Good morning, I just received mine a couple of days ago. Can’t wait to see it work! Having a problem figuring out how to hook up with 6803 chip lights. Also not sure about pin out for DMX to RJ45
0 seconds ago Thank you for the video and all the helpful comments, is it possible to ,plug tubes to the decoder and create diferente patterns ? Instead of using Madrix? Since I’m a beginner,I love to create using more the fader
so i’m looking to remotely control led light strands like these. but it is for a marching band. there will be a strand of led lights on each drum set. and i want to turn them on and off from the sideline during their performance. do you have any gear that can do that?
I bought two of these, but I can't figure out how to accomplish the rainbow effect at 10:17 of the video with the controller. The DMX mapping shows value 48-63 on Ch 5 as Rainbow Colour Changing... but all that seems to be to me is a crossfade between two colors? I can probably do with the light board but if there is a build in effect it would be easier.
@@JUNPRO Ok... where I’m installing there is going to have an ETC Ion controller running them. I can create the effect in the Ion, I just wanted to make sure it wasn’t pre-built into the encoder
Hi! I have a question. I see you are using king kong 256B can I use king kong 1024 instead? Just learning about this so I don't know if that will work or not? Thank you
hello i need your help. i have a DMX512 DECODER 32 channel with 8outs of RGBW+V where am connecting the strips. on this Decoder can i connect a led strip that is WS2812B DC5V LED Strip RGB 1M 144 Pixels Smart Addressable Black PCB WS2812 IC Full Color ? will it work? thank you
First of all thanks for making and sharing this video. I have one question! On the floor on the left there is a grey box component which has a cable. The cable seems to connect to each of the JUN PRO DMX SPI decoders. What is it and it’s purpose in your setup?
would you tell me, how many Amps your power supply has ? looks like 50 meters in total, with 5v leds ? i need 30m for my kitchen project and i am unsure about the PSU size, thank you
Awesome. I am very interested in logistics on a set up like this. What would the signal chain be and what would I need to purchase from you. Assuming I have nothing? I can also send an email inquiry if that’s preferable.
After a bunch of research I’ve narrowed it down into 2 potential options. Something like this (more capable because of the custom programming options) or something that operates as a power supply into a decoder and then lights of sli RGWBs however that set up wouldn’t have all of the cool functions this has but would be a good deal easier to set up and program (I think)
OMG THAT RED SHARPIE MARK HAD ME TRIPPIN! CHECK YOUR CAMERA BRO!!! I wouldn't use any harsh chemicals. Not sure if rubbing alcohol or mineral spirits would be safe for camera lens. But marker on your camera lens.
Thank you. This is the only video I've seen showing which DMX channels are used to control the decoder's output to the pixels.
This is EXACTLY what ive been looking for! THANK YOU!
Very nice and interesting video
Great job with all the best information
Beautiful running lights
Great video. Thank you
Good morning, I just received mine a couple of days ago. Can’t wait to see it work! Having a problem figuring out how to hook up with 6803 chip lights. Also not sure about pin out for DMX to RJ45
I think you have to weld it. Note I new to this
Thank you for posting this video 🎉. You have a new subscriber. Keep up the great work 🎉.
Very nice.. How about if i used in commercial project do you have small standalone controller for this Spi decoder...
This is quite nice
It's actually what I'm looking for
This guys the Bruce Lee of LED’s yo !
Apik temen deneng pak...
Thanks Great English!
Wow good jobe😍😍😍
João da Águia compusitor Fortaleza CE eita essas luz e show
this is actually lit. cool vids
Amazing, love that controller
Very very Nice this Player to Digital Strip lights for my Club !!!! Thanx TThanxxxxxx
you bought already, thanks.
can sent us video for the effects
@@JUNPRO yes... i willl make a Video and send... Waiting :-)
thanks
@@JUNPRO i have send the Videos on "wetransfer" Please Download :-)
thanks
Nice 👍
0 seconds ago
Thank you for the video and all the helpful comments, is it possible to ,plug tubes to the decoder and create diferente patterns ? Instead of using Madrix? Since I’m a beginner,I love to create using more the fader
Very very good
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
Nice👍
This is EXACTLY ....
Amazing
Nice..
JUNPRO #1024Lspi #decoder #DMX #LEDstrip 您好..想請教...我想用2814的燈條編程...控台是ma2 請問可以使用這個dmx控制盒嗎.
Maximum how many led trip can we control by using king kong dmx light controller
สวยงามครับ
What brand of LED are these? Also does the LED controller work on a RGB based LED or is a signal wire required?
VERY NICE JOB !!!! NICELY DETAILED I UNDERSTOD EVERYTHING !!!!!
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
exelente señor junpro
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
@@JUNPRO i buy
This is very close to what I am looking for. At Christmas time I see displays where the strands work together to play a video. Can these do that?
Hello, do you have other alternatives besides ebay, or can I purchase directly in Florida !
Nice
Amazing😍😍🇮🇩🇮🇩🇮🇩
How many power supplies & controllers would you need for 16 strips, of about 32 feet long, ysing your equipment?
power supply are depend on your led strip
Super!
This would be awesome in a bowling strip floor
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
66wy uoe73462 6khu3i
@@fathimarabiya9635 very interesting 🤔
Super
Will it work with Arnet? Instead of using a DMX console, I want to use MADRIX or Resolume Arena.
Tertarik.....
Di indonesia sdh ada blm ya
Di mana belinya....
www.ebay.com.my/itm/JUN-PRO-DMX-Spi-Decoder-DMX-1024-Spi-Decoder-with-RJ45-XLR-Converter-Cable-/283843945840?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
so i’m looking to remotely control led light strands like these. but it is for a marching band. there will be a strand of led lights on each drum set. and i want to turn them on and off from the sideline during their performance. do you have any gear that can do that?
I bought two of these, but I can't figure out how to accomplish the rainbow effect at 10:17 of the video with the controller. The DMX mapping shows value 48-63 on Ch 5 as Rainbow Colour Changing... but all that seems to be to me is a crossfade between two colors? I can probably do with the light board but if there is a build in effect it would be easier.
at 10.17 is using program by King kong DMX controller colour shape effects.....
which type dmx controller u are using ?
@@JUNPRO Ok... where I’m installing there is going to have an ETC Ion controller running them. I can create the effect in the Ion, I just wanted to make sure it wasn’t pre-built into the encoder
It's simply great that running Pixels with DMX. Thanks for an informative video. Is there any franchise in India?
I am sri lanka pls price
Do you have a controller that can also do CCT?
best work!
Hello. Is there a way to do the same kind of lighting as in your video using freestyler and dmx?
What is that another cable loop led strip lights??
Hello Juno, do You have any software for 3D pixel ? XYZ ?
Nice!
does this controller work with the ws2815 chip?
EXELENTE estoy sorprendido.....gracias por compartir
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
Anjing
How did you hook up the external power supply. Great setup. Going to try it.
hook ?
just hide anywhere
which box Controls the Light movement for example (Sliding movement )
DMX controller shape generator
only work with king kong or can i use my dmx 3.0?
can
@@JUNPRO thank u
can the system support the microphone for music mode, it means, flashing the light according to the music
if your Dmx Controller can support music triger it can do it, like DMX 192
Which strip led has been used in the video? Could you please send me the link
www.ebay.com.my/itm/5-Meter-JUN-PRO-Digital-Spi-SMD5050-RGB-Pixel-Waterproof-IP65-LED-Strip-60L20P-/284254432007?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Does this only work with specific led tape?
Hi! I have a question.
I see you are using king kong 256B can I use king kong 1024 instead? Just learning about this so I don't know if that will work or not? Thank you
Hey my Friend, how much cost this set comple, but with 10 stripes ? Or how many stripes can i control with the controller? thank you.
Yeah I would ask that to.
Good Evening, Wiil this work with 6803 chips or do I have to change my whole project out?
Can suports 6803
Thanks so much! Great product!!
How abou the power. Could you please describe the power connection? Thanks
How you can adjust them to play along with the music?
hello
i need your help.
i have a DMX512 DECODER 32 channel with 8outs of RGBW+V where am connecting the strips. on this Decoder can i connect a led strip that is
WS2812B DC5V LED Strip RGB 1M 144 Pixels Smart Addressable Black PCB WS2812 IC Full Color ?
will it work?
thank you
this decoder is only support RGB colour spi LED strip
is support ws2812 ic led
Hi anh mình là người việt nam. Mình muốn trao đổi một số việc về mạch và led được không ạ
First of all thanks for making and sharing this video.
I have one question!
On the floor on the left there is a grey box component which has a cable. The cable seems to connect to each of the JUN PRO DMX SPI decoders.
What is it and it’s purpose in your setup?
That is a DC Power supply for each LED strip
Perfect thanks
Price
I want your control, it's great.
Poli sadanam
Does this have a white color led option ?
I want to buy it I want everything in this video just like this all included please send me a link where you can purchase this .... IM A SERIOUS BUYER
www.ebay.com/itm/283843945840
JUN PRO ok where can I get the led strips ? That link you sent is only the box
@@reminreyes8908 WhatsApp +60123218333
Where can I possibly get the Jun Pro
Good Sir 👍
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
Are the Cat5 ports able to receive DMX over ArtNet?
No , that cat5 is a DMX signal
Also need one more channel to set start position of led strip.
From we're to get this Jun pro spi led strip.controller sp
puedes poner el link de compra de todos los componentes? fuente de poder y demás cosas...
Where did you get the Channel Function list?? Is that specific to that decoder only? Or specifically those strip lights?
is our decoder buildin the effects
@@JUNPRO do you have a list about the available functions?
What led strip did you use? Ws2812b or? Which voltage? What about voltage drop? Do you connect just one side of strip or?
Is it our own custom make LED Strip is using 16703 ic , is only connect 1 side 12v Dc.
If using ws2812 5v will drop power
That’s badass
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
Please can you me send information to buy Two Pcs. jun Pro DMX ?
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
Can this be patched in to American DJ MyDmx3.0?
It support all DMX signal
Impresionante
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
this doesn't work for the apa102 since it has a separate clock line, does it?
can work with apa 102
@@JUNPRO you told me on ebay it doesnt work with apa102 ? Do you have a smiliar one for APA102?
Whatsapp me on +60123218333
Can we use the controller for the RGB stripes with the chip from EDISON?
all the spi ic chip is supported
what is the maximum length for each led strip
would you tell me, how many Amps your power supply has ? looks like 50 meters in total, with 5v leds ? i need 30m for my kitchen project and i am unsure about the PSU size, thank you
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F283690621218
Hi, it’s possibile to have the Price for 2 controller and 20 mt of strip led and power supply? Many thanks
www.ebay.com/itm/283690621218
JUN PRO item is no longer available :( and it’s only the controller. Can have another link?
Hi, what light strip do you use?
ws2812b
Awesome stuff. I’m an overly ambitious beginner. Could this be used with a DMXis to run a live back track with a midi output to control the lights?
yes，it support Dmx signal 14channel
yes，it support Dmx signal 14channel
Awesome. I am very interested in logistics on a set up like this. What would the signal chain be and what would I need to purchase from you. Assuming I have nothing? I can also send an email inquiry if that’s preferable.
im on the same page man...lets talk!! trying to program my live shows from my DAW as effectively and cheaply as possible!
After a bunch of research I’ve narrowed it down into 2 potential options. Something like this (more capable because of the custom programming options) or something that operates as a power supply into a decoder and then lights of sli RGWBs however that set up wouldn’t have all of the cool functions this has but would be a good deal easier to set up and program (I think)
How many pixels does it have and how many channels of dmx does this take?
it can support 1000 RGB pixel
and take 14channel DMX
Manual focus is your friend.
Does this work with any brand of LED tape?
yes
@@JUNPRO thanks.
woher bekommt man die LED Strips? (20M)
Que tipo de led tengo que comprar
👍🏻👍🏻👍🏻
Se puede utilizar para tira led rgb 5050 de 4 hilos a 12 v ?
Hi , can I have a price for each DMX LED Controller and Led pixel strip too
☞☞☞ www.ebay.com/itm/283843945840
☞☞☞ www.ebay.com/itm/JUN-PRO-DMX-...
☞☞☞ www.ebay.com/itm/283844033831
how many strips and how long of strips will this power?
1 decoder can control 1024 pixel
Ok what power source and what type are these lights ? Do you have a link on amazon for your product ?
Power input for the decodee is 12v ~24v
No at amazon
www.ebay.com/itm/283690621218
Ok not amazon . Ill buy some if you sell on amazon
Does any dmx controller work?
yes, all DMX controller can control thr 1024L decoder
does it work with ws2812B ?
OMG THAT RED SHARPIE MARK HAD ME TRIPPIN! CHECK YOUR CAMERA BRO!!! I wouldn't use any harsh chemicals. Not sure if rubbing alcohol or mineral spirits would be safe for camera lens. But marker on your camera lens.