That transmission of yours is so simple and small yet so effective because it has neutral steering. I will use it in my next project. Your tutorial is 2x better than qarsan's. Thanks!
You can use a copycat beam instead of a full block for the turret shaft, the tinier hitbox gives you more space at the base. (A create shaft might work, but will have lower blast resistance)
@@yolothestronz2267 no I mean like how would you implement this The cannons need a rotational input to work how would you get the data from the gyro to the cannon input?
I plan on doing a video on better turret internals which will have a 3x3 drop-in autoloader that uses the big mount, but in the meantime I can give a basic explanation The main differences are that you need to build the cannon in line with the mount (2 blocks above the base block), and you also power the pitch from the side of the base of the mount, not the side of the cannon itself You can assemble it and fire it by inputing redstone into either side. Powering the side with a hammer assembles the cannon, and powering the side with a red dot and a line fires the cannon Loading and autoloading the larger mount is no different to the compact mount
Hey, i noticed your builds on the page of "Trackwork", and i was interested if you could maybe teach me, and maybe other people on how to build a good looking car, or that jeep from the desc of the mod :)
Once I have some free time, I have plans to hopefully make many more tutorials around VS and Trackwork, including good looking and compact cars, so stay tuned :)
It's weird, I couldn't hardpower the gearbox with a lever to reverse; not the end of the world; no the end of the world comes when having finally built a successful transmission (+ finally including the steps, kneel clicking the helm to assemble, and then break the helm); to then put it on it's highest RPM and see.... fuck it's gone, aaah no come back!!* 3 chunks across and up a big hill, thank goodness for the deep river on the other side; and remembering of the gravity gun! * glad I wasn't in superflat (no structures). Uh well, that's gone!! :D Although it could be interesting to build a tank with a waystone inside a: to see if you can tp to a moving waystone, or if not moving can move between waystone tanks whilst stationary, but always to their new location
please respond. i am not using the tank tussle modpack but most of the mods, exept tally ho and tournament, how do i put a schematic on a shit, it wownt let me. ive tried hard i t just snaps to normal block grid and doesent place on the physics affected block
I'm not sure what mods are responsible for this functionality, but I'd highly recommend using the modpack. If you want to set up tanks without the modpack, you'll want to place the schematic somewhere in the air, make sure it isn't touching any part of the ground or other structures, and then use the ship helm after placing your schematic to assemble it.
Clockwork is the mod that makes VS and Create work together. Any version Clockwork is compatible with works fine. I'm playing on 1.20.1, but 1.18.2 works well too
when i print the schematic on the shippified block it doesn’t act like yours but just turns to normal block and break everything. can you give me some advice
You might be accidentally placing the schematic on the ground below the shipified block Maybe use a phys gun to pull the block into the air, and then try to print the schematic up high?
so i have some problems with getting the clockwork tabs to open, whenever i try to open them minecraft crashes. should i use fabric instead of forge? i have never had this problem before
your tank look good but landmind can make tis tank cant move with controller cuz all the contol is in below so yea i dont think tis thing can survived the tnt land mine also hijacker can hijack the tank cuz below is expose
This tank is not for combined arms warfare or realistic battles. It's main purpose is freeplay, where the map has no gimmicks and everyone is inside their respective tank at all times. For a realistic or combined arms tank, the links should definitely be concealed
You can, just make sure that keybinds are setup right in the config menu. You won't be able to use the analog redstone signal without a proper controller or joystick tho.
The mods are in the discord server in the description. The main mods are create, valkyrien skies 2, clockwork, trackwork, create big cannons, create connected, tweaked controllers, ender transmission, eureka ship helms and steel armor blocks
The only way to get all the mods used here is through the tank tussle modpack, available in the discord in the description. Quite a few of the mods are in-house and aren't available anywhere else.
Create, valkyrien skies 2, clockwork, trackwork, create big cannons, steel armour blocks, copycats+, eureka ship helms, ender transmission, create connected, diesel generators, cbc modern warfare, tournament This is not the full mod list, just the essentials
@@milanjocic5093 i believe it can be found on github, if not it is in the tank tussle modpack. if anything, i would strongly recommend finding another launcher, as tlauncher is not secure.
The scale of the tank is just from the armour thickness. Using the exact hull internals and some tweaked turret internals you can make tanks as small as 5 blocks wide and 8 blocks long
Finally a tutorial video that not only tells you how to properly make a working tank but also explains what each thing does, thanks!
Finally, I can get hired as a tank engineer
Thank the heavens someone finally made a proper (non-slop) tutorial.
That transmission of yours is so simple and small yet so effective because it has neutral steering. I will use it in my next project. Your tutorial is 2x better than qarsan's. Thanks!
I’m pretty sure it’s skepsis’s transmission or very similar
@@crazyjack746first time I saw this transmission was in Skepsi's post, but I can't confirm if he was the original designer or not
I 100% agree, this doesn’t gloss over parts that are hard for newbies
Thanks for the great tips you earned yourself a sub
glad to see more people making tutorials for tank tussle things
If you could, it would be nice if you made tutorials on how to make ships!
You can use a copycat beam instead of a full block for the turret shaft, the tinier hitbox gives you more space at the base. (A create shaft might work, but will have lower blast resistance)
Cooked heavy on the Thumbnail
little addition that you can add: put a clockwork gyro in the turret to make a stabilizer
Very good idea but idk how will it work out.good for modern tanks like abrams
Is there a video on how to do this?
Yeah but the turret of the tank would come out wide if you use an autoloader
@@Everything_I_Like. It's simple, put a gyroscope on a rotational source but be sure to have enough rpm because at low speed it won't work
@@yolothestronz2267 no I mean like how would you implement this
The cannons need a rotational input to work how would you get the data from the gyro to the cannon input?
That tutorial better than qarzies tbh good job
Tutorial is so good that i didnt even realize it was 45 minutes
Can you do a tutorial for the larger cannon mount?
I plan on doing a video on better turret internals which will have a 3x3 drop-in autoloader that uses the big mount, but in the meantime I can give a basic explanation
The main differences are that you need to build the cannon in line with the mount (2 blocks above the base block), and you also power the pitch from the side of the base of the mount, not the side of the cannon itself
You can assemble it and fire it by inputing redstone into either side. Powering the side with a hammer assembles the cannon, and powering the side with a red dot and a line fires the cannon
Loading and autoloading the larger mount is no different to the compact mount
So how can you make smaller tanks? Will there be a tutorial video for this?
There will be a tiny tank tutorial in the future, yes. I'm planning to do a full series on different techniques and more advanced things too.
@@the_real_fiz2zy thank you for replying
same thing, just pull out your hair trying to making everything more compact
@@ItsAsteri_ real
It's alot easier tho when you only have 1 cannon to deal with
@the_real_fiz2zy your are the best
since most people woudn't want to check the description:
0:00 Introduction
0:09 Transmission
4:35 Diesel Engine
6:58 Turret Traverse
13:50 Turret Internals
21:31 Bodywork
31:25 Detailing
36:39 Saving Schematics
38:27 Assembly
44:43 Outro
all we need is a part 2
for combat and driving
Hey, i noticed your builds on the page of "Trackwork", and i was interested if you could maybe teach me, and maybe other people on how to build a good looking car, or that jeep from the desc of the mod :)
Once I have some free time, I have plans to hopefully make many more tutorials around VS and Trackwork, including good looking and compact cars, so stay tuned :)
amazing video, well done
41:30 ok, so tanks south, planes north (copycat button goes on south wall when placed on non-full blocks like the APDS shot)
When i place the schematic one of the sides turn invisble any fixes?
bro thank you so much you show me to fix my tank moving for that i give you a sub
It's weird, I couldn't hardpower the gearbox with a lever to reverse; not the end of the world; no the end of the world comes when having finally built a successful transmission (+ finally including the steps, kneel clicking the helm to assemble, and then break the helm); to then put it on it's highest RPM and see.... fuck it's gone, aaah no come back!!* 3 chunks across and up a big hill, thank goodness for the deep river on the other side; and remembering of the gravity gun!
* glad I wasn't in superflat (no structures). Uh well, that's gone!! :D Although it could be interesting to build a tank with a waystone inside a: to see if you can tp to a moving waystone, or if not moving can move between waystone tanks whilst stationary, but always to their new location
heres a fact:
you can also try using other mods if you don't want to use the most common weaponry/engines
aslong as they are still create/VS2/VS compatible
Where to get find the compact cannon mount?
And where do i find the 1.20.1 version?
please respond. i am not using the tank tussle modpack but most of the mods, exept tally ho and tournament, how do i put a schematic on a shit, it wownt let me. ive tried hard i t just snaps to normal block grid and doesent place on the physics affected block
I'm not sure what mods are responsible for this functionality, but I'd highly recommend using the modpack.
If you want to set up tanks without the modpack, you'll want to place the schematic somewhere in the air, make sure it isn't touching any part of the ground or other structures, and then use the ship helm after placing your schematic to assemble it.
Compact tank tutorial?
Soon :)
What mods does Tank Tussle use?
Remember me when you hit 10 Million subs.
oh mein got
On what version do you Play that creative and Valkyrien Skies work together?
Clockwork is the mod that makes VS and Create work together. Any version Clockwork is compatible with works fine. I'm playing on 1.20.1, but 1.18.2 works well too
@@the_real_fiz2zy It still doesnt work
@@nicobachtrog6823 what version, what mods, and what loader are you using?
@@the_real_fiz2zy Im using Forge and im Playing 1.20.1 and using Create 51f the newest clocwork and the newest Valkyrien Skies
@@the_real_fiz2zy im playing on 1.20.1 Forge its Create and Valkyrien Skies that dont work together
when i print the schematic on the shippified block it doesn’t act like yours but just turns to normal block and break everything. can you give me some advice
You might be accidentally placing the schematic on the ground below the shipified block
Maybe use a phys gun to pull the block into the air, and then try to print the schematic up high?
@@the_real_fiz2zy thanks, i'll try again
so i have some problems with getting the clockwork tabs to open, whenever i try to open them minecraft crashes. should i use fabric instead of forge? i have never had this problem before
Make sure to install architectury API
@@the_real_fiz2zy thanks! that fixed the problem
noice
10:36 For some reason the link wont hard power through the encased cog chain drive for me
Make sure to use cogs and then place casing over the cogs. Encased cog chain drives can't be hard powered. Only cogs encased with casing can.
@@the_real_fiz2zy thanks I’ll try that
are the two cannons stacked into eachother neccessary?
It isn't necessary, but it will give you 2x penetration compared to a single cannon
@@the_real_fiz2zy oh alright, thanks!
Make a video, please, a manual for the operation of helicopters or airplanes
I'm not very experienced in those areas, sorry
I could attempt to learn more about these areas though
What mod is the compact cannon mount from bc i dont see it in create big cannond
It's from Create Big Cannons: Modern Warfare, an in-dev mod that is only available through the tank tussle modpack
@@the_real_fiz2zytysm
your tank look good but landmind can make tis tank cant move with controller cuz all the contol is in below so yea i dont think tis thing can survived the tnt land mine also hijacker can hijack the tank cuz below is expose
This tank is not for combined arms warfare or realistic battles. It's main purpose is freeplay, where the map has no gimmicks and everyone is inside their respective tank at all times. For a realistic or combined arms tank, the links should definitely be concealed
what version is it?
1.20.1
What is the version?
1.20.1
can i use keyboard for tweaked controller ?
You can, just make sure that keybinds are setup right in the config menu. You won't be able to use the analog redstone signal without a proper controller or joystick tho.
What is the addon???
The mods are in the discord server in the description. The main mods are create, valkyrien skies 2, clockwork, trackwork, create big cannons, create connected, tweaked controllers, ender transmission, eureka ship helms and steel armor blocks
3:16
Is there a mod list somewhere?
The only way to get all the mods used here is through the tank tussle modpack, available in the discord in the description. Quite a few of the mods are in-house and aren't available anywhere else.
What mod are you using for armour?
And what mod are you using for the compact cannon mount?
@@eeshadow9785 cbc modern warfare mod and Combatgear
@@user-iq2gf6sk9u Steel armor blocks as well
can someone reply to this comment with the mod list? i dont know how to use the modpack
Create, valkyrien skies 2, clockwork, trackwork, create big cannons, steel armour blocks, copycats+, eureka ship helms, ender transmission, create connected, diesel generators, cbc modern warfare, tournament
This is not the full mod list, just the essentials
@@the_real_fiz2zy isnt cbc modern warfare still wip? i cant find it in the tlauncher mods search bar
@@milanjocic5093 i believe it can be found on github, if not it is in the tank tussle modpack. if anything, i would strongly recommend finding another launcher, as tlauncher is not secure.
Хоть не знаю англиский но сматрю субтитри
ты и русский не знаешь, ребёнок.
Why it so big ☹️☹️☹️
The scale of the tank is just from the armour thickness. Using the exact hull internals and some tweaked turret internals you can make tanks as small as 5 blocks wide and 8 blocks long
I plan on making a tutorial for smaller scale tanks in the future