I bought an ED 5000 in the US and moved it to China in March. It rode in a checked bag and I think Delta gave it a rough ride because every roll that goes through is a new adventure. I converted the film feeder to full strips by jumping the circuit board and I also bought the 3D-printed film drums off Etsy (they required some cleanup and customization to work properly). I tore it down just like you did to clean the internals. I also added some new grease to some of the wear surfaces of the moving components. As far as scanning goes, sometimes I get a roll of 36 frames scanned perfectly, but more often I get about 15, 20, 25 frames scanned and the scanner randomly ejects the strip of film and I get salty with the machine. Another thing I just learned was set the "Focus" setting in Vuescan to "Always". Also, all of my scans show a creation date of 1/1/24. Not sure why. It's a great scanner when it behaves, I just wish it behaved more often. I guess it's showing it's age.
I've got this exact model, purchased from a camera store new-in-the-box a few years after they were discontinued. I hadn't heard of the SA-30 mod. Clever!
I love my Coolscan 8000. It is very manual for loading though, even with my more format-optimized 3d printed holders. If I hadn't switched entirely to 120 and digital I would have to give the 5000 a serious look! I'm curious what that anti-static brush is. Seems like something I should add to my setup.
I have a Coolscan 5000 and had the same issue with Digital ICE. I read that it is due to some kind of problem with CPU overclocking not playing nicely with the Nikon Scan software. There might be a better way, but I just ended up creating a custom power plan in Windows that set my maximum processor state to 80%. With that change I'm able to use Digital ICE without any errors while batch scanning with my SA-21 feeder.
@@SprocketHoles Having the exact same issue with batch scanning with the Coolscan 5000. Was it easy to get working on a VM? Could you maybe point me in the right direction on how to go about it? Could even be a video since I didn't find a good solution yet online. Thanks!
@@thor3659 I used virtual box for the VM manager and windows vista for the oOS on the VM. Once working I used the VM tools to map a folder on my host os to a drive letter on the VM so the scans transfer. I have to make sure to check the pass through for the scanner to the VM as well.
I want to see automated wet mount of a 38 frame hand wound roll on an imacon, and the device needed to facilitate. I think it could warrant up to 3 ziploc baggies =D
With the CCD sensor of the scanner, you are actually scanning the color of the film. With the CMOS sensor of the digital camera methods you later have RAW processors guessing what color it was. Yeah, it works, but I just feel that to get the best color CCD scanners are still it.
great video! i'm looking forward to the comparison to camera scanning. I hear you on the dust, for me camera scanning has alleviated nearly 100% of the dust i used to get on my flatbed (and much better quality for 120 film. 35mm is always tough, although i get great results camera scanning, curious to see your comparison
didnt know about the door, I have the V, looks like there will be more modding on it :D but as for nikon coolscan 4.0.3 will work on 7 or vista or 10 but driver signing needs to be off, that is not a problem for 7 I think but 10 will put a sign on screen
Very informative video. At 11.30 It us not neccessary to run Nikon Scan with "weird unsigned drivers" to use it on Windows 11. Just install a trial of Vuescan (it includes new drivers) and then install Nikon Scan without drivers (uncheck the driver check boxes when installing, this is the important step). Use Nikon Scan 4.03. However Vuescan is probably better and easier to use.
I bought a G4 PowerBook just to run Nikon Scan with ICE. It is 100% worth it to find a solution to run Nikon Scan. I used vuescan for years and there is no comparison between real ICE versus the dust scratch removal in vuescan.
super informative thank you i have the scanner the SA30 , and 3 different slide-ins i guess you would call them lol , it's for a professional not me so i am listing them they are all like new but thank you for the informative video
Very good video. As far as I know, the problem is not Nikon, but Digital ICE. Epson does not support Digital ICE anymore on Windows with Epson Scan 2, therefore they started providing Silverfast. And the old Epson Scan does not work, I think, on Windows 64 Bit. This is probably why scanning fails with ICE on.
Yeah, it's a great scanner. Colors are crap tho. Even when converting through NLP. I prefer the Kodak Pakon F135. I find that I don't need 20 MP scans and am happy with 6 MP. Somehow because of the way the Kodak machine handles the film, the photos have more detail than my Nikon 5000 ED,
Dirt on the mirror is an eternal problem with those Coolscans for the simple reason that the mirror faces upwards, albeit at 45 degrees. You might want to give your films a decent clean before sticking them inside the scanner or you'll be shoving more dirt on to the mirror. Minolta's 5400 scanners have the mirror mounted vertically - much less probs with dust.
I bought an ED 5000 in the US and moved it to China in March. It rode in a checked bag and I think Delta gave it a rough ride because every roll that goes through is a new adventure. I converted the film feeder to full strips by jumping the circuit board and I also bought the 3D-printed film drums off Etsy (they required some cleanup and customization to work properly). I tore it down just like you did to clean the internals. I also added some new grease to some of the wear surfaces of the moving components. As far as scanning goes, sometimes I get a roll of 36 frames scanned perfectly, but more often I get about 15, 20, 25 frames scanned and the scanner randomly ejects the strip of film and I get salty with the machine. Another thing I just learned was set the "Focus" setting in Vuescan to "Always". Also, all of my scans show a creation date of 1/1/24. Not sure why. It's a great scanner when it behaves, I just wish it behaved more often. I guess it's showing it's age.
I've got this exact model, purchased from a camera store new-in-the-box a few years after they were discontinued. I hadn't heard of the SA-30 mod. Clever!
I Have one that is new never have been used i listed it on ebay
Hey! Yess we would love to see a comparison between those two scanning formats 🫡
I love my Coolscan 8000. It is very manual for loading though, even with my more format-optimized 3d printed holders. If I hadn't switched entirely to 120 and digital I would have to give the 5000 a serious look!
I'm curious what that anti-static brush is. Seems like something I should add to my setup.
I have a Coolscan 5000 and had the same issue with Digital ICE. I read that it is due to some kind of problem with CPU overclocking not playing nicely with the Nikon Scan software. There might be a better way, but I just ended up creating a custom power plan in Windows that set my maximum processor state to 80%. With that change I'm able to use Digital ICE without any errors while batch scanning with my SA-21 feeder.
I just use a vista VM now and its runs perfectly on Nikon Scan
@@SprocketHoles Having the exact same issue with batch scanning with the Coolscan 5000. Was it easy to get working on a VM? Could you maybe point me in the right direction on how to go about it? Could even be a video since I didn't find a good solution yet online. Thanks!
@@thor3659 I used virtual box for the VM manager and windows vista for the oOS on the VM. Once working I used the VM tools to map a folder on my host os to a drive letter on the VM so the scans transfer. I have to make sure to check the pass through for the scanner to the VM as well.
Exact same issue and this quick solution of setting max processor to 80% solved mine too, thanks!
can't wait for you to get into Hasselblad drum scanners hehe
No digital ICE tho...
I want to see automated wet mount of a 38 frame hand wound roll on an imacon, and the device needed to facilitate. I think it could warrant up to 3 ziploc baggies =D
With the CCD sensor of the scanner, you are actually scanning the color of the film. With the CMOS sensor of the digital camera methods you later have RAW processors guessing what color it was. Yeah, it works, but I just feel that to get the best color CCD scanners are still it.
great video! i'm looking forward to the comparison to camera scanning. I hear you on the dust, for me camera scanning has alleviated nearly 100% of the dust i used to get on my flatbed (and much better quality for 120 film. 35mm is always tough, although i get great results camera scanning, curious to see your comparison
Once I had Nikon LS-50. It was SO slow, I almost never used it. Having a personal Noritsu scanner is sych a relief!
I would love a Noritsu but $$$. I want one for 35mm and 120
didnt know about the door, I have the V, looks like there will be more modding on it :D but as for nikon coolscan 4.0.3 will work on 7 or vista or 10 but driver signing needs to be off, that is not a problem for 7 I think but 10 will put a sign on screen
Very helpful and informative video
Very informative video. At 11.30 It us not neccessary to run Nikon Scan with "weird unsigned drivers" to use it on Windows 11. Just install a trial of Vuescan (it includes new drivers) and then install Nikon Scan without drivers (uncheck the driver check boxes when installing, this is the important step). Use Nikon Scan 4.03. However Vuescan is probably better and easier to use.
I bought a G4 PowerBook just to run Nikon Scan with ICE. It is 100% worth it to find a solution to run Nikon Scan.
I used vuescan for years and there is no comparison between real ICE versus the dust scratch removal in vuescan.
Of course there is: compressed air. Oil-free of course. Gives you all the advantges of Vuescan without the dust probs. a
You could use VirtualBox to install a virtual windows XP or Windows 7 and then use Nikon scanner tool from there?
Or even VMWare Workstation - it's free for personal use now - no problem to assign the USB scanner to the VM with either software..
I tried that, it just didn't work. There was an instal issue with XP. I think my Pc might be goofed tbh
super informative thank you i have the scanner the SA30 , and 3 different slide-ins i guess you would call them lol , it's for a professional not me so i am listing them they are all like new but thank you for the informative video
Very good video.
As far as I know, the problem is not Nikon, but Digital ICE. Epson does not support Digital ICE anymore on Windows with Epson Scan 2, therefore they started providing Silverfast.
And the old Epson Scan does not work, I think, on Windows 64 Bit.
This is probably why scanning fails with ICE on.
My best guess is that it is some low level weird software bug causing an overflow or memory issue on newer systems.
@@SprocketHoles Yea... in any case, Epson explicitly mentions ICE not working on newer machines, so they released Epson Scan 2 without ICE.
How do you think a coolscan woukld work with half frame shots?
I have no idea
Nice Video! What brush is that ? :)
It's the negative supply one which I think is a brand of the kaiser? one.
Is there an equivalent and affordable scanner for 120 film?
There are the Coolscan 8000 and 9000 which are amazing but $$$$$$$$$
Yeah, it's a great scanner. Colors are crap tho. Even when converting through NLP. I prefer the Kodak Pakon F135. I find that I don't need 20 MP scans and am happy with 6 MP. Somehow because of the way the Kodak machine handles the film, the photos have more detail than my Nikon 5000 ED,
Dirt on the mirror is an eternal problem with those Coolscans for the simple reason that the mirror faces upwards, albeit at 45 degrees. You might want to give your films a decent clean before sticking them inside the scanner or you'll be shoving more dirt on to the mirror.
Minolta's 5400 scanners have the mirror mounted vertically - much less probs with dust.
Won't it be better to use this scanner upside down?
@@OrelRussia On the side, if anything.
Can you not run a virtual machine with VM Ware or something like that?
Trying to but I'm getting some goofy errors at the moment on virtual box.
Odd, must be a 5000 only bug, on my Coolscan V, Nikon Scan will batch scan a strip of 6 no problem.