12v 100A Super Capacitor Battery for High Current DC Motor - Amazing Idea
HTML-код
- Опубликовано: 3 окт 2024
- In this video, I am going to use a few super capacitors of rating 2.7v 500f for making a powerful high current supercapacitor or ultra capacitor battery pack. Links for the super capacitors have been provided below along with their balancing charger board link. All the capacitors will be connected in Series to reach a max of upto 12 volts DC so that I can use it in many 12V applications and test it on various high current DC Motors like Starter Motors upto 100 amperes.
Ultra Capacitor - bit.ly/2XCpYzv
Super Capacitor Board - bit.ly/2JxKBWV
RELATED VIDEOS :-
1.How to make 220v AC from a 12v Car Alternator at Low RPM
• 220v to 300v AC from 1...
2.How to make a 5V Aluminium Battery at home DIY
• Video
3.Simplest Automatic ON OFF room emergency Led light
• Simplest Automatic ON ...
4.How to do connections for universal motor
• Universal Motor from a...
5.110v AC from a 12v Car Alternator at Low RPM
• 110v AC from a 12v Car...
6.Alternator Connections Explanation and Working tutorial video
• Alternator Connections...
7.3 Awesome Life Hacks
• 3 Awesome Life Hacks
8.DC to AC Converter with Dead Induction Motor
• DC to AC Converter ( I...
9.How to make an Electric Bike from old petrol Bike
• SIMPLEST ebike using 3...
10.12 v to 220 v DC to AC Converter ( Inverter 1 )
• 12v to 220v | DC to AC...
11.How to Make a 400V ac generator
• Free Energy 2018 - 220...
12.Mini free generator that run a Drill
• Motor to Generator Con...
13.How to make a mobile phone screen projector
• An HD Smart Phone Proj...
14.Homemade Generator Idea with Motor 2018
• Homemade Generator Ide...
15.How do transformer winding
• Detailed Step by Step ...
16.How to Make DC Transformer DIY
• How to Make DC Transfo...
17.How to make an electric bicycle at home 40 km per hour
• How to Make an Electri...
18.Electric Rickshaw Motor Generator 220v
• Free Energy is Hoax | ...
19.Run 220v ac power tools at just 12v dc
• How to operate 220 v P...
20.High Current DC Step Down Converter DIY
• How to Step Down DC ( ...
21.DC to DC Boost Converter DIY
• DC to DC Boost Convert...
22.How to make a powerful welding machine with capacitor bank
• New Invention ! Make 1...
23.Simplest 12v to 220v 500W power inverter without ic
• Simplest 12V DC to 220...
24.3 volts DC Motor at 5000 volts high speed experiment
• DC Motor Life Hacks ||...
25.12v dc to 220v ac Project Inverter
• Simple Inverter 12v DC...
26.Awesome Idea for Drill its New DIY 2018
• Awesome Idea for Drill...
27.Run stepper motor continuously without a driver circuit
• Wow !! Run Stepper Mot...
28.12v 100w dc motor speed controller
• Homemade Powerful 12V ...
29.220v ac Motor to Generator conversion Experiment
• 220v Generator from 75...
30.12 Volts 64 Amps DC Motor Generator 750 Watts
• 12 Volts 64 Amps DC Mo...
31.Old Mixer Motor as a 100W Generator a New Idea to Self Excite
• Old Mixer Motor as a 1...
32.DC to AC simple buzzer inverter
• Make DC to AC Converte...
33.How to make a 18650 battery tab spot welder
• How to Make Battery Sp...
34.How to step up output voltage of wind turbine generators
• BOOST the Output Volta...
35.Run 1500W DC Motor with just 3V cell
• Run 1500W DC Motor wit...
#12v #supercapacitor #battery#motor #highcurrent #amazingidea - Наука
*Join this channel to get access to perks:*
ruclips.net/channel/UCWFbPzBb7dCyCWuBA-DBrMAjoin
*Mr.Electron Patreon's Page* - www.patreon.com/mrelectron
*Hindi Channel* - www.youtube.com/@Mr.ElectronHindi
*Alternator Channel* - www.youtube.com/@mrelectron_alternator
*Watsapp Channel* - whatsapp.com/channel/0029VaQmmRaFCCoWOf7huh3G
*Ultra Capacitor* - bit.ly/2XCpYzv
*Super Capacitor Board* - bit.ly/2JxKBWV
PLEASE REPLY
ARE YOU INDIAN?
Could this be a replacement for the bike's battery?Does Chance have this to explode? Please reply
Of Amerika? ??
@@arafakk u can but storage capacity of power is low
what music 0:00?
Sorry for the criticism, but your soldering technique need some serious work. You are making dry joints all the way, that will come loose with the least bit of pressure or vibration.. First solder on the copper track with a little bit fresh solder so that the copper is "tinned". If you have some flux available it is a good idea to apply some on the bare copper track, but not necessary if your solder wire have a resin core. Do the same with the component, in this case capacitor's pin. Just "tin" it withe a thin layer of solder. Now, fit the capacitor and apply the soldering iron against both the pin and copper track, and at the same time apply a bit of solder. You will find that your solder will smoothly flow into a perfect connection. The idea is that both the copper track and component pin must be just hot enough to melt the little bit of solder on them by themselves, and therefore the solder "bind" to the copper. When you then install the component and re-heat both at the same time,the solder flow and fill the gap as a single "entity", and you just apply a little bit extra solder to fill it up nicely. Now that you have taken some time to calm down, just try it and if you want to, thank me, but advice is free after 40+ years experience.. :-)
Agreed 👍
Totally agree ... component placement isn't very good either.
I agree I chring when he dry soldered
Totally agree. Looks like the autor is service man for old soviet TVs.
Here nothing is professional 😂 May be this is done in purpose.
This lad is not what you would call a soldering expert, but the super caps look genuine.
When soldering, heat the connection first and apply solder to the JOINT, not the iron. It's especially important to get the foil trace on the board hot enough so that solder will flow into the through-hole.
Это Все хорошо . Такое ощущение что первый раз паяльник в руках держал . И еще не с той стороны кондеры запаял на баланс. плате . За обзор 5 . а за пайку 2. СОВЕРШЕНСТВУЙТЕ СВОИ НАВЫКИ
Плакал уровень пайки - вместе с ним и я
Нет слов
Руки из жопы у него,леща прописать.
😂😂😂😂😂😂😂i did too
you should solder by first heating the two parts with the solder gun, and once hot apply the tin solder. Never directly in the tip and then to the parts since it will lead to weak soldered joints.
Apparently he has habits from a transformer soldering iron. Of course, a tip soldering iron requires a different soldering procedure, but there are tip soldering irons that can immediately increase power, so they behave like transformer soldering irons.
Hi baby
Until you get the component too hot and the lead moves with the melted plastic around it
@@80milekyle70 Right. When I started soldering "the correct way" I ruined a number of components. Made them too hot.
Always use the correct temp iron for what your working on. And or use heat sink to prevent damaging your components
One little hint: to get a good solder joint, you should first heat up the pad and the pin of the part and apply the solder while still holding the solderingiron onto it. Do that until the pad is covered in solder. To check if the joint is ok, just look at it closely. If the solder is reflecting and even, it's good. If it is uneven and matt, add a little more flux and reheat it.
I hope you appreciate my expert advice.
My level of education is: electronic engineer for industrial engineering
Un grazie ,sincero da Giuseppe Tambuzzo di Milano Lombardia Italia
Под затяжку лепестковых наконечников проводов ставят винты, болты ,с плоской головкой,а потай это просто ЖЕСТЬ.
If you have capacitors in series to meet the voltage, you have significantly lost their capacity. This way you only have 83F (17V) instead of 3000F (2.8V). Converters from 3V to 12V are relatively low-loss and would significantly increase the time of motor rotation or lighting. It is possible that all of this capacitor board allows (no data is provided around it).
Converter? What kind of converter?
@@josephbadulak9146 DC-DC (step up)
Energy storage in Joules is 1/2 CV², so it ends up the same whether in series or parallel, assuming they're all equal. The voltage term being squared makes up for the lower capacitance in a series connection.
@@dubmob151 Of course, the Joule density, or power is the same regardless of the connection, but it is a condition of operating voltage, power retrieved and the resulting time ...
@@DL-kc8fc higher currents with the parallel connection and dc conversion efficiency may result in higher losses though.
Amigo, boa Noite!
Tenho duas observações para fazer:
1 - Não se deve colocar a solda na ponta do ferro e depois colocar no circuito, pois a solda queima quando esta na ponta do ferro e perde a sua liga, você deve aquecer as peças a serem soldadas e colocar a solda nelas e não na ponta do ferro de solda.
2 - Você soldou os capacitores pelo lado errado, não se coloca componentes por cima do outro, principalmente destes mosfets que aquecem.
Fora isso a ideia é boa.
Friend good night!
I have two observations to make:
1 - You should not put the solder on the tip of the iron and then put it in the circuit, because the solder burns when it is on the tip of the iron and loses its alloy, you must heat the parts to be welded and place the solder on them and not on the soldering iron tip.
2 - You soldered the capacitors on the wrong side, there are no components placed on top of each other, especially these mosfets that heat up.
Other than that the idea is good.
Muita burrice em um video só! deu agonia de ver ele soldando!
salve Mr. Electron, se imparassi a saldare bene sarebbe meglio! Ci sono molti tutor su RUclips che spiegano come fare ottime saldature a stagno comunque complimenti per la realizzazione! Considerata la tua esperienza ha iniziato egregiamente!
тот момент когда не понимаешь, зачем смотрел 10 минут как он к батарее из суперконденсаторов подключал один за другим эл.движки...
your soldering skils make me cry 🥲
Good jon, but 1. Compacitors are up side down 2. There are cold solders/joints. You should use flux.
Three years ago I installed a Maxwell Supper capacitor pack six capacitors and they work great. I also use a pack on my lawn mower, no more batteries wasted.
How long does the pack last if using continually. thanks.
@@gilldanier4129 5 seconds
i am Vietnamese
Tôi rất thích video của bạn 👍
I like video your
Tom My Taking haha. Tôi cũng vậy
Me too
Unusual soldering putting solder on the iron & taking it to the joint to be soldered. Since I was a Kid mid 80s I have always applied the iron to the contacks to be soldered & apply the solder for much tidier joints.
Hope you have improved your soldering skills by now .
THAT SOLDERING 😳
Sensacional!!! Você é um experto em eletrônica, mas cuidado com o " gato" . Parabéns!!!
Auch so ein Künstler am Lötkolben...
And the question is..
How long it can work with high current ??
Руки оторвать за такую пайку!
Отличная идея, просто здорово.
Do you come up with such cool things but can't solder?
Soldering technique leaves a lot more practice
Great Video Bro, please also make one voiced video on difference between connecting caps in series and parallel, also please explain why it cuts capacity in series 👍🏻👍🏻🙏🏻🙏🏻
100A ha-ha-ha! You are 10 years old, you have found hot water, happy and you have to post this discovery on RUclips! Learn more, it's a start, I wish you success!
Need to learn how to solder... "buddy"!
Totally noob :P
Exactly! :-)
practice make perfect .........learn how to solder perfectly so next u don't have comment like this
How can one learn if they never do. Even if it is sloppy the first few times you are putting practice into the skill.
Soldiering badly is one of the fastest ways to learn to do it right.
I agree
Your soldering iron feasts!
So you ended up using capacitor as a battery, good job in making the people aware... Those who were not aware.
But I'm more keen to know the efficiency, I mean generally Caps are in Farad but battery is in Amp hours... So looking to know about Amp-hours as you need to compare apple to Apple
Mr Electron:- Total fan of you, so much appealing, so much learning, excellent of you to sharing your knowledge continued in UTube, we benefitted a lot on so many thing's, pls keep it up with new Idea's, 👍🏿
tutorial video with speechless performer !! Is this intnded for deaf viewers??
already improved upon that
Just my thoughts here. Don't be afraid to really heat the joint/solder/copper leads up. Give it ALL time to reach the melting point and WAIT for the solder to actually flow away from the initial clump to a nice shiny lake. Then, pull the soldering iron away. You really have to work at it before you do any damage. Waiting is hard to do, but it gives the best results. Nice video.
12v100A kapasitor amazing.....
Very good
adicione a solda junto com o ferro quente, a sua maneira de soldar não é muito boa mas o projeto é legal !
شكرا على المعلومه
amazing idea i am impresed by this project
WoW that is amazing
Can it be used to replace rechargeable batteries?
He's showing that hot glue soldering method purposefully to generate comments. Success! 😉
Saludos, muy bueno el proyecto, pero he sabido siempre que los condensadores se descargan muy rápido, creo son baterías camuflado!!??
No, they are supercapacitors , they can store a lkt of energy
Notice how he doesn’t let any thing run longer than a few seconds. That’s because capacitors hold a lot of power and are designed to deliver that power very quickly but that quick delivery in this small size drains extremely quick.
Just pair this with a classic battery and you're set.
Very informative video, i would like to call you Mr Motron instead coz of your awesome collection of motors
sure thanks !!!!!!!! :D
Agree, his hobby is all about motor and generator
Very well done my friend..
Esto quiere decir que si uno los capacitores en paralelo tengo más amperes en un circuito electrónico?
Вечный запас энергии👍😂😂😂😂😂😂
Хм, есть сборки из 3000 фарад конденсаторов, заменяют аккумулятор в машине.
Это что за пайка такая? Автор хоть раз пыльник в руках до этого держал?
С языка снял🤣
I totally agree with you 👍
У меня глаз дергался, когда пайку смотрел. Как наср*но.
Так ещё и припаял со стороны смд монтажа🤣
回路としては問題ないけどキャパシタは部品面ではなく裏面から取り付けるのが正解だと思います
Well done my friend 👉👍
70зхх000эхэээээ это папа
C chouette des montages comme çà. Si ya pas de composants électroniques çà va. Si ya des diodes et transistors et de truc kom çà, ça devient compliqué.
The Capacitors should have been fitted on the other side of the board and also you have a louse soldering method. This way you make a dry or loose soldering which make the circuit an inefficient in performance. You have to be perfect in public display, otherwise you may get lot of trolls and you also really have to improve your soldering skills.
Nice presentation my friend....
You should buy a good Multimeter now😀
That is a good multimeter. Better than I have. What's wrong with that?
I'll send him a new one.
Nice experimental project good job
With this can you operate inverters 200 watts
yes but not for long
I use supercaps for my 24V solar system, 2000W is no problem.
Wel done....can v run the home equpments.....water pump......refrigerator..fans..led lights
7:45 cutie, ppl who love cats are generally smarter and more independent
Correlation does not equal causation
Thanks again for sharing knowledge
its beautifull
I love Capacitors they are fun and helpful mixing transformer mofset and resistors. And diodes ...I GOT THE POWER!!!
Не с той стороны конденсаторы напоял!)
Brave man no fear for shockss 💢💢💢
How much minute can run 12volt DC motor?
41
Not long
Con ultra capacitores hemos movido una Kangoo 5 cuadras
I like this. You had fun, and i can tell
Bro why the capacitor s not discharging how it possible
It is, cant u see the voltage of the capacitor decreases When it uses to power motor, lamp, etc
Can we replacing batery on mobile with super capacitor?
เป็นการให้บริการ ในด้านการศึกษาทั่วไปได้ดีเป็นพิเศษ ของ RUclips
You put the capacitors on the wrong side of the PCB.
But it's working
Nice
do it 36v 100a but small pack for electric scooter like segway es2 and will buy it
Excellent brother I want to know how to charge capacitor
I've always wondered what those metal plates are atop your multimeter
Для щупов
good video
How to use soldering wire u no
Good ideas with super capacitors
Kepesitar kaha milega
@@radheshayamregar9630
China me milega, AliExpress se order kijiye
Que capacitores são esses?
Lo felicito bien feliz año nuevo.
Gmn cara bikin nya
Motor DC , bila di putar menghasilkan arus dc, apakah bisa di gunakan untuk welding , ngelas,
You soldered those capacitors on the wrong side of the board...
Najlepszy przykład jak NIE NALEŻY lutować.
You put the capacitor up side down
Can we make Honda Activa 125cc Battery for self start
Конденсаторы запаяны не той стороной!
А какая тут разница? Любой можно, напругу дадут.
vevry good video brother
thanks !!!!!!
Que desesperacion ver como solda... 1:00
Godjob sir, how many days capacitor lowbat?
That is not how to solder!! Solder and iron need to come together at the joint
Descarrega muito rápido!
That soldering is a bit how ya doin...
Although more flux could do better.. :) But who cares as long as it works as expected.
you just got 1 subscriber
So why cant you just drill wholes in a copper plate and do same thing ?
because he made balance charging circuit to cut off voltage when one of the cap is charge and same with others so they will not over charge and blow up
Ottimo per aiutare l'avviamento dell'auto in inverno, anche con batteria mezza scarica.
Da lasciare in parallelo alla batteria.
nicht löten können aber auf elektronikermachen
Ja so ein gemurkse beim löten habe noch nie gesehen
Es geht um das Prinzip, und nicht um die lötkünste.
The cat was thinking even I am the part of yr video me should also get credit🤣
can you start a car?
i ahve to try
No problem
nice . very important
машину попробуй завести. и научись паять наконец,