Experience the Power: Kobalt Table Saw Review - 10 inch

Поделиться
HTML-код
  • Опубликовано: 28 янв 2025

Комментарии • 15

  • @normaneckhardt9673
    @normaneckhardt9673 10 месяцев назад +8

    I have the same saw. For the exhaust I used a piece of 2" PVC pipe and attached a 45 degree PVC and angled it down. Then used an old pillow case for the dust bag attaching it with a zip tie. Works like a charm. Didn't cost me anything.

  • @katievanderford
    @katievanderford 9 месяцев назад +5

    After struggling to figure out the storage of guards and such on the sides, I found this video only to find you had a similar issue. Some more struggling and head scratching ensued. Alas, the miter gauge slides horizontal behind the other stuff in a slot, top faces the motor. The gauge cannot be locked at 90° to insert, but has to be at 90° to push in all the way.

    • @oftenwrongparadigm
      @oftenwrongparadigm  9 месяцев назад +1

      It's like once you see it, you wonder how you didn't see it to begin with... Thank you!

  • @roberttopper2946
    @roberttopper2946 9 месяцев назад +5

    Just bought this saw last week. Assembly of the legs a little tricky as the instructions are a little hard to make out. But no big deal. It is easy to fold up and move, I have to work out of a yard shed and just move it outside.
    The power button has to be held for a second to stay on.
    I do stuff that requires shallow cuts or bevel cuts. The plastic plate around the blade isn't very ridged and a little warped which make making those type of cuts hard to make consistent. Need to solve that problem, going to try to make a new one from aluminum plate or acrilic.

    • @oftenwrongparadigm
      @oftenwrongparadigm  7 месяцев назад

      I haven't looked yet, I don't need it yet, but I'm going to want a dado blade for some work I need to do. I'll need to find or make one too. Good luck!

  • @justin_agents
    @justin_agents Месяц назад +1

    If you haven’t figured it out yet. flip the subfence so it is nearest the table versus facing the latch. It will not interfere with opening/closing/ transport.

    • @oftenwrongparadigm
      @oftenwrongparadigm  Месяц назад

      Finally cleaned out the garage a bit and tested it out. It works! You rock!

  • @MichaelMcMullen-m8o
    @MichaelMcMullen-m8o 5 месяцев назад +2

    Great video dude, Thanks im buying one of these on sale for $229

    • @oftenwrongparadigm
      @oftenwrongparadigm  5 месяцев назад

      Whoa, $229? That's a great price for a saw like this. Enjoy!

  • @Happy_Time_Harry
    @Happy_Time_Harry 5 месяцев назад +1

    Great video to show off the features, but it would have been more helpful to show the assembly.

    • @oftenwrongparadigm
      @oftenwrongparadigm  5 месяцев назад

      Glad to hear you found it helpful, even without the assembly. I'll remember this for the next one. Thanks!

  • @ELCEV
    @ELCEV 8 месяцев назад +3

    Purchased yesterday, almost ready to return before even trying the saw.
    The leg stand instructions are some of the worst I have ever seen, and the leg stand seems to be not correctly made, about 1/2" off.
    I may be able to bend it for a better fit, if not it is out of here.

    • @oftenwrongparadigm
      @oftenwrongparadigm  7 месяцев назад +1

      Sorry to hear you didn't have an easy time with it. If there's issues with the parts, for sure take it back, try another one. Hopefully there aren't issues with the replacement. Good luck!

    • @Happy_Time_Harry
      @Happy_Time_Harry 5 месяцев назад

      The instructions are about the worst!!