That's because its sucking cold air back into the engine, extremely bad on them and will burn up valves quickly. But he will probably destroy the Tahoe long before that.. lmao
Did this to my 01 ram with the 360. I like how those motors sound. It's more of a deep sound. And everybody does it with these trucks and they all sound the same.
You have a big rust spot on the side right where the pipes should come out you should just get a small sheet of steel cut two holes in it and you’ll have cheap way of a custom look for side pipes
My first car was a 99 Tahoe, finally had the realization last week that she wasn't worth the money it would've taken to get her back to where she deserved to be. Make my baby proud with this one, Mike
So happy you posted this, the weld behind the catalytic converter complete broke and now I thought I was going to have to take it somewhere so they could repair it until I watched this video, definitely saved me some money!!
THE SS717 MAN VAN Reminds me of your old videos.... cool diy for a high school kids first truck when you only work 15hrs a week diy is your best friend
As a suggestion to a lot of people who want to chop off a muffler and realize its pretty loud when you do that, put a small V shaped cut in front of the muffler to give it small amount of sound with the option to make it louder at a later time or to undo it with a sleeved exhaust clamp.
I had a magnaflow exhaust setup sitting in my garage forever for this truck and 2 weeks after I finally cut it up and scrapped it you got this ol girl... what the hell Mike 😂😂
J P yes I was thinking the same, the side exhaust is going to look hideous and the way he has it now he’s gonna get carbon monoxide poisoning if he’s in it idling for too long lol. The stock exit out the rear with a muffler delete would look clean and still sound great.
wow I'm surrounded by dumbasses...never seen a sport car with a truck chassis nor a crown vic...you can put anything on a truck chassis doesn't mean its a truck. BTW they make jeep trucks incredible...
It's a truck as far as interchangeable part's go also you can fold the rear seat flat n you'll have a bed to haul shit around just like your average truck can so technically it's a truck
Hey Brother I have a 97 Silverado rear wheel drive I live in Oklahoma I cut the cats off and ran a Flowmaster Super 40 dual 2-inch dual 2 inch out dumped for the entire thing I think I paid around $300 and that's getting the back sensors deleted I still have my front sensors I get a lot of compliments on it it's weird you didn't talk about you having front sensors before the cats and we have the same engine and year and I promise you mine sounds a lot better still love your Channel😎
Lawson industries Insynerator race series muffler. 3in center inlet and 2.5 dual outlets, it sounds close to a flowmaster 40 series. Just has more tone to it, I paid $1800 installed, kept all sensors that was about 11 years ago. I just looked it up and the muffler itself is $45 bucks on amazon.
Nice video! I mostly work on Chevy silverado cause it’s the best truck out there in my opinion or any kind of Chevy truck. But this is amazing what ur doing! I plan to do the same with my 2006 Chevy Silverado 3500
This is the exact exhaust setup I had in high school on my two door Tahoe for like a year because I was broke and couldn’t stand how quiet the truck was. I just took two exhaust turn down tips with exhaust clamps and bolted them on there
Not quite sure whats all getting done to the 720 last I knew it went in to get serviced. And the grandpa build is at @latemodelracecraft look them up on Instagram you can see pics.
I honestly think you are having more fun with this cheap build than you where when you were spending tons of money. I really appreciate cheap builds like this.
Mike and power tools. Reminds me of the part in step brothers when they were building the bunk beds and the dad hollers at them about “no power tools”. Huh, what, oh we’re about done”
Dude! I can't believe the beginning of this video. I get comments ALL THE TIME about how I need to stop calling my 1995 GMC Suburban a 'TRUCK'! It says 'GMC Truck' right on the tail gate. Built on the same platform as the pickup models. I basically call the Burb a crew-cab with a permashell which is exactly what it is! Can't wait to see what you do with this thing. I'm currently planning a build for my '95. Will all be filmed of course. #obsftw
small truck? anything with an open bed, full frame, RWD, 4WD is a truck. Those Honda Ridgelines are a Unibody they have FWD or AWD and the transmissions are made of glass.
Did the same for my truck just used the elbow going over the axle and cut it just right to come out in front of the tire with a dual tip for 5$ sounds amazing
My 95 blazer I had in high was the shit. This makes me miss it so much. I love this project. Also the frame is based off the Silverado. Sooooo it’s a truck. 😂😂
$0 do it yourself beater blazer exhaust> Expensive McLaren 720s exhaust
Mclaren makes the worst sounding v8s
@@rodgersb1248 yeah... They do sound real unpleasant.
At least the 600LT sounds good but still not great.
One hell of a deal for 1500 bucks 👍🏻
It's unbelievable, those Firestone tires might be worth half the price of the whole truck. Awesome deal!
I wanna like this post but its at 69 likes. Like this instead
Rust + eyeball = BAD ✔️
Your overhead costs of making videos just decreased by 900%
Mike, run up to about 35 in second gear and then let off. After coasting for about 5 seconds, it’ll start really popping and cracking.
I do that all the time 😂. Well before I made my truck a desert specific truck. Its no longer my daily.
That's because its sucking cold air back into the engine, extremely bad on them and will burn up valves quickly. But he will probably destroy the Tahoe long before that.. lmao
I do that all the time on my 94 Dodge Ram
Caused by a lean condition that will roast the valves and seats
How to make exhaust sound good:
1) V8 swap your car
2) straight pipe it
2:01 In the northern hemisphere you even wash the inside of your rust holes.
If you dont want mud (or Rust chunks) all over your garage floors you had better.. lmao
I wonder how many people are going to try this 🤔
I've done it already to my 96 2 door Tahoe 4x4
I already called my son and told him " do not cut the fucking exhaust off your Tahoe".
Did this to my 01 ram with the 360. I like how those motors sound. It's more of a deep sound. And everybody does it with these trucks and they all sound the same.
@@andrewhughbanks4408 I have a 97 Dodge ram with the 318 and its actually very loud and sounds nice at idle.
Investing Hustler people have been doing this for a long time?
Drinking challenge: take a shot every time Mike says Truck.
sounds like a old $500 farm truck that needs a muffler :)
That because that's what it is.😄
no it's a $1500 truck that needs a muffler lol
Sounds like complete garbage!!
He needs to move out of pa so he can cut the cats
That way itll sound way better
Mike, the type of guy to lease a 97 tahoe.
Cam, small lift, 33x12.50. Done. Lol
Wait, two cams?
Chase Larson adding an additional cam guarantees a 1000hp capable motor
While you’re at it add another crankshaft. Triples your hp by doubling your pistons. Simple math man🤣
Dual cams?
Short term memory loss too ?
Flowmaster 40 with cat delete on my 93 Blazer. $150 and it sounds badass
Same on my 92 k2500
You have a big rust spot on the side right where the pipes should come out you should just get a small sheet of steel cut two holes in it and you’ll have cheap way of a custom look for side pipes
LOL Legit!
Well played my friend! Awesome example,no need to spend $ when the whole project is low budget. It's simple, back to the basics and I love this build!
My first car was a 99 Tahoe, finally had the realization last week that she wasn't worth the money it would've taken to get her back to where she deserved to be. Make my baby proud with this one, Mike
Love this blazer build! Great content as always, thanks Mike!
Hows it a build u dick it's a dismantle
Drinking game, take a shot every time Mike says truck in this video
So happy you posted this, the weld behind the catalytic converter complete broke and now I thought I was going to have to take it somewhere so they could repair it until I watched this video, definitely saved me some money!!
Only thing I have to do is take everything out and buy the elbow and the clamps so I don’t get carbon monoxide poisoning
Man not gonna lie these videos make my day better
Now your no longer welcome/ legal in California, be thankful
California is going to break off and disappear into the ocean in a few years anyways, so no worries!
Good, fuck California.☺
I have my exhaust cut in California and have never been pulled over. And I have the most noticeable car. Don’t be a pussy
@@greatestever515 ur a Pussy for living there, liberal
God bless America except California
Glad I live in a province where catalytic converters aren't required and inspections aren't a thing
Same
gang
Same
I'm not even a off-road guy but dude I'm stoked for this
THE SS717 MAN VAN Reminds me of your old videos.... cool diy for a high school kids first truck when you only work 15hrs a week diy is your best friend
I love it my boy mike keep up work and love video and I love blazer lot and Chevy gang all day 💯💯👍
Absolutely a truck! It's a 1500 Silverado with a covered back seat!
As a suggestion to a lot of people who want to chop off a muffler and realize its pretty loud when you do that, put a small V shaped cut in front of the muffler to give it small amount of sound with the option to make it louder at a later time or to undo it with a sleeved exhaust clamp.
Love your videos keep up the great work I’m glad to see someone is going back to there roots were they can just have fun and beat in a beater
Mike would be the one to start from the bottom and move to the top of the truck
Y'all should name the farm "Ram Ranch 69"
I had a magnaflow exhaust setup sitting in my garage forever for this truck and 2 weeks after I finally cut it up and scrapped it you got this ol girl... what the hell Mike 😂😂
Keep up the great work. Sending some love from Houston Texas
Keep the original tail pipe, have muffler shop weld in a Y
That’s what i did with my 98 sierra
J P yes I was thinking the same, the side exhaust is going to look hideous and the way he has it now he’s gonna get carbon monoxide poisoning if he’s in it idling for too long lol. The stock exit out the rear with a muffler delete would look clean and still sound great.
had it done on my truck for $75, sounds awesome
it's a truck it has a frame and not a monocoque chassis. So by definition it's a truck.
Is a crown vic a truck then? Just sayin'
With that logic so is a jeep wrangler.
then by your logic if a sedan or sports car with a truck chassis is a truck.
wow I'm surrounded by dumbasses...never seen a sport car with a truck chassis nor a crown vic...you can put anything on a truck chassis doesn't mean its a truck. BTW they make jeep trucks incredible...
It's a truck as far as interchangeable part's go also you can fold the rear seat flat n you'll have a bed to haul shit around just like your average truck can so technically it's a truck
That is a bad ass truck. Keep up this build its an interesting one
I really like this series man!! Super cool.
Count how many times he says "truck"
Or take a shot..
I've got 20 in the first 4 minutes
42
Who cares
What are you talking about Buddy? You still got a lot to learn with these old trucks!!
“My neighbor with his table saw out “ as you rev V8’s and diesels all day everyday 😂😂😂
I did that same thing to my 2016 Ram 1500 and it sounded badass!! Good thinking Mike!!
Everybody thinks this is a free mod but then you end up paying twice as much on gas
B Pimpin It’s because you’ll be driving way harder than usual. Who isn’t gonna want to hear the engine more.
riley howell when you drive an off-road based truck, you don’t worry about gas mileage, cause it’s not gonna be good anyway.
you should buy some tint from auto zone and do it yourself
Been wanting to do this to my truck for a long time thank you
This truck is gonna take you well over a million subs for sure
StreetSpeed and I have the same broom
Streetspeed717 is the type a dude to buy a rusted out truck about to fall apart and say it’s in mint condition
But it is tho
I did that same thing to my 95 Yukon with the 5.7L TBI and I don't regret it. And surprisingly, my gas milage stayed the same if not got better!
Get a sticker "my other car is a McLaren" Nobody is going to believe you! 😂
A manual transmission in that would be sick.
@God emperor Trump I have an NV 4500 in my 97 Suburban. 6 inch lift 35 x12.50 x 15's
steven reynolds sweet truck man
Hey Brother I have a 97 Silverado rear wheel drive I live in Oklahoma I cut the cats off and ran a Flowmaster Super 40 dual 2-inch dual 2 inch out dumped for the entire thing I think I paid around $300 and that's getting the back sensors deleted I still have my front sensors I get a lot of compliments on it it's weird you didn't talk about you having front sensors before the cats and we have the same engine and year and I promise you mine sounds a lot better still love your Channel😎
Lawson industries Insynerator race series muffler. 3in center inlet and 2.5 dual outlets, it sounds close to a flowmaster 40 series. Just has more tone to it, I paid $1800 installed, kept all sensors that was about 11 years ago. I just looked it up and the muffler itself is $45 bucks on amazon.
I adore the 2-door Tahoe/Blazer from the 90’s it’s a car with a super strong character!!!
That thing is beastly 😁😁😁😁love the vids mike
Then its also a TAHOE my guy! ....check that owners manual
1995 is when that blazer had the name changed to tahoe.
Ricardo The PC Wizard I don’t believe that’s completely accurate as they still had a blazer until 2005
SS King s10 blazer
@@adamperry6133 the S10 Blazer is what you're talking about. This Blazer that Mike has is a K5 Blazer.
The owners manual he pulled out said tahoe/suburban. It's a Tahoe.
SUV is a truck built on truck chassis it's a truck buddy totally agree with you
Yasssss. You took the shot at parker that everyone was hoping for.
Did this on my 97 c2500 silverado about a year ago. Sounds so mint👍
I'd recommend using an angle grinder to cut it just so its not as sloppy of a cut
Truck frame, truck motor, truck suspension, Seems like a truck to me! By the way been loving the vids lately, Keep it up!
Looks exactly identical to my 98 k1500
That's exactly what makes it a SUV by definition!
Sounds pretty good Mike
Hey man love the blazer content my favorite videos yet!
Take it to an exhaust shop and get a true dual system. $300 tops
Are any of your tools cordless lol 😂
Negative lol
Mike can't afford those magical, futuristic tools. I think cordless is just a Fad. Like Cell phones and the internet.
Cordless tools suck. The batteries don’t last for shit.
Let It Reign that’s what chargers are for lol
@@Bsaint not for the brand he is using.
Nice video! I mostly work on Chevy silverado cause it’s the best truck out there in my opinion or any kind of Chevy truck. But this is amazing what ur doing! I plan to do the same with my 2006 Chevy Silverado 3500
This is the exact exhaust setup I had in high school on my two door Tahoe for like a year because I was broke and couldn’t stand how quiet the truck was. I just took two exhaust turn down tips with exhaust clamps and bolted them on there
We’re the 720? And grandpa
Not quite sure whats all getting done to the 720 last I knew it went in to get serviced. And the grandpa build is at @latemodelracecraft look them up on Instagram you can see pics.
Its not the weather for either of them though so thats why he's letting them take their time.
The 720 is in Florida
@@scottford9277 how'd I miss that, Why is it there?
Chase Larson he said it in one of his last few videos. I think he’s going to Florida for some event so he shipped his mclaren there
I’m lost. Where’s the Mclaren?
Florida
Love this series
I honestly think you are having more fun with this cheap build than you where when you were spending tons of money. I really appreciate cheap builds like this.
That's almost exactly what ours sounds like except ours is a 96
Landon Neff Vlogging & Gaming I have a 99 with just a hole in my exhaust and sounds a little deeper lol
@@arron8969 mine has like nothing wrong with it we have a different exhaust system
Watching this in California
Kevin hey me too!!
😂😂 Must suck
WOW your COOL!! didnt know Cali Snowflakes watched Mike's channel? HAHAHAHA
John Ranieri lol have you ever stayed in cali?
Quan Solo what must suck??
Mike you are so close to 1 million subs keep up the good work
Mike and power tools. Reminds me of the part in step brothers when they were building the bunk beds and the dad hollers at them about “no power tools”. Huh, what, oh we’re about done”
I hate people who get mad when you call a suv a truck and get over it internet
that's what mike bought but he keeps calling it a truck when its blindingly obvious that it's an suv.
It's not good, you really should get a muffler
Agreed sounds like butthole. Hardly even louder either.
@@BUILTDIESELMAFIA sounds like freedom brother
@@brandonlittlejohn4565 nope just butthole.
nice new truck and so nice blazer and but i thank that the duramax needs some love though
Dude! I can't believe the beginning of this video. I get comments ALL THE TIME about how I need to stop calling my 1995 GMC Suburban a 'TRUCK'! It says 'GMC Truck' right on the tail gate. Built on the same platform as the pickup models. I basically call the Burb a crew-cab with a permashell which is exactly what it is! Can't wait to see what you do with this thing. I'm currently planning a build for my '95. Will all be filmed of course. #obsftw
No way you got that truck for $1500! (unless you got it from a relative)
Why? I got my 07 f150 3 years ago for 1k. 4x4 worked only had surface rust only had reverse but it still moved. 4.6 too so a great motor.
Car youtubers like to downplay the prices of their vehicles. They try to make it seem like they always get amazing deals. Car guys in general do this.
I say its a van 😂😂😂😂😂😂😂
Or a mid size sedan.
It wouldn’t be a sedan because it’s 2 door
Enrique Espino lmfao that’s how people hate on suvs 😂😂
@@danielskinner773 😂😂
Van coupè
I’m hype for this build
My 2000 Blazer with the 4.3 Vortec has no muffler and it sounds great and isnt too loud.
People say the Ridgeline isn't a truck.... The definition of a pickup truck is "A small truck with an enclosed cab and open back" .. So....
So my long bed truck with a camper shell is no longer a truck? Interesting 🤔
@@slumpnmyrump4986 A camper shell doesn't come from factory
small truck? anything with an open bed, full frame, RWD, 4WD is a truck. Those Honda Ridgelines are a Unibody they have FWD or AWD and the transmissions are made of glass.
Ricardo The PC Wizard 😂
People still want to argue yet its literally the definition.......
Fake news
Spends first two minutes of the video making sure everyone knows yes it is a truck and yes it is dirty. Classic McLaren/VW owner right here. 😂👌
That thing is sweet man. I want a old two door bronco.
I barley sub and u already posted a new video
wow that sure is wheat
@@6n2_tim Lmfao
When my buddy cut the muffler off his truck his mpg got better
yeah its a lot less restrictive
Obviously. But his ears is whats going to bring down those mpgs.
It does make it better, but the only reason it would be worse is because you’d be stepping on the gas more to hear the exhaust sound
I’m starting to watch your videos again cause all the other videos you make are the same so finally something different on the channel 👍🏽
Moar Blazer please! I just love the iconic look of 80's-90's Chevy trucks/pickups!
Not a truck
Not a truck!
Muskyhunter ya it is
Muskyhunter I bet u wanna build a badass truck but ur a fat piece of shit and can’t
zane dunn LMAO you told him LOL 😂
Muskyhunter That is a K5 Blazer, AKA Tahoe. it is built on the same frame as the C/K 1500 Pickup trucks. And it uses the same Engine/Transmission.
@@RicardoPCGamer Which makes it an SUV..🙄
I did the same exact thing on my 06 Silverado and I love it
I saw this pic on insta and was so ready for the vid
Did the same for my truck just used the elbow going over the axle and cut it just right to come out in front of the tire with a dual tip for 5$ sounds amazing
I'm doing this to my Roush right away. This is gonna be awesome!!!
Street Speed 717 Great Video I think you're Trailblazer sounds awesome
My 95 blazer I had in high was the shit. This makes me miss it so much. I love this project. Also the frame is based off the Silverado. Sooooo it’s a truck. 😂😂
man i’m excited to see this thing a year from now
Love the music in the background
Mike just go all out with it! WHAT THE HELL lmao I wanna see these built up I never see em built they all just beat to hell where I live
Love the sound of a good ole small block tree fiddy