I was born in 1953 so two years old when those pliers were made. I hadn' discovered my love of tools yet, or I would have asked my parents for a pair! Thanks for your great videos, and for getting me started in restoring vintage tools!
Another beautiful job. 1951 here. Love all those old tools from the 50s and 60s. Those Klein-Koats really make it. First learned of those on your channel. Bought six pairs in the three sizes. Put one pair on a Craftsman slip-joint pliers but I should have polished them beforehand. I learn so much from your channel. Have a beautiful weekend. 🇺🇸🇺🇸🇺🇸
Boy, would I love those pliers,,, 1955 was the best year ever,,, (guess when I was born,, ha ha..) Us electricians, here in England, always used our pliers, for reaming conduit,,,, All the best from across the pond.....
What a great question and a fascinating answer! I don't know why it never occurred to me to wonder why all the facets, it's very cool to learn a whole new function of a tool you have used forever
You know you’re living right when God bestows upon you gifts of Craftsman pin punches. The pliers look great Scoutcrafter. I’m not an electrician so I don’t really have a preference on styles. I like them both. Take care.
I like to use wax on tools too. I use Johnson's Paste Wax, but I think it's discontinued now. There are lots of similar products though. I have a paint can containing mineral spirits with a generous dollop of wax dissolved in it. I dunk the entire item into the can, and the wax solution penetrates into all the little nooks and crannies you can't reach with a rag, like inside the joints of pliers etc. The mineral spirits evaporates, leaving the wax behind. When it's dried off, I wax and buff the external surfaces in much the same way you do. The wax is only a preservative though; for tools I'm planning on using, I lubricate the moving parts with ATF.
Thank you for reminiscing about using your rubber mallet to install hub caps. Next year my dad will have been gone for 50 years and I still have his rubber mallet hanging proudly in my shop.
I remember as a young man banging my hand on the hub caps to seat them properly... Some were easier then others and some were a real challenge... Those were fun days... Like you I still miss my Dad... Thanks!
Nice work. Co-ops are all over the country, many are not called a co-op. Ben Franklin started the first one in the US for fire insurance. As far as I know all Credit Unions are co-ops. Midwest has a lot more because of immigrants as after the start of the Industrial Revolution they were basically born and by the mid 19th century their basic forms of what we know now as co-ops began. The Rockdale Society of Equitable Pioneers is considered to be the best prototype. IGA was started as 100 independent retailers working together. REI is another. Northern Minnesota, Wisconsin and the UP of Michigan were full of them. They ran little country crossroad grocery stores that carried the basic of everything farmers needed.
Funk’s is in fact a seed corn company, AND you pronounced it correctly. I’ve heard the same about the linesman’s pliers being used to de-bur also but have you ever seen wear marks on any that would indicate they were used that way?
What a transformation to the pliers! They look like they were just bought at the store. The turned out nice too and it is impressive to see it only needed a wire wheel. Thanks for sharing this.
You're right they should have put a dash in there and you said you pronounce it like you see it. I respect that. Those old Kleins you just restored open and close so nice and smooth. Looks like you are giving no effort with your hand. I have a pair of Kleins from the 90s that have been stiff since I bought them new. Nice job on the pliers and the Klein Koats look nice and original and old like me. Good eye to find the punch.
Okay, how many took a deep breath to smell the wax! I love those Klein pliers. I like the New England style most. Pigeons unionizing.... That cracked me up.
Great video. I had more tools to send you but since you asked us to stop sending tools I am driving by your neighborhood and just throwing them in the streets for you to find on your walks.
I like my Channellock 369 Round Nose Linemen's Pliers that are rounded but have one side of the nose milled for deburring. But like you I would never deburr with them.
Isaac and Absalom Funk came to Mclean County Illinois in 1824. Isaac was a state senator during the Civil War and accumulated 25,000 acres here. Funk Farms’ story is a significant part of Illinois history and agricultural development. Beautiful job on the lineman’s pliers SC.
As being an electricain from the UK. Sadly as you said there a tool. We can't carry lots of de burring tools when moving around site so your pliers get shoved down the pipe and used to take the ruff parts off. I can tell you good quality pliers like knipex will survive. Have a great weekend Scott
Hi Scott, I have seen lots of electricians use the inside of the jaws to de-burr pipe, however as an amateur I'm not on the clock so it takes me hours to do a 30 minute job,,, =D
Scoutcrafter, you better have the foundation of your home reinforced. I wonder how many tons of reconditioned tools you have. Beautiful job. Another crap to ice cream save. Thank you
Lovely restore, I can smell the wax through the screen. I had a seized lawnmower, it was solid. I removed the spark plug and squirted in some 50/50, then left it overnight. The next morning I could get very little movement from the engine, gave it some more 50/50 and let it rest again. This process was repeated over a several days, the end result is a saved lawnmower that runs smooth. All thanks to 50/50 and you for sharing that tip. Love the videos, cheers from NZ.
I like this shop rags, but nothing beats proper cloth. I don't know if it's everywhere, but where I live Goodwill has an outlet center where they sell rags for like $2.50 for a garbage bag. It is all pre-laundered and things like buttons are removed. Makes for great shop rags for cheapskates
I remember my Grandfather taking me to the co-op and buying seed corn. I owned several Funk's hats. As for the punch, Gear adrift is a gift. I found a complete set of 1/2" drive sockets and a perfect ratchet in the middle of the road the only issue was a broken latch on the case. They live in my truck tool box now
Awesome restoration Scout! I’m with you. Co-op should have the dash! Friday used to be my favorite day but is now cleaning day since retiring. 😩 Have a great weekend!
I was born in 1955 John! Something that is interesting is those little pamphlets you can buy that shows the cost of things in the year you were born. Nice klein pliers . The red handles really make them beautiful! 👍🇺🇸 Roger
13:13 good stuff cutting at 13:15 then explanation of cutting and 1955.. plus bonus Craftsman punch he found on.. walk!!! How much is that? Free punch.. also take advantage of the great weather..thank you John have a fantastic weekend everyone 🤝👊✌️
I really like the Koats and I'd like a pair and an Estwing but what I have must be good enough for who it's for! Just got a pin punch set to fix my mower hoist. I had a set years ago but they got wanderlust! NewEngland for me! Happy weekend, John CS! GBWYou, Pal!
HI john, Great video. I was watching and decided to use the chart to find out how hold the set of Klein Bell System Linesman Pliers that you polished up for me was. The code is M N E. That tells me they were made in the first quarter of 1964. They are the New England Style. Stands to reason since Bell didn't run much in electro mechanical tubing. (EMT for short) When I was looking at the pliers I noticed that the pivot was smaller that the traditional linesman pliers and closer to the cutting edge. I think that would increase the leverage and let them cut easier. I put Klein Koats on them and they are beautiful. All three polished up pliers are on my editing desk. Right where I can see them all the time. 😁😎
Another great job brother. Have a pair of NE style and a set of grips to complete to job when I finish. Nice find on the pin punch. Western forge square stock. Always liked them a little better that the black oxide. Stay safe
Sorry I've been MIA from the channel in your comment section been so busy I'm lucky I can check out certain RUclipsrs I watch but you're one I always do mention in my videos lately as an inspiration
Beautiful job on the Kleins and I prefer the New England style. I just finished a couple of Pexto pliers and after using your critical inspection method I realized I need to take 2 steps back to the flap disc. Thanks a lot JOHN. LOL.
John, thanks for mentioning that, it IS stealing, for one to take something they found like that back for replacement. Too many people today think otherwise....and that is why we are losing all the good store guarantees.
I would lean towards the New England style myself. I like the streamline look. Fantastic restorations on your pliers. And I gotta say one more time. That translucent red on those Klein Koats. FANTASTIC!!
I don't restore tools to be fine art objects, I restore them as they might have been new or at least before they were neglected. I leave some of the dings and scars as badges of their history. But keeo on doing it your way since that is what you enjoy. My linesman pliers are Craftsman faceted head ones with black vinyl grips bought about 1975 or so along with a similar set of diagonal cutters. Still working perfectly after all these years of DIY use. Does anyone know who made those tools for Craftsman in that time period?
Excellent video I have a soft spot for Linesmans Pliers being an electrician . could you do a video on how to repair linesman cutting jaws that are nicked or blown out from an arc? I love Klein coats also!
Hi Robert- I have passed on so many pliers with damaged jaws because there is no way to repair them... Klein cutters are induction hardened and should last a lifetime but sometimes a live wire or trying to cut a hardened rod will leave that tell-tail hole in the cutters... Some look like they could act as a wire stripper! LOL Thanks!
Ahh another one in the can what a sweeeet set of pliers Scout where do you get the Klein costs from eBay or Amazon Or somewhere else great video the god bless take care have a great weekend 🙏🇺🇸🗽🇳🇿⚔️
If you want to smell a wax that will tickle the nostalgic recesses of your mind, try Briwax. I use it the same as you use the Mothers, and the mothers reminds me of the Halloween wax lips from data gone by, but still actually exist. There’s a few kinds of Briwax. I like either the amber or the clear. Very good on wood too, obviously.
Yet another great show. Don't feel bad about the co-op. Once a week my wife and I go get chicken at chicken coop See you on Monday Have a Jesus filled day everyone Greg in Michigan
I thought I was having Deja Vu with the third set of pliers, but now I see it’s a complete set. Nice. I noticed yoU were saying COOP and not Co Op, but you already explained to us that you pronounce it like it’s spelled. BTW I got strange looks when I complained about the mechanic not putting my hubcap on right and it getting lost. They told me they don’t remove the hubs to do brakes. I then said, “oh I mean wheel cover.”And they still had no idea. So I pointed to the bare rim and said “that plastic thing, the hub cap, wheel cover, whatever.” Not sure I should go back to a mechanic that doesn’t know what a wheel cover is!
I have many pliers including several pairs of Klein's . Two of them have the Klein coats on them and I seldom reach for them. The handles just feel a bit too bulky for me. My favorite pliers have bare metal handles. Just a matter of personal preference.
When you did those Cheapy Buffalo's the other day I was thinking I probably would've just rounded them instead of trying to keep the facets. You're scoring on your walks lately, I haven't been able to find any good stuff which is strange since normally I see tons of good stuff even on a short walk.
SC, When grinding down the rivet, does that compromise the tightness of the joint of the pliers are to actually be used? After all, only the very outer portion is peened over. I also WISH you would do as much as possible to preserve the original markings like the man on the telephone pole! YES - it's always nice to get every last pit and scratch out, but IMHO a true restoration is to keep all the original markings even if a few minor pits are left to be visible. Beauty is in the eye of the beholder I suppose.
The rivets used are quite thick and are not compromised by removing a very small surface area. Not to mention there is very little lateral force applied to the rivets. As for the markings, everyone wants to keep them but sometimes it is impossible if you are trying to achieve a finish that makes the tool desirable. There are many thousands of Klein pliers with patina and pits that wouldn't get a second look. (With all the markings) If brown tools are your thing then you will never have to lift a finger because they are always around...
@@ScoutCrafter Appears true. en.wikipedia.org/wiki/Western_Forge I have many of those Craftsman punches, including the one you found. Another informative show! Thanks.
Great work this week!! I found Knipex makes linemans pliers now, they're on my wishlist I think, price is bit hefty but you can't buy the real deal here. I was going trough my shed today and found my horse hoof's file (wich I mistakenly bought because I thought it was a giant wood file). Still wondering what your plans were with that thing when you bought it;) Thank you. I hope you'll have a great weekend!!
A lot of good things were from 1955. Myself included. I also feel that people who find old tools, or buy them from second hand shops/ garage sales and then return them for warranty issues are in fact stealing.
Craftsman was such a great company that always put out great products and stood behind them... Unfortunately some people took advantage of their good nature and now Sears is all but gone... I wish more people would think about the big picture... Thanks!
You mentioned tennite several times in reference to the Klein coats. I presume that is the material there made out of. What makes tennite different from plastic or acetate? Is it only available in kleincoats?
Those early hours walks, John, surely the cops have pulled up on a few occasions while you had a plank of wood on your shoulder at 3am? Any funny stories you'd like to share?
I was born in 1953 so two years old when those pliers were made. I hadn' discovered my love of tools yet, or I would have asked my parents for a pair! Thanks for your great videos, and for getting me started in restoring vintage tools!
Interesting info on the Kleins. I've got a few older pairs. They are great tools. Thanks for sharing!
Another GREAT show!!!!!!!
Beautiful Klein's!
They are jewels. Lovely work. Regards.
Those Klein handle covers remind me of the 50's pin up models with nice long stockings on
Thanks for the show. Cheers
1953 Nice pliers!👍
Another beautiful job. 1951 here. Love all those old tools from the 50s and 60s. Those Klein-Koats really make it. First learned of those on your channel. Bought six pairs in the three sizes. Put one pair on a Craftsman slip-joint pliers but I should have polished them beforehand. I learn so much from your channel. Have a beautiful weekend. 🇺🇸🇺🇸🇺🇸
Tony- I wish they made them in different colors!
ScoutCrafter Me,too. A nice emerald green, a bright orange, or a cobalt blue!
New England style for sure. I’m an electrician I use channel locks for reaming conduit. Good looking project
Boy, would I love those pliers,,, 1955 was the best year ever,,,
(guess when I was born,, ha ha..)
Us electricians, here in England, always used our pliers, for reaming conduit,,,,
All the best from across the pond.....
John ‘55 was a fantastic year!! 😃👍
What a great question and a fascinating answer! I don't know why it never occurred to me to wonder why all the facets, it's very cool to learn a whole new function of a tool you have used forever
You know you’re living right when God bestows upon you gifts of Craftsman pin punches. The pliers look great Scoutcrafter. I’m not an electrician so I don’t really have a preference on styles. I like them both. Take care.
I like to use wax on tools too.
I use Johnson's Paste Wax, but I think it's discontinued now. There are lots of similar products though.
I have a paint can containing mineral spirits with a generous dollop of wax dissolved in it.
I dunk the entire item into the can, and the wax solution penetrates into all the little nooks and crannies you can't reach with a rag, like inside the joints of pliers etc.
The mineral spirits evaporates, leaving the wax behind.
When it's dried off, I wax and buff the external surfaces in much the same way you do.
The wax is only a preservative though; for tools I'm planning on using, I lubricate the moving parts with ATF.
Nice job on the Klein pliers.
"And Bobs your uncle." Thanks John. Long time friend of the show. You are a joy to listen to
Yep. 1955. The line that cracks me up is, "It feels strange being the same age as old people."
Thank you for reminiscing about using your rubber mallet to install hub caps. Next year my dad will have been gone for 50 years and I still have his rubber mallet hanging proudly in my shop.
I remember as a young man banging my hand on the hub caps to seat them properly... Some were easier then others and some were a real challenge... Those were fun days... Like you I still miss my Dad... Thanks!
Nice work. Co-ops are all over the country, many are not called a co-op. Ben Franklin started the first one in the US for fire insurance. As far as I know all Credit Unions are co-ops. Midwest has a lot more because of immigrants as after the start of the Industrial Revolution they were basically born and by the mid 19th century their basic forms of what we know now as co-ops began. The Rockdale Society of Equitable Pioneers is considered to be the best prototype. IGA was started as 100 independent retailers working together. REI is another. Northern Minnesota, Wisconsin and the UP of Michigan were full of them. They ran little country crossroad grocery stores that carried the basic of everything farmers needed.
Philip- Here in the big city the only Co-Op we know of is those condo like apartments! 😂👍
Funk’s is in fact a seed corn company, AND you pronounced it correctly. I’ve heard the same about the linesman’s pliers being used to de-bur also but have you ever seen wear marks on any that would indicate they were used that way?
Cory- It's funny but I have never seen wear marks indicating de-burring use on any pliers! Ever! =D
What a transformation to the pliers! They look like they were just bought at the store. The turned out nice too and it is impressive to see it only needed a wire wheel. Thanks for sharing this.
Scoutcrafter you're amazing, my dear old Dad used to 'smell' new books! Great video as always, TGIF👍🇺🇸🇬🇧
got to love the fact, you always on time and you are part of my weekly go to comfort station/video/txs for sharing
You're right they should have put a dash in there and you said you pronounce it like you see it. I respect that. Those old Kleins you just restored open and close so nice and smooth. Looks like you are giving no effort with your hand. I have a pair of Kleins from the 90s that have been stiff since I bought them new. Nice job on the pliers and the Klein Koats look nice and original and old like me. Good eye to find the punch.
It DEFINITELY screws up the finish on the pliers! Thank You for the shout out, Sir. You are a true gentleman!
I like the diamond style and I am a 1955 product! Thanks
Very nice!!! '55 was a great year!
Lol, congratulations for making it this far! Great stuff!
Hooray, that 1955 Klein pliers looks great, always love the Klein-Koats.
I’ve had the same pair of Klein linesman pliers for 11 years now working as an electrician. Love them!
Mark- Klein Pliers really are the best! 😃👍
Wow John I’m amazed every time you do a restoration. They all look like jewels, too nice to be used again Lol! Great work as always
Thanks John! It's always a pleasure to watch and makes me want to finally clean out the garage and set up a little workshop...
Wow, great restoration! And those handles really take it over the top.
One reason I enjoy watching your restoration is because you seem to be a perfectionist. Keep doing what you are doing.
Okay, how many took a deep breath to smell the wax! I love those Klein pliers. I like the New England style most. Pigeons unionizing.... That cracked me up.
great show. thanks
Really nice set of pliers there and another awesome job completed!
Great video. I had more tools to send you but since you asked us to stop sending tools I am driving by your neighborhood and just throwing them in the streets for you to find on your walks.
LOL!!!!!!!
Nice man.. I like all 3 really.. very sharp ! Nice video
I like my Channellock 369 Round Nose Linemen's Pliers that are rounded but have one side of the nose milled for deburring. But like you I would never deburr with them.
Isaac and Absalom Funk came to Mclean County Illinois in 1824. Isaac was a state senator during the Civil War and accumulated 25,000 acres here. Funk Farms’ story is a significant part of Illinois history and agricultural development. Beautiful job on the lineman’s pliers SC.
As being an electricain from the UK. Sadly as you said there a tool. We can't carry lots of de burring tools when moving around site so your pliers get shoved down the pipe and used to take the ruff parts off. I can tell you good quality pliers like knipex will survive. Have a great weekend Scott
Hi Scott, I have seen lots of electricians use the inside of the jaws to de-burr pipe, however as an amateur I'm not on the clock so it takes me hours to do a 30 minute job,,, =D
Scoutcrafter, you better have the foundation of your home reinforced. I wonder how many tons of reconditioned tools you have. Beautiful job. Another crap to ice cream save. Thank you
Lovely restore, I can smell the wax through the screen.
I had a seized lawnmower, it was solid. I removed the spark plug and squirted in some 50/50, then left it overnight. The next morning I could get very little movement from the engine, gave it some more 50/50 and let it rest again. This process was repeated over a several days, the end result is a saved lawnmower that runs smooth. All thanks to 50/50 and you for sharing that tip.
Love the videos, cheers from NZ.
That 50-50 works so great and is very economical to mix up a batch. I’m so glad you got the mower running! 😃👍
I like this shop rags, but nothing beats proper cloth. I don't know if it's everywhere, but where I live Goodwill has an outlet center where they sell rags for like $2.50 for a garbage bag. It is all pre-laundered and things like buttons are removed. Makes for great shop rags for cheapskates
I remember my Grandfather taking me to the co-op and buying seed corn. I owned several Funk's hats. As for the punch, Gear adrift is a gift. I found a complete set of 1/2" drive sockets and a perfect ratchet in the middle of the road the only issue was a broken latch on the case. They live in my truck tool box now
Great job as always we have farmers co-ops here in Tennessee
That cleaner wax smell u just hit it on the nail that shit is awesome and then you see the final polish its a dream come true
Awesome restoration Scout! I’m with you. Co-op should have the dash! Friday used to be my favorite day but is now cleaning day since retiring. 😩 Have a great weekend!
The New England style fits in back pocket ….
Perfect restoration as always. Great job.
Beautiful restorations... the handles sure make them even more stunning! Have a good'un and enjoy the weekend!
I was born in 1955 John! Something that is interesting is those little pamphlets you can buy that shows the cost of things in the year you were born. Nice klein pliers . The red handles really make them beautiful! 👍🇺🇸 Roger
Roger! ‘55 was a great year!!! 😃👍
13:13 good stuff cutting at 13:15 then explanation of cutting and 1955.. plus bonus Craftsman punch he found on.. walk!!! How much is that? Free punch.. also take advantage of the great weather..thank you John have a fantastic weekend everyone 🤝👊✌️
Hello from uk.
John, again, well done. Very nice!
I really like the Koats and I'd like a pair and an Estwing but what I have must be good enough for who it's for! Just got a pin punch set to fix my mower hoist. I had a set years ago but they got wanderlust! NewEngland for me! Happy weekend, John CS! GBWYou, Pal!
Which do I prefer? Well, all lying there in red together like a set? - I like the set! Cool, John
btw have you seen my 1/8 punch anywhere...
HI john,
Great video. I was watching and decided to use the chart to find out how hold the set of Klein Bell System Linesman Pliers that you polished up for me was.
The code is M N E. That tells me they were made in the first quarter of 1964. They are the New England Style. Stands to reason since Bell didn't run much in electro mechanical tubing. (EMT for short)
When I was looking at the pliers I noticed that the pivot was smaller that the traditional linesman pliers and closer to the cutting edge.
I think that would increase the leverage and let them cut easier.
I put Klein Koats on them and they are beautiful.
All three polished up pliers are on my editing desk. Right where I can see them all the time. 😁😎
Hi Dave! I wish every manufacturer would put date codes on their tools as for me it adds lots of interest to the tool... =D
Another great job brother. Have a pair of NE style and a set of grips to complete to job when I finish. Nice find on the pin punch. Western forge square stock. Always liked them a little better that the black oxide. Stay safe
Man this was a amazing outcome. Lol the pigeons are getting organized. Have a great weekend everyone. Be safe out there 🐱👍
Sorry I've been MIA from the channel in your comment section been so busy I'm lucky I can check out certain RUclipsrs I watch but you're one I always do mention in my videos lately as an inspiration
Beautiful job on the Kleins and I prefer the New England style. I just finished a couple of Pexto pliers and after using your critical inspection method I realized I need to take 2 steps back to the flap disc. Thanks a lot JOHN. LOL.
Love these pliers,sir..and covers too..
1:19 ScoutCrafter: I sold my Homing Pigeon on eBay, for the 47th time! =P
John, thanks for mentioning that, it IS stealing, for one to take something they found like that back for replacement. Too many people today think otherwise....and that is why we are losing all the good store guarantees.
High waters!!! We called them, "floods" when I was a kid.
They always looked goofy! 😂😂😂👍
I can just smell that wax from here :) love that scent.
I would lean towards the New England style myself. I like the streamline look. Fantastic restorations on your pliers. And I gotta say one more time. That translucent red on those Klein Koats. FANTASTIC!!
I have those pliers. They were my dad's.
I don't restore tools to be fine art objects, I restore them as they might have been new or at least before they were neglected. I leave some of the dings and scars as badges of their history. But keeo on doing it your way since that is what you enjoy.
My linesman pliers are Craftsman faceted head ones with black vinyl grips bought about 1975 or so along with a similar set of diagonal cutters. Still working perfectly after all these years of DIY use. Does anyone know who made those tools for Craftsman in that time period?
Excellent video I have a soft spot for Linesmans Pliers being an electrician . could you do a video on how to repair linesman cutting jaws that are nicked or blown out from an arc? I love Klein coats also!
Hi Robert- I have passed on so many pliers with damaged jaws because there is no way to repair them... Klein cutters are induction hardened and should last a lifetime but sometimes a live wire or trying to cut a hardened rod will leave that tell-tail hole in the cutters... Some look like they could act as a wire stripper! LOL Thanks!
3-7-51 makes me 70 1/2. I like New England pliers and the funny way the people talk. I'm a Georgia boy and I know about talking funny. LOL. Jim
LOL- Nobudy can Tawk like a New Yawker!
Poop! I'm actually one year OLDER than the the Kleins! And they look a hell of a lot better too! I like the look of the smoother New England style.
Ahh another one in the can what a sweeeet set of pliers
Scout where do you get the Klein costs from eBay or Amazon
Or somewhere else great video the god bless take care have a great weekend 🙏🇺🇸🗽🇳🇿⚔️
Hi Matt! I got these from Amazon...
If you want to smell a wax that will tickle the nostalgic recesses of your mind, try Briwax.
I use it the same as you use the Mothers, and the mothers reminds me of the Halloween wax lips from data gone by, but still actually exist. There’s a few kinds of Briwax. I like either the amber or the clear. Very good on wood too, obviously.
Yet another great show.
Don't feel bad about the co-op.
Once a week my wife and I go get chicken at chicken coop
See you on Monday
Have a Jesus filled day everyone
Greg in Michigan
The Kline came out fantastic! Not sure which ones I prefer or if it matters. Thank You for sharing
7-17-1955 --- I'M 66 ---
YAA MON ~ ANOTHER BEAUTFUL PLIERS
I thought I was having Deja Vu with the third set of pliers, but now I see it’s a complete set. Nice. I noticed yoU were saying COOP and not Co Op, but you already explained to us that you pronounce it like it’s spelled.
BTW I got strange looks when I complained about the mechanic not putting my hubcap on right and it getting lost. They told me they don’t remove the hubs to do brakes. I then said, “oh I mean wheel cover.”And they still had no idea. So I pointed to the bare rim and said “that plastic thing, the hub cap, wheel cover, whatever.” Not sure I should go back to a mechanic that doesn’t know what a wheel cover is!
LOL- You are so right... My favorites were Baby moons and beauty rings!
How are you my friend !!!! Another exelent video
Boy those sure are beautiful. I wish Klein would make a wide range of sizes and colors with those Klein Coats. I'd put them on everything.
Ben- I would love to see orange, Green and Blue and Yellow!!! 😃👍
@@ScoutCrafter And clear. :)
Enjoyable!
I have many pliers including several pairs of Klein's . Two of them have the Klein coats on them and
I seldom reach for them. The handles just feel a bit too bulky for me. My favorite pliers have bare metal handles. Just a matter of personal preference.
Buddy- I too prefer bare steel handles! We must be old school! 😃👍
Oh I worked for them in 1977 Skokie Illinois were used a sanding belt to polish
Steve- Did you see the anniversary and special edition pliers that they offered? Very nice! Awesome company!
When you did those Cheapy Buffalo's the other day I was thinking I probably would've just rounded them instead of trying to keep the facets.
You're scoring on your walks lately, I haven't been able to find any good stuff which is strange since normally I see tons of good stuff even on a short walk.
that looks amazing john 👍🇨🇦
SC, When grinding down the rivet, does that compromise the tightness of the joint of the pliers are to actually be used? After all, only the very outer portion is peened over. I also WISH you would do as much as possible to preserve the original markings like the man on the telephone pole! YES - it's always nice to get every last pit and scratch out, but IMHO a true restoration is to keep all the original markings even if a few minor pits are left to be visible. Beauty is in the eye of the beholder I suppose.
The rivets used are quite thick and are not compromised by removing a very small surface area. Not to mention there is very little lateral force applied to the rivets. As for the markings, everyone wants to keep them but sometimes it is impossible if you are trying to achieve a finish that makes the tool desirable. There are many thousands of Klein pliers with patina and pits that wouldn't get a second look. (With all the markings) If brown tools are your thing then you will never have to lift a finger because they are always around...
The pin punch was made by Western Forge, as well as lots of Craftsman tools. They closed down last year.
I didn’t know they closed down! Shame... Thanks!
@@ScoutCrafter Appears true. en.wikipedia.org/wiki/Western_Forge
I have many of those Craftsman punches, including the one you found.
Another informative show! Thanks.
I've got a set from 1945, love the date codes
Great work this week!! I found Knipex makes linemans pliers now, they're on my wishlist I think, price is bit hefty but you can't buy the real deal here.
I was going trough my shed today and found my horse hoof's file (wich I mistakenly bought because I thought it was a giant wood file). Still wondering what your plans were with that thing when you bought it;)
Thank you. I hope you'll have a great weekend!!
1952 here
Can you see the date code through the Klein Coats? I have a 1944 Klein. They're in great shape and I want to put Klein Coats on them.
Any tips on how to sharpen the linesman cutters on a full pair?
Ohhhhh those handles ❤️❤️❤️❤️
...GOTTA LOVE THOSE KLEIN'S...KEEP SAFE..
A lot of good things were from 1955. Myself included. I also feel that people who find old tools, or buy them from second hand shops/ garage sales and then return them for warranty issues are in fact stealing.
Craftsman was such a great company that always put out great products and stood behind them... Unfortunately some people took advantage of their good nature and now Sears is all but gone... I wish more people would think about the big picture... Thanks!
Hi Scout crafter Klein linesman pliers here new are between $50. and $65. plus 13% sales tax depending on the model at home depot.
I often wonder why they offer different grades...
The 2000 series have harder cutters. With marginal skill you can booger them up also.
You mentioned tennite several times in reference to the Klein coats. I presume that is the material there made out of. What makes tennite different from plastic or acetate? Is it only available in kleincoats?
Yes they say the covers are made of tenite whatever that is... 😂. I must say they are wonderfully durable and look amazing. Well worth the $10!
When it come to linesman pliers Kline is the tool I prefer even over more expensive brands the new England head I prefer better
Those early hours walks, John, surely the cops have pulled up on a few occasions while you had a plank of wood on your shoulder at 3am? Any funny stories you'd like to share?