Renault ABS Plate Shield Sensor Repair X8R | Megane Scenic Laguna Espace Grand Scenic

Поделиться
HTML-код
  • Опубликовано: 15 июн 2021
  • Link to purchase item (both sizes): x8r.co.uk/renault/abs-sensor-...
    Symptoms of the fault
    ABS light on dashboard, rusted or disintegrated ABS plate, ABS sensor hanging loose. Sometimes the plate is rusted away to the point where it is completely missing.
    The problem
    The ABS plates that sit over the wheel hub corrode and disintegrate over time, thus reducing the connectivity to the ABS sensor and generating an ABS fault code. These plates are not available to buy separately as they are built into the rear axle and Renault garages will charge over £1000 for a new axle plus labour. Even scrap yards are not willing to sell the plates separately as they can make more money selling the complete axles.
    Vehicles affected
    Centre diameter 40mm:
    Renault Megane II (2002-2009) (Convertible, Estate, Hatch)
    Renault Scenic II (2002-2009) (not Grand Scenic)
    Centre diameter 45mm:
    Renault Espace IV (2001-2009)
    Renault Laguna II (2002-2009)
    Renault Grand Scenic II (2002-2009)
    Renault Megane III (2007-2018)
    Renault Scenic III (2007-2018)
    Renault Grand Scenic III (2007-2018)
    Renault Laguna III (2007-2018)
    Associated part numbers
    Rear axle:
    430008639R (45mm)
    7701477075
    7701477073 (40mm)
    Our solution
    Our ABS plates are a much more cost-effective solution to this common and simple issue. We have designed & created our own plates out of marine grade stainless steel to prevent any corrosion like the original unit. They also have two indents for spot welds, this is because the knuckle itself may have surface corrosion, affecting a secure fit for the new ABS plate, if this is the case then you can spot weld it into place so the ABS sensor does not become lose.
    You will receive
    1 or 2 x ABS Plate made of marine grade stainless steel
  • Авто/МотоАвто/Мото

Комментарии • 18

  • @ivancrowe6341
    @ivancrowe6341 2 года назад

    Hi there. I have a 2010 Renault Espace grande Mark IV 2.0 DCi and need two rear ABS plates. Although your Part No. X8R0208 is advertised for Espace IV, when I check suitability it comes up 'not suitable'! Can you help me find a satisfactory replacement? Thanks.

  • @depthofshine
    @depthofshine Год назад

    Tried theses on Twingo RS but sensor didn't fit all the way on and flashing up ABS fault, not sure how far on the axle they should be TBF.

  • @toryglen
    @toryglen 2 года назад

    Would this part be a good replacement for a Renault Modus 2005 rear wheel?
    If so what plate size, 40mm or 45mm?

    • @X8RLtdUK
      @X8RLtdUK  2 года назад

      Hi there,
      Please send us an email with your reg or chassis number to sales@x8r.co.uk

  • @Iffy
    @Iffy 3 года назад

    Please can you you provide a product code for the abs plate shield sensor, as I'm unable to find it on the site, for a 07 Renault megane Dynamique Cabriolet 1.5 dci, thank you!

    • @X8RLtdUK
      @X8RLtdUK  2 года назад

      x8r.co.uk/renault/abs-sensor-repair.html

  • @redhamasri
    @redhamasri 2 года назад

    Hi there!
    I have a 2010 Laguna coupé GT 4WS and I woundr what would be the plate size for this car and is it possible to be delivered to other countries?
    And if it can't be shipped to other countries will I be able to collect it from a certain locations in England?
    Thanks in advance

    • @X8RLtdUK
      @X8RLtdUK  2 года назад

      Hi there, please email us on sales@x8r.co.uk and we will get back to you. - Georgina, X8R Ltd

  • @iiloveblueheartii6501
    @iiloveblueheartii6501 2 года назад

    What would I need for a Renault megane dynamique 1.6 petrol 2006.....reg sh06bwe

    • @X8RLtdUK
      @X8RLtdUK  2 года назад

      Hi there, according to our system you have a Mk2 which should be the 40mm which can be found here:
      x8r.co.uk/renault-abs-sensor-holder-mount-bracket-plate-40mm.html
      Best thing to do would be the measure the diameter of the spindle it sits on. - Georgina, X8R Ltd

  • @davidwaters5348
    @davidwaters5348 2 года назад

    Hi do u have to use a welder

    • @X8RLtdUK
      @X8RLtdUK  2 года назад

      Hi there, it all depends on the severity of the rust. We have incorporated spot-weld cut-outs into our design in case the spindle the plate fits onto has been heavily corroded. In the example on the video we did not need to. - Georgina, X8R Ltd

  • @Andr3i5488
    @Andr3i5488 3 года назад

    hi
    I'm interested in 2 pieces with a diameter of 40mm.
    For a 2007 Scenic Renault 2 1.5dci.
    How can I make me buy 2 pieces?
    Please kindly help me.
    Thank you very much

    • @X8RLtdUK
      @X8RLtdUK  3 года назад +1

      Hi there Andrei, we are awaiting a delivery and then they will be listed on our website www.x8r.co.uk. - Georgina, X8R Ltd

    • @X8RLtdUK
      @X8RLtdUK  2 года назад

      x8r.co.uk/boot-button-replacement-repair-renault-megane-scenic.html

  • @redhamasri
    @redhamasri 2 года назад

    Forget to add that it's a 3.5 V6 front wheel.

  • @janismuizulis8762
    @janismuizulis8762 Год назад +1

    50 pounds for round sheet metal.Yeah!!!

    • @X8RLtdUK
      @X8RLtdUK  Год назад

      Or going to Renault and them quoting over £1000 as they do not sell this part individually :) Our part will last the lifetime of the vehicle as it is made of marine grade stainless steel, ours also has spot weld holes in unlike any other ABS plate on the market. - Georgina, X8R Ltd