so technical I have no clue.
So beautiful.. you have done amazing work.. how long it took you to finish this project?
Nice work. Looks great. I have one question. One pic showed a rather small looking drum brake. Have the brakes been upgraded and, if not, how do they cope with the bigger powered Subaru engine?
So far the brakes are stock and like everything else on a stock Vanagon, they are undersized. I have a front brake upgrade in progress to Audi 5000 Turbo bigger rotors/calipers. However the Subaru engine doesn't requires bigger brakes because the idea is to have enough power going up hills fully loaded, not for going really fast.
and how the gearbox and the motor were spliced there is a difference in the bell (in its height and diameter), how are things going with the clutch release, how are the discs themselves being bigger than the disc from the Volkswagen?
Nice 👍👏
I like da music. Are there TABs out there?
Nice ❤️
Very nice job, I love the engine conversion. I did not know that was possible. I just found a pretty clean Westfalia in a storage yard tucked away. I am going to make an attempt to buy it what was your investment after purchase. I have a 1983 Lotus Esprit I just finished bringing back to life and I am thinking of selling my Coleman popup and switching things around some.
The purchase price was $3200 but the final cost was almost 10 x that in repair and upgrades. Yep, it's a lot to spend but it is as reliable as an a new van and way cooler!
Amazing job what color blue is a call? I want to do the same thing you did with a €2003 Eurovan camper
The colour is stock 1984 Vanagon Medium Blue code LH5G
Niiiiice! :D
Hello Mark.
I just noticed your Alberta Plates. I too have a Vanaru. I am in Edmonton. I did a '85 over with a EJ22 but the same old body remains. I am now having overheating problems. As of today I of the opinion that my rad is a bit blogged up. How is your project?
Hey there. I'm in Calgary and I've been driving the van every day since completing it. Your overheating may be the rad or rad fan, or possibly you need to check that the system is completely bled of air. It's tough to do. Your main coolant tank should always be full to the top, and should pull from the overflow.
Good resto! Just curious, but I'm watching this in Jan 2021, do you still have it and how had it held up?
I still have it and it still looks and runs as good
Hi Mark, great job! What make and model is the oil pan donor car?
The engine donor is a 2002 Subaru Forrester
Que chida la dejaron
I've only seen this done on vans. Is it not possible to convert Beetles?