You got all nervous for no reason!!! You did great. TIP… when going for the second press. Use parchment paper instead of the Teflon sheet. It will leave it smoother & less shiny. Do Not use the cheap parchment paper in the pop up sheets from Dollar Tree! It doesn’t have enough silicone on it to call it parchment paper.
Thank you for posting your successful and straightforward DTF Hack experience! I may pick up the Epson 2803 as my 8850 is on something else and does not play nice with transparency film. #ImTired LOL
@@thecraftycloset00 I lucked up on a donated 3760 at the Thrift store this week that I've been able to print on, just have to drain and switch out the ink to sub.
Great video, I tried this today with the same kit and I could not get the sheet to go through the printer. I will try again tomorrow! You've given me hope LOL!
I have a converted Epson ET-2850. I got it to start printing but then it stopped after printing only a tiny part of the graphic and pushed the sheet out. I'll try again at some point. I got frustrated! 😆 🤣 😂
Thanks for sharing this video! This has been by far the easiest video to follow. I've been confused watching some others. However, I ordered the kit and can't wait to use it. I'm a new subscriber to your channel as well. 🙂
It didn't but the outline on the gloves is black so that's why it looks transferred the glove is actually the shirt color which is white ☺. Thanks for watching
Yes I make my own setting because usually I feel like the recommended setting always seen either a little to high in temp or pressing time If you watch enough of my videos you will learn I seldom follow the recommended setting lol. As for washing it held up better then expected I have an update coming soon. Thanks for watching 😊
I’m curious to know how this looks after it’s washed. I’ve seen this hack before, but the person doing it used a different powder than you did and I don’t think they cured the transfer. But after they washed theirs, it faded drastically.
I haven't had to wash it yet, so hopefully it will hold up. Yes there are a lot of different powders out there. I will most likely use another powder for comparison. Thanks for watching 😊
Not sure I just bought a different dtf kit specific for dark fabrics (the powder is actually black) haven’t used it yet, I’m going to try it out and if it’s works do a video! Thanks for watching
No, it needs a light-colored shirt, as in white, sports grey, beige, pink or Easter colors. There is no white ink so it will not show up well on black, or dark colors. If you print in all black, dark green or blue, etc ink as in a black png image or just words on dark colors like navy, red, etc, it will be fine.
If your getting steaks then you probably need to do a print head cleaning I make several sheets of paper to get it right so don’t get discouraged. Thanks for watching ☺️
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
You got all nervous for no reason!!! You did great. TIP… when going for the second press. Use parchment paper instead of the Teflon sheet. It will leave it smoother & less shiny. Do Not use the cheap parchment paper in the pop up sheets from Dollar Tree! It doesn’t have enough silicone on it to call it parchment paper.
Thanks for the tips I have started using parchment paper recently. Thanks for watching
What brand of parchment paper do you use? Do you have to tape paper behind it?
@@MSims-ck3ou I use either Reynolds or the Aldi brand. Aldi is a better value.
I like your presence. You seem like a very kind person 😊
❤ I am so glad I found you.. now i know every crafter is not perfect and i can and will make mistakes. Thank you for keeping it real.
Glad I could help keep it real, cause that’s what I do lol ! thanks for watching!☺️
Thank you for posting your successful and straightforward DTF Hack experience! I may pick up the Epson 2803 as my 8850 is on something else and does not play nice with transparency film. #ImTired LOL
Trust me , after my 2400 bust I'm so glad I upgraded she hasn't failed me yet. Thanks for watching 😊
@@thecraftycloset00 I lucked up on a donated 3760 at the Thrift store this week that I've been able to print on, just have to drain and switch out the ink to sub.
I'm new to sublimation and I just found you. I just want to say I love your smile!
Thank you so much 😀, and thanks for watching
I agree her smile and vibe are awesome!
Great video, I tried this today with the same kit and I could not get the sheet to go through the printer. I will try again tomorrow! You've given me hope LOL!
Which printer do you have? Sometimes they can be moody 😂! Good luck and Thanks for watching
I have a converted Epson ET-2850. I got it to start printing but then it stopped after printing only a tiny part of the graphic and pushed the sheet out. I'll try again at some point. I got frustrated! 😆 🤣 😂
I had the same problem only the paper got stuck 😢
Tape the film to copy paper
I got it to work consistently by taping a piece of painter's tape in the center of the sheet from to to bottom. Yay!!!
I’m so excited to try this method. I just started sublimation but them polyester shirt get expensive.
Yes they can so this is the perfect work around. Good luck ! You got his ☺️! Thanks for watching
Yayy I'm so happy for you because I know the feeling! Haven't tried this yet but I got to try this
Thanks I was nervous nothing worse then messing up and wasting good materials lol . Thanks for watching 😊
Thanks for sharing this video! This has been by far the easiest video to follow. I've been confused watching some others. However, I ordered the kit and can't wait to use it. I'm a new subscriber to your channel as well. 🙂
Glad you enjoyed it and thanks for watching and subbing ☺️
Hey it looks great!! How did you get the gloves to turn out white? I thought white didn’t come out on sublimation Dtf.
It didn't but the outline on the gloves is black so that's why it looks transferred the glove is actually the shirt color which is white ☺. Thanks for watching
Results after washing please 🥺
Thanks for sharing, how does it look after being washed?
It still looks good a slight fading and I do mean slight I’m still wearing it! Thanks for watching ☺️
Great Job!!
Thanks! and Thanks for watching!
I noticed your time and heat settings were a little different than what I've seen in most other tutorials. Did this shirt do well in the wash? Thanks!
Yes I make my own setting because usually I feel like the recommended setting always seen either a little to high in temp or pressing time If you watch enough of my videos you will learn I seldom follow the recommended setting lol. As for washing it held up better then expected I have an update coming soon. Thanks for watching 😊
very helpful looks good...
I for sure need to try this!!!! What did you search for this type of image in Etsy?? ie., dtf image, svg, or png?? Thanks so much!!!
These were png images. Thanks for watching 😊
Hello, please I need your help 😄 .. You print it on a regular printer, but do I need pigment colors or some special refills? Thank you for the answer.
You just need a regular printer that takes inkjet cartridges no special colors just a regular printer 😉! Thanks for watching 😊
Great job
Thank You and thanks for watching
You did awesome
Thanks for watching ☺️!
Thanks for this review! How have your shirts held up in the wash?
Better than expected I actually have a wash update video posted on them 😊! Thanks for watching !
Can you do this and use it on glass tumblers? I am typing as I am watching so sorry if I haven’t gotten to that part yet.
not this method , this is only for shirts thanks for watching
I’m curious to know how this looks after it’s washed. I’ve seen this hack before, but the person doing it used a different powder than you did and I don’t think they cured the transfer. But after they washed theirs, it faded drastically.
I haven't had to wash it yet, so hopefully it will hold up. Yes there are a lot of different powders out there. I will most likely use another powder for comparison. Thanks for watching 😊
What system do you use to design the image? Can I use the same circuit system I use for sublimation?
The images I used were from etsy , yes you can you sublimation images as long as they are png files. Thanks for watching!
Sweet! Do you think it can be done on a dark color shirt if you were to add powder 2 times between curing?
Not sure I just bought a different dtf kit specific for dark fabrics (the powder is actually black) haven’t used it yet, I’m going to try it out and if it’s works do a video! Thanks for watching
No, it needs a light-colored shirt, as in white, sports grey, beige, pink or Easter colors. There is no white ink so it will not show up well on black, or dark colors. If you print in all black, dark green or blue, etc ink as in a black png image or just words on dark colors like navy, red, etc, it will be fine.
Hi, what print settings should you use to print on DTF sheets with a sublimation printer? I get streaks with the black color. Thank you.
If your getting steaks then you probably need to do a print head cleaning I make several sheets of paper to get it right so don’t get discouraged. Thanks for watching ☺️
Awesome 🎉! Was there any heavy chemical smell when heating or after pressing?
No not for me at least. Thanks for watching 🤗!
Hi….Will sublimation ink work for this? Or does it have to be in DTF INK?..plz help..THANKS!
This was printed on a sublimation printer using sublimation ink, If you want the DTF effect you will need to use the DTF powder. Thanks for watching
❤ love it
What color settings are you using
I use presentation paper matte! It’s the best color setting for vibrant prints when using a sublimation printer! Thanks for watching 🙂
What kind of paper is that
It’s dtf film paper it came with the kit. Thanks for watching ☺️
Whats the result after wash?
Not the best but not the worse either better then I expected , I have an update on it coming soon. Thanks for watchig
So that sub ink but dtf hack?
Yes it’s my Ecotank (converted) sub printer and the DTF powder. Thanks for watching
Mines keep shooting the paper out
You can try to put a piece of computer paper behind it when you feed it into the printer
Some put painters tape on top edge to keep DTF straight
My paper got stuck in my printer 😢 why???
Which printer are you using?
Same. I have an epson 8550
I know it’s 5 months later but I bought a dtf sheets with a backing pad that sticks to the DTF so it can go through the printer
@@falandriathomas8276 I have the 8550, hope you got it working.