I understand you're trying to make a "quick video" but this is WAY to fast to actually help.. Then you just skip over the part that everyone is here to see. Which is how to actually get all the multicolors into your settings for the final product. Do you need to go through and program each setting separately? Or is there a way that you're doing it different than that? I mean this could have been a 10 minute video, that actually had some explanation. Instead of a 2 minute, blast past everything video... 🤔🤦
It's not the testing array that I would like to see how it's done. The testing array is simple, and I've done that a thousand times. It's the incorporating the settings into the complex image, that had a ton of different colors in it..... That's the part that would be nice to see. But don't worry about it, your affiliated partners do a way better job making videos about your products, than you do....
@@JRBigSYou can set up different layers and put through the parameters of the colors you want according to the test array onto the image you want. And if you want to ask how to divide the image into different pieces, yes, that part was done by Ai software, after all this tutorial is supposed to show audience that you can actually laser engrave different colors on the same piece of stainless steel, not how to use Ai software. And thank you for your feedback, we will try our best to improve. ❤
All I get with these test grids using the IR Fiber is almost white squares but then goes to dark/burnt into the metal. I get nothing like what is presented here
@@xToollaser you only answered half of their question. With your answer, they will believe that stainless steel is the ONLY kind of metal that will yield these results.
Anybody catch the BS laser engraving on the Stainless Steel Tag. Lasing the Color Grid...Look at Time Mark 57 secs as the laser is engraving the Color Grid. Funny how it looks exactly like it was super imposed over the tag. Look at the upper right corner of the grid, magically color engraving OFF OF THE TAG !!! Now I've only been using Laser Engravers since 2014, but I have NEVER SEEN ANYTHING LASE LIKE THAT... Can you imagine being able to LASE "AIR"...And has ANYONE ELSE EVER NOTICED THAT XTOOL "NEVER" LASES EXAMPLES IN "REAL TIME", ACTUAL SPEED. They did this with the F1. And showed it laser engraving materials it was NOT capable of actually engraving.
Funny enough. 1. The black area in the top right corner isn't a shadow but part of the metal plate. The reflection makes it look like engraving on the “air”. Just try using infrared light to engrave on stainless steel yourself. You'll see. Tons of users already done this. Or if you want, we can release the real time clip. 2. To fully appreciate xTool's real-time engraving capabilities, we invite you to watch our extensive library of livestreams. While shorter videos highlight key points, livestreams offer an immersive experience.
For the file: dataaccess.mblock.cc/t/1Ka
I understand you're trying to make a "quick video" but this is WAY to fast to actually help.. Then you just skip over the part that everyone is here to see. Which is how to actually get all the multicolors into your settings for the final product. Do you need to go through and program each setting separately? Or is there a way that you're doing it different than that?
I mean this could have been a 10 minute video, that actually had some explanation. Instead of a 2 minute, blast past everything video... 🤔🤦
hey ruclips.net/video/vYvjrBjRbyk/видео.htmlsi=sft2Sim4Hc2iicXz, can check out this video, the testing array setup is the same as this one.
It's not the testing array that I would like to see how it's done. The testing array is simple, and I've done that a thousand times. It's the incorporating the settings into the complex image, that had a ton of different colors in it..... That's the part that would be nice to see. But don't worry about it, your affiliated partners do a way better job making videos about your products, than you do....
@@JRBigSYou can set up different layers and put through the parameters of the colors you want according to the test array onto the image you want. And if you want to ask how to divide the image into different pieces, yes, that part was done by Ai software, after all this tutorial is supposed to show audience that you can actually laser engrave different colors on the same piece of stainless steel, not how to use Ai software. And thank you for your feedback, we will try our best to improve. ❤
I wish 😍🤩
Est ce réalisable avec un laser à diode ? 10/20/40 w ? ou faut il forcement un laser infra-rouge? Merci d'avance
All I get with these test grids using the IR Fiber is almost white squares but then goes to dark/burnt into the metal. I get nothing like what is presented here
As discussed in the video, material composition significantly impacts results. Our tests produced similar outcomes in some cases.
Wow excellent! It is a special kind of metal? or works with any kind? Thanks!!
Must be Stainless Steel
It doesn't have to be stainless steel... it can do this to a multitude of metals@Penguin817
Stainless Steel!
@@xToollaser you only answered half of their question. With your answer, they will believe that stainless steel is the ONLY kind of metal that will yield these results.
@@Connorsdaddy12062008 fiber is famous for laser engraving on metals
Whoa, why so fast!
Just to be clear, due to the editing preferences, we speed up the process. ❤
Anybody catch the BS laser engraving on the Stainless Steel Tag. Lasing the Color Grid...Look at Time Mark 57 secs as the laser is engraving the Color Grid. Funny how it looks exactly like it was super imposed over the tag. Look at the upper right corner of the grid, magically color engraving OFF OF THE TAG !!! Now I've only been using Laser Engravers since 2014, but I have NEVER SEEN ANYTHING LASE LIKE THAT... Can you imagine being able to LASE "AIR"...And has ANYONE ELSE EVER NOTICED THAT XTOOL "NEVER" LASES EXAMPLES IN "REAL TIME", ACTUAL SPEED. They did this with the F1. And showed it laser engraving materials it was NOT capable of actually engraving.
Funny enough. 1. The black area in the top right corner isn't a shadow but part of the metal plate. The reflection makes it look like engraving on the “air”. Just try using infrared light to engrave on stainless steel yourself. You'll see. Tons of users already done this. Or if you want, we can release the real time clip. 2. To fully appreciate xTool's real-time engraving capabilities, we invite you to watch our extensive library of livestreams. While shorter videos highlight key points, livestreams offer an immersive experience.
@@xToollaser I would love to see the real time clip! :D
@@Schmambo ruclips.net/video/HB9zwQNZlNI/видео.html, there you go! The last 7 secs show the "shadow" part!
Peter Brown did a real time video of it if you want tosee it done by someone else
Hope I can achieve this at home soon 🍀🤞🪄❤️🔥