Be sure to subscribe for more tool and car repair videos! ruclips.net/user/BigDog50001 The Big Dog 50001 Automotive Channel Store can be found here: (This channel earns a small commission for purchases made through these links) www.amazon.com/shop/bigdog50001automotive twitter.com/BigDog50001 instagram.com/bigdog50001/ Tools in video: (This channel earns a small commission using these links - at no cost to you) Blue Point BET7: bit.ly/2X7frgt Lisle 52990 Spark Plug Pliers: amzn.to/2H0dfwU Hanson 48 Piece Extractor Set: amzn.to/31wUQ2Q SK 6640 Plastic Clip Removal Kit: amzn.to/2TlCPS0 Snap-On 1/4" Ratchet TLLF72: bit.ly/2L4ztAS Lang 2583 Wheel Stud Restore Kit: amzn.to/31tekoN Mayhew 61366 Dominator Pry Bar Set: amzn.to/2TkVvBr Hansen 92003 3 Row Socket Tray Set: bit.ly/2XsGSAG Hansen 1202 1/2" Metric Socket Tray: bit.ly/31P8QG3 Hansen 1201 1/2" SAE Socket Tray: bit.ly/2FFfW6H Viking Mechanic Length Drill Bits: amzn.to/2GWc0yQ Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses or automotive questions.
Dave excellent video. Happy Fourth Of July. I remember when all the tools I purchased were made in the USA. Now I have to keep up with you and purchase something new. Snap-on just replaced my 24oz brass mallet that shattered while doing my Honda CV axle no problem. I could live on that truck. Enjoy your coffee and the Fourth Artie 🇺🇸 Dave I hung around and I still have the Roger Penske tach and dwell tune up kit from 1974 along with the hardcover version of the Chiltons manual for my 68 Mustang I wish I still had. Will post some pics. 👍👍👍
Great to buy in USA tools! Happy belated 4th Dave! Oh yeah and I paid 3 times as much for my SnapOn pry bars as Mayhew. Hey the Snap On guy needs to feed his family!
Almost a certainty that I will never own any of these tool but damn if I don't enjoy the hell out of your tool videos! Snap-On eh? Never know, you might break down and buy a Corvette some day! Excellent video as always my friend.
It you take pride in buying US made products do a quick research on the FTC's guidelines on what is to be considered Made in USA. Just because you see the American flag or USA doesn't necessarily mean it's Made in USA. I'm Mexican American but I take pride in buying American as much as possible. You should as well if you're American.
I recently bought a CDI torque wrench and it arrived defective, missing the ball that holds the socket. Funny that it came with an inspection sheet, obviously that is B.S. because it was defective from the factory. It left me a sour taste with CDI.
Because It says "Made in USA" not "Assembled in USA" AND says "of global components" That means they were made here from foreign steel except for the drill bits of course. Most likely the case wasn't made in the USA either as most blow molded cases aren't. They are as hard to make as a milk jug but it's cheaper because they don't make the volume needed to keep the machinery busy enough.
The Snap-on TLLF72 1/4" flex head is tested to 80 ft lbs and the TLL72 (solid) is rated for 90 ft lbs. My Snap-on rep tested it to 100 ft lbs and Eric's Snap-on tour video his rep also tested it to 100 ft lbs.
Be sure to subscribe for more tool and car repair videos!
ruclips.net/user/BigDog50001
The Big Dog 50001 Automotive Channel Store can be found here: (This channel earns a small commission for purchases made through these links) www.amazon.com/shop/bigdog50001automotive
twitter.com/BigDog50001
instagram.com/bigdog50001/
Tools in video: (This channel earns a small commission using these links - at no cost to you)
Blue Point BET7: bit.ly/2X7frgt
Lisle 52990 Spark Plug Pliers: amzn.to/2H0dfwU
Hanson 48 Piece Extractor Set: amzn.to/31wUQ2Q
SK 6640 Plastic Clip Removal Kit: amzn.to/2TlCPS0
Snap-On 1/4" Ratchet TLLF72: bit.ly/2L4ztAS
Lang 2583 Wheel Stud Restore Kit: amzn.to/31tekoN
Mayhew 61366 Dominator Pry Bar Set: amzn.to/2TkVvBr
Hansen 92003 3 Row Socket Tray Set: bit.ly/2XsGSAG
Hansen 1202 1/2" Metric Socket Tray: bit.ly/31P8QG3
Hansen 1201 1/2" SAE Socket Tray: bit.ly/2FFfW6H
Viking Mechanic Length Drill Bits: amzn.to/2GWc0yQ
Want a free Big Dog50001 sticker? Send an email to bigdog50001@gmail.com requesting a sticker. Sorry, no international addresses or automotive questions.
Lisle (rhymes with smile) is a family company in Iowa.
I like Lisle products, thanks for the input!
Good video thanks for sharing
Thanks!
Nice tool haul
I just bought a few of the same products, completely agree on the small prybar over using a screw driver. Doing my best to buy USA.
Thanks for the input!
All USA tools just in time for an all USA holiday. Happy Independence Day.
Happy 4th Wyatt!
Dave excellent video. Happy Fourth Of July. I remember when all the tools I purchased were made in the USA. Now I have to keep up with you and purchase something new. Snap-on just replaced my 24oz brass mallet that shattered while doing my Honda CV axle no problem. I could live on that truck. Enjoy your coffee and the Fourth Artie 🇺🇸 Dave I hung around and I still have the Roger Penske tach and dwell tune up kit from 1974 along with the hardcover version of the Chiltons manual for my 68 Mustang I wish I still had. Will post some pics. 👍👍👍
Happy 4th! Thanks for the comment!
I have that ratchet, cant live without it. I also have the snap on branded LH drill/extractor set, best extractors I've used.
Thanks for the input!
Great to buy in USA tools! Happy belated 4th Dave! Oh yeah and I paid 3 times as much for my SnapOn pry bars as Mayhew. Hey the Snap On guy needs to feed his family!
Happy belated 4th to you too Mike! We have to help out that Snap-On guy lol!
Great video as always. Where do you keep all these tools!? 😂
I'm gonna have to build a second shop just to store my tools lol, thanks for the comment!
@@BigDog50001 Hahaha!
Big Dog, thanks for another great tool video! Your socket drawer looks great too...nicely organized and neat. Thanks again for sharing. 👍🏻
Thangs, I appreciate the comment!
Almost a certainty that I will never own any of these tool but damn if I don't enjoy the hell out of your tool videos! Snap-On eh? Never know, you might break down and buy a Corvette some day! Excellent video as always my friend.
Thanks Radical Renegade! Maybe one of these days I'll buy a Corvette!
It you take pride in buying US made products do a quick research on the FTC's guidelines on what is to be considered Made in USA. Just because you see the American flag or USA doesn't necessarily mean it's Made in USA. I'm Mexican American but I take pride in buying American as much as possible. You should as well if you're American.
Thanks for the input!
I recently bought a CDI torque wrench and it arrived defective, missing the ball that holds the socket. Funny that it came with an inspection sheet, obviously that is B.S. because it was defective from the factory. It left me a sour taste with CDI.
Great video and Happy Independence Day Brother
You too, thanks!
great tools, I wonder if an ohm meter on the craftsman pry bars would tell us if the cap goes through. Thank you for sharing
I think I'm gong to try it, thanks for the comment!
kid in the candy store LOL
Lol
Because It says "Made in USA" not "Assembled in USA" AND says "of global components" That means they were made here from foreign steel except for the drill bits of course. Most likely the case wasn't made in the USA either as most blow molded cases aren't. They are as hard to make as a milk jug but it's cheaper because they don't make the volume needed to keep the machinery busy enough.
Thanks for the input!
The Snap-on TLLF72 1/4" flex head is tested to 80 ft lbs and the TLL72 (solid) is rated for 90 ft lbs. My Snap-on rep tested it to 100 ft lbs and Eric's Snap-on tour video his rep also tested it to 100 ft lbs.
Awesome, I appreciate the input!
Global components. Parts made around the world. But, built here.
Thanks for the input!
Global components means the materials are came from other countries