I have recently started making earrings and this video taught me so much. I definitely need the earring cards too. Everything you made was amazingly beautiful and you made it look effortless. Thanks so much!!
Nicely done. So happy to see that you are so meticulous and concerned with fine finishing details. Best of luck on your creations...PS...I love the square ones!!
If you are looking for the hand drill I recommend I have it on my list here: www.amazon.com/shop/squidlicks?listId=24F3JVJD2HF9V&ref=cm_sw_em_r_inf_list_own_squidlicks_dp_0Y65WEpS0khsB
Oh these turned out so beautifully! Thanks for the how-to! I learned a lot! Just ordered those molds using your amazon shop link. I can’t wait to get them to give this craft a try!
OMG that was freaking amazing!! I have the same set and i am looking to others to see how to make them. Your earrings were HOTTTT!!! but your freaking jewelry cards were OUT OF THIS WORLD HOT! Great Job! you have given me so many ideas! Subscribing!!
Oh, that's fantastic, Yanna. Thank you so much for the video. It's very informative. I am thinking of getting into resin. They look amazing. That's cool that you incorporate your graphic design skills into it...I will be doing that as well :)
Can more glitter be added? Or does it make it harder to dry? I've never made earrings before but, I want to try. Thanks bunches. I love how yours turned out!!!
The resin I use takes 24 hours till you can take them out of the mold, but when making thinner pieces I will let them sit in the mold for longer because they will still be somewhat bendy after only 24 hours. I'm not sure how much resin I used, I never measure, but i should! 😅
Hi! I’ve just started my resin journey and I was just curious as to where you get the paper earring holders. I want to make jewelry look a bit more professional.
I have a Cricut and designed the file myself! You can find the file here if you have a cricut: www.etsy.com/listing/806867453/earring-card-cut-file-svg?ref=shop_home_active_1
Please help!!! I have been doing epoxy resin earrings for a few months and they come out beautiful and cured. But once they are exposed to sun they get soft/bendy. Once off of the sun they go back to normal. I have tried different brands and it keeps happening. I’m sure I’m measuring right and stirring it slow and for at least 5 min. Do you have any tips? Or any resin brand that you recommend? It also happens when I make rolling trays, keychains, ashtrays or something else that is usually ticker than an earring 🙃 Thank you so much!
If I am lazy packing tape or a lint roller. Otherwise just some dish soap and let air dry to avoid lint. If you get hard water marks use filtered water to rinse :)
UV will be a stronger hold but your earring will need to be see through for the light to cure the resin behind the post. If not, use regular resin or glue.
Thanks for the wonderful video!! What paints/colors did you add? Also, what is the brand of hand drill that you use? Thanx again. Waiting for more resing jewelry videos
Did you use Epoxy resin to make these? Not that that's wrong, but I've never seen anyone use epoxy for jewelry before. Usually, they use uv resin. I do. I don't have the patience for epoxy. 😂 Beautiful pieces, though. Inspiring. Thanks for the video.
It would depend on the thickness of post you are using. I eyeball mine against the post. You can always drill from smaller size to bigger and test it out since you can't go backwards.
When I drill a hole for the pin and then glue it with the E600 it doesn't stay, the pin wiggles loose. The drill bit is about the same size as the pin. Should I drill the hole longer or try a different glue?
It's different depending on the resin your using but for this resin I'm using it takes 24 hours. Here's a video where I explain what resin I use: ruclips.net/video/5Oyv32KdAlI/видео.html
Hi! You gave me a great idea! I actually just posted the file for sale for $3 here: www.etsy.com/listing/806867453/earring-card-cut-file-svg?ref=shop_home_active_1
UV resin that needs light will come in a black bottle so not sunlight can get in. If your bottle is clear and in 2 parts it's probably just regular resin.
what kind of resin do you use? Cuz I've tried two different ones and one of them was still sticky even after few days and second one was veeeery smelly. Please help!
I have a video explaining what resins I use! But yes be careful they can be harmful so use a mask if required! Here is the video: ruclips.net/video/5Oyv32KdAlI/видео.html
This is a bad question for me because I am not great at pre-measuring for my molds. A lot of people will measure the mold out by filling it with water and measuring the water that you pour out. Just make sure the mold is dry before using!
Depends if i want it to be opaque or translucent. Power usually makes the resin opaque and liquid makes it see-through. It depends on how much pigment is in the dye. You can find my list here: www.amazon.com/shop/squidlicks?listId=1MV05IIBQ0O9O&ref=cm_sw_em_r_inf_list_own_squidlicks_dp_bUX20642botVM
Thank you so much, it was really useful, can you please tell me what kind of glue you're using? I made some rings but I couldn't find suitable glue to glue resin on metal . Thanks
Hmmm... I really depends if you think you are going to be committed to it and buy a larger quantity of resin or if you just want to dip your feet in. I end up using a lot of the stuff in kits anyway so it's not a total waste to get one! It's a convenient starting point for sure but if you know you're going to get serious about it I would go for the larger amounts.
Hi Luisa! I just used the cardstock from Michaels. Here it is in red, but they come in all colors: www.michaels.com/red-cardstock-paper-value-pack-by-recollections-5.5-in-x-5.75-in/10615834.html
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
I've been trying to get into jewelry making and this is the first video that's actually helped
Yaaay I'm so glad I can help!
But seriously tho!!!
I feel the same way... love this video, so easy to follow.. do you have a video tutorial of how you did your earing cards?
I have recently started making earrings and this video taught me so much. I definitely need the earring cards too. Everything you made was amazingly beautiful and you made it look effortless. Thanks so much!!
Wow I am so glad I came across your video. I have a Cricut machine and it never occurred to me to make my own earrings cards. THANK YOU!!!!!!
You can make your own jewelry boxes too! ruclips.net/video/hpUyoW4MPPo/видео.html
very creative...am gonna rewatch this cos i dont need to be wasting money at the store any longer and i can do whatever i like
very beautiful earrings
Great video thank you so much for Sharing! Liz.
I would use them all!!! they look so pretty
Nicely done. So happy to see that you are so meticulous and concerned with fine finishing details. Best of luck on your creations...PS...I love the square ones!!
Thank you for noticing! I try :)
I’ve been really debating on making my own earrings but COVID is making me consider practicing to sell..these are gorgeous😍
Go for it! Even if you don't sell them it's super fun and rewarding.
it looks very professional and the cards are beautiful! I love you're Cricut!
this told me i need to get silver foil they look so awesome and the coordination with your jewlery and glasses is also aesthetically pleasing
Silver leaf is the best!
oh mg thanks for this Ive been frustrated on how to do the semi-hoop earrings. THANK YOU SO MUCH
Glad I could help! 😀
These have turned out beautiful. They are so eye catching xxx
thank you SO much!
Great tutorial! I have trouble drilling holes in the resin. I have this mold as well. I didn't see the starter hole. Thank you for that!
Glad it was helpful! 😀
Wow fentastic work
Thank you so much for showing the process! Now I know I need the hand drill 😍
There are some molds that come with a little bump so there is a hole for earring hooks and eye pins :) the drill isn’t really necessary
@@hheaarteyes thank you 💗
If you are looking for the hand drill I recommend I have it on my list here: www.amazon.com/shop/squidlicks?listId=24F3JVJD2HF9V&ref=cm_sw_em_r_inf_list_own_squidlicks_dp_0Y65WEpS0khsB
Thanks a lot for going thru all details!
No problem! Glad it was helpful for you!
Very cute, thanks for sharing
Great job 👌
Thanks 😁
Oh these turned out so beautifully! Thanks for the how-to! I learned a lot! Just ordered those molds using your amazon shop link. I can’t wait to get them to give this craft a try!
Wonderful! Have fun! Love these molds so much.
Very nice. Thank you for sharing. You are a very creative business woman.
That's so nice of you to say, thank you!
will you do a tutorial on making earring cards like the one you made on this video. Your work is so amazing, I really like it
Thank you so much! I have a video on my packaging if you are still interested I can send you the link.
@@Squidlicks wow, I apologize I am just seeing this, yes please send me the link. thank you in advance..
Thank you for sharing your talents with us. Your videos are great. Do you make bangle bracelets too? Would love to see a quick tutorial.
Thanks so much! That’s a great idea I will add that to my list!
OMG that was freaking amazing!! I have the same set and i am looking to others to see how to make them. Your earrings were HOTTTT!!! but your freaking jewelry cards were OUT OF THIS WORLD HOT! Great Job! you have given me so many ideas! Subscribing!!
Thank you so much you are too nice!! Glad to have you, hope I can continue to inspire 😊
Oh, that's fantastic, Yanna. Thank you so much for the video. It's very informative. I am thinking of getting into resin. They look amazing. That's cool that you incorporate your graphic design skills into it...I will be doing that as well :)
I'm so glad I was able to help! Being a designer is a definitely a boost for a jewelry business. 😀
Thank you!
I love those molds!! Cool video! Thanks for posting this! It was very helpful!
Glad it was helpful!
I fell in love with everything about them 🤤🤤🤤🤤
I’m so happy I found your channel! Exactly what I was looking for! Thank you so much
You're so welcome!
Thank you 😊
You're welcome 😊
Do you have a video or can you make one on how you used the cricut for your cardboard holder. Thanks! This was a super helpful video
youre so talented! thank you for sharing!
Thank you so much!
Love 💖 this delicate look !
Thank you!! 😊
Beautiful work.
What do you call (& where did you find) the back part of those earrings (the ones you glued to the back
Hi friend... brautiful.... like it
Thank you for sharing ❤️
Can you show how you mixed it thank you
I love your designs and on top you're funny as hell :D love this channel
Yay! Just did a little happy dance :)
Thank you so much for sharing this video with the world. I learned a lot
Glad it was helpful!
So beautiful! Where did you get the molds? I missed that part lol
Stephanie Fernandez “lets resin” on ama6
Here is a list, they are in the mold section! www.amazon.com/shop/squidlicks
@@Squidlicks not there were would like to purchase
Very cool, I'm so going to need a cricut soon. They can do so much 😁 all the earrings turned out beautiful 💙
Thanks so much! Yes they are very handy indeed!
@@Squidlicks 😁😁😁
Ahhh this is inspiring me!!!!!
YAY! So happy to get you motivated!
How much resin do you prepare for each mold?
Thanks!
Hi, can you tell me exactly what glitter & gray material that you used in these earrings? Thank you!
Can more glitter be added? Or does it make it harder to dry? I've never made earrings before but, I want to try. Thanks bunches. I love how yours turned out!!!
You can add as much glitter as you like! It will make the mixture thicker though.
How many hours does it take to dry?
The jump rings I have are to small to out the ewribga together! What size do you use?
What colors did you use?
I am madly in love with all of these earrings! What kind of wire did you use for those half circle ones?
Thank you so, so much for this video
Glad it was helpful! :)
Hi, so beautiful, by the way how long did resin dry? And what's the amount of Resin?
The resin I use takes 24 hours till you can take them out of the mold, but when making thinner pieces I will let them sit in the mold for longer because they will still be somewhat bendy after only 24 hours. I'm not sure how much resin I used, I never measure, but i should! 😅
This video was insanely helpful thank you so much!!! Where did you get the earring posts and backings?
emma k probably Amazon or Etsy
I usually get them on amazon. Here is a good option for posts: amzn.to/2MngUas
what type of paper/card stock is that you used to make the backing cards for your earrings? thanks so much this video was so helpful!
Just regular cardstock from the craft store, but I would recommend a little bit thicker cardstock if you can find it.
Hi! I’ve just started my resin journey and I was just curious as to where you get the paper earring holders. I want to make jewelry look a bit more professional.
I have a Cricut and designed the file myself! You can find the file here if you have a cricut: www.etsy.com/listing/806867453/earring-card-cut-file-svg?ref=shop_home_active_1
Are you using UV light to have an quick dry? Thankyouuuu more tutorials
The resin I used in this video was not UV resin, it was 2-part resin. I find that using uv resin in large amounts is hard to control, and expensive!
Please help!!! I have been doing epoxy resin earrings for a few months and they come out beautiful and cured. But once they are exposed to sun they get soft/bendy. Once off of the sun they go back to normal. I have tried different brands and it keeps happening. I’m sure I’m measuring right and stirring it slow and for at least 5 min. Do you have any tips? Or any resin brand that you recommend?
It also happens when I make rolling trays, keychains, ashtrays or something else that is usually ticker than an earring 🙃
Thank you so much!
I think most resins do get somewhat bendy in the sun. I would try to use UV resin and see if that happens?
@@Squidlicks thank you so much!!! 🙏
I feel silly asking but what is the thing you use to cut out your design? it’s so cool!
Beautiful earrings. How long did you wait before taking them out of the mold?
These are BEAUTIFUL ... question are these heavy or more hollow/light when wearing them?
Thank you so much! They are super light! Resin is usually very lightweight.
great video, love your channel
Glad you enjoy it!
Where did you get your tiny drill bits?!
Hi! This is the hand drill i use: amzn.to/3lSb9Dj
Where did you get your nail polish love it
I think I'm wearing 2 different ones in this video, haha!
Peel away from the mat (as in May face down)to reduce the chances of you ripping your cards. Great video!
Good tip! Thanks!
Where did you buy the machine??
How do you clean these molds when dirty? TY
If I am lazy packing tape or a lint roller. Otherwise just some dish soap and let air dry to avoid lint. If you get hard water marks use filtered water to rinse :)
Easy
I have seen several tutorials about making epoxy earring and I am confused whether to use UV epoxy or glue to attach the stud?
UV will be a stronger hold but your earring will need to be see through for the light to cure the resin behind the post. If not, use regular resin or glue.
Where'd you get those cups with the beak on them? It'll help me so much when pouring
You can find them on my list here:
www.amazon.com/shop/squidlicks?listId=24F3JVJD2HF9V&ref=cm_sw_em_r_inf_list_own_squidlicks_dp_3D2vhrPGfYUCb
what epoxy resin brand is the best in making jewely for comercial purpose
Love it! but now I need a Cricut :p
Cricut's are the best. I'm going to enable you and say that you do need one 😂
With gilter you put something else what is that
how long do you wait for it to dry?
It depends on what kind of resin you use! This one I was using is 24 hours, but others can dry in 8 hours.
Squidlicks thankyou
Thanks for the wonderful video!! What paints/colors did you add? Also, what is the brand of hand drill that you use? Thanx again. Waiting for more resing jewelry videos
Hi! All the items I use and recommend can be found here: www.amazon.com/shop/squidlicks
@@Squidlicks when will you restock
Did you use Epoxy resin to make these? Not that that's wrong, but I've never seen anyone use epoxy for jewelry before. Usually, they use uv resin. I do. I don't have the patience for epoxy. 😂 Beautiful pieces, though. Inspiring. Thanks for the video.
Yes I did! I have problems with UV resin warping on me (if you wish the fish earrings video) so I prefer the mix and cure kind.
Where i can order all that stuff
Hi! You can find it here: www.amazon.com/shop/squidlicks
What resin do you use or what resin do you recommend most for jewelry making
I recommend this resin: entropyresins.com/product/ccr-clear-casting-epoxy/
How pierced the earing ??
i mean what the name of this tool ??
Are you referring to the hand drill?
What brand is this mold?
You can find it here: amzn.to/3w3DM5f
So I tried the E6000 glue the way you did with the hoop earrings and it didnt hold very well. Any recommendations?
You can always use a little bit of resin! That will hold better.
Hi what’s the size of the jump rings
To be honest I am not entirely sure. I just grab the variety package of sizes and try them all until one fits haha!
Hey, where do you got those „stabs“ for the hoops from? I couldn’t find them on Amazon 🙄 thx ☺️
Hi! I just jewelry pins like these, cut them with wire cutters, and file them down so they are not sharp: amzn.to/39UANlR
Hello. I love your work. What do you use to tint the resin? Also, how do I get them to come out shiny on the bottom side, they are dull
Hi, I use alcohol ink in this video. Check if your molds are shiny, the resin will have the same finish your mold has.
I mix rasin and hardner but did not dry it why is that
What size drill bit did you use for the hoops? I did this but the earring was too thin and the post fell out):
It would depend on the thickness of post you are using. I eyeball mine against the post. You can always drill from smaller size to bigger and test it out since you can't go backwards.
When I drill a hole for the pin and then glue it with the E600 it doesn't stay, the pin wiggles loose. The drill bit is about the same size as the pin. Should I drill the hole longer or try a different glue?
I would try a different glue, maybe something similar to like a super glue? Or you could use a bit of resin next time you mix up a batch!
What file did you use on the cricut machine to make the earring cards?
I actually made the file you can get it here: www.etsy.com/listing/806867453/earring-card-cut-file-svg?ref=shop_home_active_1
How long did you let your resin set for? A few hours? Thank you for this video!
It's different depending on the resin your using but for this resin I'm using it takes 24 hours. Here's a video where I explain what resin I use: ruclips.net/video/5Oyv32KdAlI/видео.html
What's the svg or cut file for the earring holder you created?
Hi! You gave me a great idea! I actually just posted the file for sale for $3 here: www.etsy.com/listing/806867453/earring-card-cut-file-svg?ref=shop_home_active_1
What resin do you recommend
I actually have a video where I explain what resin I use and why! ruclips.net/video/5Oyv32KdAlI/видео.html
I’m using puduo resin do I need to use a uv light or is that only with uv resin
UV resin that needs light will come in a black bottle so not sunlight can get in. If your bottle is clear and in 2 parts it's probably just regular resin.
Can u tell me where u get ur drill please
I was able to snag mine on amazon! Here's the link: amzn.to/2KWamiu
what kind of resin do you use? Cuz I've tried two different ones and one of them was still sticky even after few days and second one was veeeery smelly. Please help!
Check the description I think it's in their
Thats bc you didnt mix correctly & almost all resins have a smell. Wear PPE at all times
I have a video explaining what resins I use! But yes be careful they can be harmful so use a mask if required! Here is the video: ruclips.net/video/5Oyv32KdAlI/видео.html
Is this epoxy or UV?
This is regular epoxy. :)
How much resin did you prepare? I have these plus an additional from let’s resin but I cant find how much I should mix up
This is a bad question for me because I am not great at pre-measuring for my molds. A lot of people will measure the mold out by filling it with water and measuring the water that you pour out. Just make sure the mold is dry before using!
What machine and program u used?
It's a Cricut Maker, it comes with it's own program to run!
Hi there, nice crafting skills. Could you please be so king to recommend your resin? Thank You.
Yes I can, I actually have a video for that! ruclips.net/video/5Oyv32KdAlI/видео.html
Do you use liquid or powdered pigment?
www.amazon.com/dp/B07RWJ4QSQ/?ref=exp_squidlicks_dp_vv_d
Depends if i want it to be opaque or translucent. Power usually makes the resin opaque and liquid makes it see-through. It depends on how much pigment is in the dye. You can find my list here: www.amazon.com/shop/squidlicks?listId=1MV05IIBQ0O9O&ref=cm_sw_em_r_inf_list_own_squidlicks_dp_bUX20642botVM
Thank you so much, it was really useful, can you please tell me what kind of glue you're using? I made some rings but I couldn't find suitable glue to glue resin on metal
. Thanks
she used E6000
I wanna start making my own but I don't know if I should start with a kit or buy everything by itself? What would you recommend?
Hmmm... I really depends if you think you are going to be committed to it and buy a larger quantity of resin or if you just want to dip your feet in. I end up using a lot of the stuff in kits anyway so it's not a total waste to get one! It's a convenient starting point for sure but if you know you're going to get serious about it I would go for the larger amounts.
Squidlicks Thank you.
Hi,Squidlicks! Can you tell me what kind of cardstock did you use for package on cricut? What kind of resin did you use? Thank you.
Hi Luisa! I just used the cardstock from Michaels. Here it is in red, but they come in all colors: www.michaels.com/red-cardstock-paper-value-pack-by-recollections-5.5-in-x-5.75-in/10615834.html