Vedio What To Do If Your Laptop Is Plugged In But Not Charging ..2 simple Ways to FIX Battery
HTML-код
- Опубликовано: 7 май 2021
- God bless you
#battery_not_charging
#Translated_video
#0%_available_plugged_in,_not_charging
We talked in a previous video about recovering a #stopped_charging #laptop_battery
Today we will use the easiest method and materials available to restore a #damaged_battery
This laptop has not been used for a while and the battery has #stopped_charging
It took us over an hour to charge the battery
But it remained at 0%.
After another 10 minutes it's still 0%.
The laptop battery stops working sometimes due to not being used for a period of time
In the previous video, we used a more powerful charger than the original laptop charger
Meaning if the original charger was 3 ampere, for example, we will use a charger greater than 4 ampere
We can use a 10A charger if available without fear
Taking into account the stability of the voltage used in the original charger
Meaning using a charger with the same voltage, but with a greater ampere capacity as much as possible and available
And now we have a question. What happened when we did not use the laptop for a period of time?
Why did the #battery_fail?
Simply because it's a #lithium-ion_battery
It gives us a voltage of 3.7 and has two properties when charged and when discharged
When recharging, you should stop when it is 4.2 volts
More than that is called over charging and it leads to a change in the internal resistance and damage to the battery
And when the battery is discharged, we must stop drawing at about 2.6 volts
Going down the voltages more than this is called over des charging
The lithium battery has another property called self-loss 2-4%
If we stop using it for a while, it will lose its charge automatically
If it falls below the threshold called over des charging, it will be damaged and will not work again
Now we will #simply_fix_it
We will remove the battery and take off the outer cover
We can use some benzene to make loosening, but it will affect the plastic
The cells are connected in series to give the total voltage
At both ends there is a positive pole and a negative pole
We will provide an external source of electricity with a voltage of 12 volts and a suitable ampere
We can use power of the desktop computer
The black wire with the yellow wire gives us a good voltage of 12 volts and amperes
We connect the negative pole to the negative terminal and the positive pole - yellow - to the negative terminal
Leave it on for about 10 minutes
Then we disconnect the electricity and re-install the battery
Then we test the laptop to see if the situation changes
Now the battery has charged 1%.
We have succeeded
We leave the laptop in charge to check if it will complete the charging
Now the battery has been charged 7%
Now I have a question
Why did you turn off the laptop while charging?
Simply because it is the best way to charge the battery
The best battery charge while the laptop is off
Now, after about two hours, the battery is 100%.
We have finished the work now
We have succeeded
may God give you happiness
الله ينور يا بشمهندس
good job