Two amazing methods for laser welding thin stainless steel tubes.

For information on welders and peripheral devices, please contact the manufacturer to receive a more accurate answer.
↓↓↓↓↓↓↓
[e-mail]
Hello everyone.
Today we will introduce two methods for welding thin stainless steel tubes.
Although the welding speed is the same, the penetration depth can be adjusted by varying the laser power.
And different penetration depths can be applied depending on the situation.
When welding without purging the inside of the pipe, low penetration welding is necessary to prevent oxidized blooms from forming inside the pipe.
If the inside of the pipe needs to be purged with gas and welded with complete penetration, deep penetration welding is required.
Of course, more diverse penetration depths can be adjusted by adjusting the welding speed or laser power.
I will introduce those as well later.
Thank you for watching and have a great week.
#thin
#pipe
#laser
#welding
#test
#electropolishing
#factory
#machine
#steel
#crafts
#Tips
#secret
#trick
#amazing
#DIY
#idea
#future
#technology
#technique
#HAGOJIBI
#video
#weldingmachine
#laserwelder
#laserweldingmachine

[@weldHAGOJIBI]

여러분 안녕하세요.
오늘은 얇은 스테인레스 튜브를 용접하는 두가지 방법을 소개시켜드립니다.
용접 속도는 같지만 레이저 출력을 다르게 하면 침투 깊이 조절이 가능해집니다.
그리고 서로다른 침투깊이는 상황에 따라서 응용이 가능합니다.
파이프 내부를 가스퍼지 하지않고 용접할때 파이프 내부에 산화된 꽃이 피지 않게 용접하기 위해서는 낮은 침투용접이 필요합니다.
파이프 내부에 가스퍼지를 하고 완벽한 침투로 용접해야하는 경우에는 깊은 침투용접이 필요합니다.
물론 용접 속도나 레이저 출력을 조절하면 더 다양한 침투깊이도 조절이 가능합니다.
그런것들도 차후에 소개시켜드리도록 하겠습니다.
시청해주셔서 감사합니다 그리고 즐거운 한주 보내세요.
용접기 및 주변기기에 대한 내용은 제조사에 문의 하시면 더 정확한 답변을 얻으실수 있습니다.
↓↓↓↓↓↓↓
[e-mail]
내쇼날시스템 대표전화
051-941-9701~2

[@kevinbacon8716]

I'm curious if a laser welder like this could be used on something structural like a race car's roll cage.

[@timmontano8792]

Do you use different wire for different metals? These videos never show anyone changing wire when using laser welders on different kinds of metals.
They make it look like they use the same kind of wire for every kind of metal welding.

[@yeha114]

Tentunya setiap pengelasan dengan bahan berbeda pasti menggunakan kawat las yang berbeda, saat ini saya di korea, dan tahu persis, karena sering berhubungan dengan segala macam alat las

[@user-fd1wp5tn4p]

Thank you good job ❤

[@bagheadbaby]

Can you get this to pass NDT?

[@martinfarrow2825]

What turn table do you use

[@viorsa8200]

Ok, fantástico trabajó maestro.👍🤓😜

[@alfredomorales4467]

Como consigo estos equipos nswel . Saludos

[@alfredomorales4467]

Saludos, cómo puedo conseguir equipos nswel en México

[@user-wc1zf7qt1s]

Why is the surface dirty? No weld shine


[@joechavez1788]

How much does this laser welder cost in American currency

[@sertancehreli8781]

I would never use it for pipe welding and I would not recommend it. The source visuals are incredibly bad. HAGO, I didn't expect such a bad video from you, I'm sure you're aware of it. stay with love 🤜🤛

[@user-ix8tm7qh3t]

Не для нашего завода

[@alknis]

Конечно. Святые санкции помогают.