How to Replace Rear Wheel Hub Bearings 2012-2017 Toyota Camry
HTML-код
- Опубликовано: 20 авг 2024
- Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASH...
This video shows you how to install new rear wheel hub bearings on your 2012-2017 Toyota Camry. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/obFi/1A...
• Pry Bar 1aau.to/o8e/1AX...
• 14mm Socket 1aau.to/ob5k/1A...
• 17mm Socket 1aau.to/ob5k/1A...
• 21mm Socket
• Acetylene torch
• Needle nose pliers 1aau.to/oIQ/1AX...
• Needle nose pliers 1aau.to/oIQ/1AX...
• Pliers
• 1/2 Inch Impact Gun 1aau.to/oyb/1AX...
• 3/8 Inch Impact Gun
• Air Chisel
• 1/2 Inch Breaker Bar 1aau.to/orI/1AX...
• Torque Wrench 1aau.to/oa9y/1A...
• Anti-Seize Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oa2a/1A...
• Safety Glasses
• sanding disc
• Floor Jack 1aau.to/oavQ/1A...
• Hammer
• Jack Stands 1aau.to/oahR/1A...
• Large Hammer
• Wire Brush 1aau.to/oxJ/1AX...
Subscribe: / @1aauto
For More Info visit us at 1aau.to/h/fUn/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
This was the first job in years that beat me. Nothing I did would get this thing to move. Finally gave up and had a shop remove it. Appreciate not making it look like oh and it just pops right out. So easy anyone can do it.
I have been doing this for many years!Easy as pie!Of course a lot of people don’t know how to do things like this and need to learn!
I have a 2013 Camry and had to change the rear bearings. This video is 100% accurate how difficult it is to separate the bearing hub from the plate. A torche and a heavy hammer separated it. But damaged the back plate. Now my emergency break pads slightly squeak.
Thanks for the tutorial. Im no mechanic but my hubs are super bad and i have to replace them real soon. I would have been a lot more worried about doing it myself if it weren’t for your video so much appreciated.
+@user-fv9px7rf2t Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I enjoyed this refresher lesson. I’m getting a little older and can’t do what I used to but you exercised my brain as I followed along. I found it a bit funny when you couldn’t break that bearing loose from the backing plate and had to resort to heat and an impact chisel. Reminded me of the good old days! Thanks for not editing that out. Did you put the star wheel in backward? The long side of the spring is designed to clear the teeth on the star wheel. You had the spring on top of the teeth. 🙀 Thanks again. 👨🏽🦳
Always plan a new backing plate in this job. They are relatively cheap considering.
Why not just replace the backing plate ? Seems like alot of work to get the bearing out.
Well, detailed video thank you. You have covered all the problems that a tech could encounter.
Yeah the dust shield needed replacing anyway
Good video. I will buy new the plate of shoes and need less time in the repair it. Other I try is with a sliding hammer, like use with axe and try pull out. 🙏🙏🙏🙏
Where can I buy the dust shield and backing plate?
Do,do I need a new alignment after?
Would a bad hub cause a rough sound?
Dude, you did not clean the brake shoes after you put them back on. They have now copper paste on them from your gloves. Quite sloppy.
Waisted time for rusted backing plate
lol that whole thing was rusty u stil put it bak