Definitely big help thank you! I bought this thing used so I didn't get the instruction manual I had no idea that these settings were even in there. I thought it was fast on level 3 punch I'm about to find out right now on level 5. Also I couldn't figure out why some other people could break harder and mine were really slow this pretty much showed me it all! Got the settings all dialed in and now if I can only figure out how to do what I actually came to RUclips to figure out how to do and that is how to bind the stupid controller. My buddy messed with my car earlier and now it doesn't work anymore.
Awesome! I am so glad to help. The punch setting won't give you more top speed. It just give more start power/punch. Wish I had a video on the radio for ya. But I don't. Appreciate you stopping by 👊 🤘
Since I have you here you don't know anything why the stupid spectrum ESC blinks of red light really fast every time I turn it on? Every red light flashing video that I've watched has not been able to help.
Man I looked there's so many of them that I don't know which one is for this one. Also just so you know I am literally like brand new to this hobby. Like I said normally I build race cars and race but I can't believe I haven't gotten into this earlier. This is my first one I bought it off of some drug addict I thought I was going to sell it to make some cash but once I started playing with it I got hooked 😄
Dude u made this so easy, thank you after watching a few other videos it was so confusing till I got to your video thanks again I'm subbing your channel..
Right on! Thank You so much. Very glad it helped. Appreciate the sub too. Stop on back for more action. I am into all 5th scales. Gas and brushless. 👊🤘
Awesome! I was trying to make it short and sweet so it can be used for quick reference. Appreciate the positive feedback. Check out some of my other videos!!
Sometimes straight up and to the point is where it's at. Kinda made the video for reference when I am out in the field and want to change a setting. I re-watch this video lol. Appreciate you stopping by 👊 🤘
thanks man! losi SBR 2.0 here and for some reason they decided "Medium" low voltage settings were safe, first run both my batteries had a cell go under 3v. Set it to "High" !
Smart move. I would rather lose a few minutes run time than ruin my expensive lipos an possibly the rig. I am happy with a 3.6 to 3.7 end point per cell. Good info and thanks for stopping by brother 👍
Glad to hear man! I wanted to put something out there that is straight to the point so if somebody needed the info on the fly it would be available. Appreciate you stopping by!!
Awesome. Glad it helped. I am not one who likes reading books and find videos easier to complete a task. The wire clips are sweet hey. I think the batteries need a strap fron to rear also. Just for a little more support. I am gonna measure the size here soon for that. Appreciate you stopping by man🤘👊
Hey thanks! Tried keeping it to the point with minimal babble lmao. Last thing needed is babbling when you are trying to get your ESC set up. Glad to help 👊🤘
If people are anything like me. They find it easier to watch a video on how to do something than read it. I wasn't gonna spend $35 to 40 on a program card that I will use once. So I read the book on how to do it manually. Thanks for watching Jeff
That's cool you did this how to cause that manual can be confusing an what yr is your fox body I have a 93 cobra but with a big turbo lsx .otor in it an yes I do have the numbers matching motor
Ya I had to reread that manual five times and still had it in front of me doing the video ahahahah. The Mustang is a plain jane 1987 stock 5.0 5 sp hatch. Love it cos I am not afraid to drive it.. I will go out to eat and leave it etc. No worries. But man. I gotta ask. Why ruin a Cobra to just put a Chevy in it? Something like mine would be less hurtful ahahaha.
No problem! The battery buckles had me scratching my head also. Finally figured out their intentions for them. Glad to have helped ya out. Appreciate you stopping by 🤘👊
@@SteelCityRC I changed mine out to drone straps, shorter and easier to strap without the buckle thing In The way....amazon helped me out on that one..lol
Yeah there are a few ways to make setting adjustments. I made this quick video to specifically show that the SET button could be used fairly easily too. Happy RCing 👊🤘
@@SteelCityRC thanks for the info.. and if you want to reset it you just hold the set buttong for 5 seconds until it blinks green right? Then everything is in stock factory settings?
Hey Thanks!! So glad to help. Between the punch on 5 and 23T pinion it really helped. Oh and the brakes at 50 percent work good too. Appreciate you stopping by!
I am not sure why adjusting the punch level and brake level would do that. Maybe recalibrate the ESC to the radio, then adjust punch etc. Also make sure no knobs on the radio got bumped. Good luck.
@@SteelCityRC I think I may have bumped the controller is why it was doing that but now it’s not doing it anymore after we reset everything and recalibrated
I have a firma speed control I'm setting. Mine is for the brushed motor but they program the same from my understanding. I'm programming it for an airboat. It seems slower than the old conductor style. Any way let's just say forward is running at 100% reverse is only at 30 I have a feeling it's confusing the brake feature with reverse so in reverse its not giving me much power only 30% or so instead of 100% reverse so I'm pretty sure I need to program it differently
Those red and black wires that run from the ESC fan and plug into that connector into the ESC itself, then it is two more red and black wires that run from that connector into another connector, mine is broken right there from a crash, how am I able to fix that or can I just get a wire harness and connect everything that way?
Hello. If there is enough meat per say to the wire. You can strip back the insulation and solder the wires up with shrinktubing around each wire. If no room maybe contact Horizon Hobby through email or phone for a remedy. Sorry that happened. And if I saw exactly what you mean I could give a better idea what to do. Appreciate you stopping by 👊🤘
What's up man. I have the Outcast 8S. Since putting a 23T pinion and punch 5 it is much much better. Before that. It was lacklustered. Thanks for stopping by.
Good question. Just doing a Google search it states specs for 7.2v. So I am guesing 7.4v would be their max. But if you think about it. A 2S lipo is 8.4v fully charged. Also have to see if the receiver is capable also. Wish I was more help. Thanks for stopping by!!
@@SteelCityRC yess exaxtly saw that too but considering there are just 2 options on the esc 6.0 and 8.4V i would guess it wouldnt kill the servo. Thanks for your reply👍🏼
Hey what's up man! Yes it is a fox there. A 1987 5 speed. Love that little car bro. I am totally with you. Mustangs and RC's rule the world lol. Appreciate you stopping by 👊 🤘
Hello. I wasn't sure till I looked in the manual. Reverse is not able to turn off and on. Can just turn down the reverse strength. 25% looks to be the lowest. No off choice. Hope that helps!!
That is a good question that I do not have the answer to. I would think you would need the programmer designed for this esc. Maybe in the manual it will have directions to reset? That is where I read how to change settings using the set button. Sorry I am no help... Thanks for stopping by 👊 🤘
My name is Terry can anyone help me out with my new arrmor Vortech I bought it new ran it a couple of times it lose signal I call Horizon hobby they sent me a new ESC I followed my Manual and Finally got it to bind throttle now it loose steering what do I do to fix this
Hello. It almost sounds like the receiver is bad. I would talk to Horizon about it over the phone. They can do an over the phone diagnosis with you to find out. Hope you get it figured out soon! Thanks for stopping by 👊 🤘
Do you have the owners manual for this truck? It almost sounds like you need to recalibrate the ESC to the radio. How it would have lost that during parameter adjustments is beyond me.
@@SteelCityRC yes I do I also have the Esc and brushless motor maunel.The truck name is Granite mega550 and both esc and brushless motor are made by spectrum.
@@rctiprccarvids3080 this video was made for the 8S line of Arrma rigs with Spektrum electronics stock. It may be different procedures for your rig. Sorry I'm not more help
Sorry man! I am no help there. I put a Futaba radio system in mine. I would search Spektrum DX3 binding if you have that radio in the YT search bar. Good luck👊🤘
I was just reading in my Outcast 8S manual. It says "LED flashes red with short single pulses --LVC protection activated ". So in real talk. Your batteries have been depleted down to the low voltage cut off. Re balance charge your lipos and try again?
Ahahahaha! Right on man! That was funny. It actually did really well set up like that. Me that can't leave anything alone put a Castle mmx8s and 800kv motor in it. It rips now. But very front heavy. Check it out. Thanks for stopping by and for the chuckle 😄
Done that on mine still no bloody brakes got myself the ESC progammer but even somone who has 10yrs IT is having trouble getting 2 their software contaced the tech staff even told me what 2 do followed 2 the letter still nothing it i just think they r way 2 heavy & should b fitted with mech brakes in all of them getting a little fedup now enenyone got ideas comment here or manjez.jt@gmail.com thanks
Sorry to hear that. I still wasn't happy with the stock electronics. So I put a Castle mmx8s and 800kv motor. Now it rips! And actually stops. Hope you get it sorted. Thanks for stopping by
This was really usefull! Because the stupid spektrum software is still out of date, so i used this way to fix my issues. Thx for that!
Awesome man! So glad to hear!
Awesome, a simple quick straight forward video. Cant wait to try this tomorrow, thank you
Perfect! So glad to help!
Definitely big help thank you! I bought this thing used so I didn't get the instruction manual I had no idea that these settings were even in there. I thought it was fast on level 3 punch I'm about to find out right now on level 5. Also I couldn't figure out why some other people could break harder and mine were really slow this pretty much showed me it all! Got the settings all dialed in and now if I can only figure out how to do what I actually came to RUclips to figure out how to do and that is how to bind the stupid controller. My buddy messed with my car earlier and now it doesn't work anymore.
Awesome! I am so glad to help. The punch setting won't give you more top speed. It just give more start power/punch. Wish I had a video on the radio for ya. But I don't. Appreciate you stopping by 👊 🤘
Yes I know the top speed is in the motor timing setting. I build race cars so it's somewhat similar. And also I like my punch! 😄
Since I have you here you don't know anything why the stupid spectrum ESC blinks of red light really fast every time I turn it on? Every red light flashing video that I've watched has not been able to help.
@@ValleyMustang good question. I would have to look in the book that came with it. I know you can download the manual online.
Man I looked there's so many of them that I don't know which one is for this one. Also just so you know I am literally like brand new to this hobby. Like I said normally I build race cars and race but I can't believe I haven't gotten into this earlier. This is my first one I bought it off of some drug addict I thought I was going to sell it to make some cash but once I started playing with it I got hooked 😄
Dude u made this so easy, thank you after watching a few other videos it was so confusing till I got to your video thanks again I'm subbing your channel..
Right on! Thank You so much. Very glad it helped. Appreciate the sub too. Stop on back for more action. I am into all 5th scales. Gas and brushless. 👊🤘
@@SteelCityRC nice imma look into it man .. Thanks
Thank you ...thank you! A video is so much better than just the manual.
Awesome! I was trying to make it short and sweet so it can be used for quick reference. Appreciate the positive feedback. Check out some of my other videos!!
Thank you!!!!! Your vlog is very clearly to explain how to do it.
Sometimes straight up and to the point is where it's at. Kinda made the video for reference when I am out in the field and want to change a setting. I re-watch this video lol. Appreciate you stopping by 👊 🤘
Definitely a big help, thanks!!!
Awesome! Glad to help. Thanks for stopping by!!
Thank you. This was helpful👍
Absolutely. Glad to help. Appreciate you stopping by 👊 🤘
thanks man! losi SBR 2.0 here and for some reason they decided "Medium" low voltage settings were safe, first run both my batteries had a cell go under 3v. Set it to "High" !
Smart move. I would rather lose a few minutes run time than ruin my expensive lipos an possibly the rig. I am happy with a 3.6 to 3.7 end point per cell. Good info and thanks for stopping by brother 👍
Awesome vid bro. Very easy explaining it
Glad to hear man! I wanted to put something out there that is straight to the point so if somebody needed the info on the fly it would be available. Appreciate you stopping by!!
very good sharing..
Thanks. Glad to help
It helped me...thanks bro
Right on man! Glad to help out 👊🤘
Thanks for this.. the battery wire management had me a little confused too. Haha
Awesome. Glad it helped. I am not one who likes reading books and find videos easier to complete a task. The wire clips are sweet hey. I think the batteries need a strap fron to rear also. Just for a little more support. I am gonna measure the size here soon for that. Appreciate you stopping by man🤘👊
@@SteelCityRC screw the set button bro, use a program card or hook it up to the pc.
so much easier. great car though :)
@@1521joe for someone without a card or pc is why there is a set button lol. I understand there are easier more efficient ways
@@SteelCityRC ahh cmon bro.:)
@@1521joe 😆
Nice vid thanks for running through the program button
Hey thanks! Tried keeping it to the point with minimal babble lmao. Last thing needed is babbling when you are trying to get your ESC set up. Glad to help 👊🤘
Im sure this helps some people out good Job G! ⚡️⚡️⚡️⚡️ That Arma is a great RC!
If people are anything like me. They find it easier to watch a video on how to do something than read it. I wasn't gonna spend $35 to 40 on a program card that I will use once. So I read the book on how to do it manually. Thanks for watching Jeff
Great video!!
Glad to help RC brother! Thanks for stopping by 👊 🤘
Good video bud , easy to follow . Just done mine but went to punch 5 and changed to 25 pinion ... ooowah
She’s movin now 😛
Awesome! It's amazing how much more I like the truck now. On punch 5 with a 23T pinion it rips. Glad the video helped. Appreciate you stopping by 🤘🇺🇸👊
Smaller piñon more torque correct ?
@@mikegarcia2349 yup you got it 👍
That's cool you did this how to cause that manual can be confusing an what yr is your fox body I have a 93 cobra but with a big turbo lsx .otor in it an yes I do have the numbers matching motor
Ya I had to reread that manual five times and still had it in front of me doing the video ahahahah. The Mustang is a plain jane 1987 stock 5.0 5 sp hatch. Love it cos I am not afraid to drive it.. I will go out to eat and leave it etc. No worries. But man. I gotta ask. Why ruin a Cobra to just put a Chevy in it? Something like mine would be less hurtful ahahaha.
Thanks..outcast 8s pumped up now...battery buckle thing had me stumped 🤨🙃
No problem! The battery buckles had me scratching my head also. Finally figured out their intentions for them. Glad to have helped ya out. Appreciate you stopping by 🤘👊
@@SteelCityRC I changed mine out to drone straps, shorter and easier to strap without the buckle thing In The way....amazon helped me out on that one..lol
@@redblue40rc33 good deal. Thanks for sharing bro
Hi mate thanks for this video it helped me out but after I found out I can just use the hobbywing program card after I'd already done it 👍😁
Yeah there are a few ways to make setting adjustments. I made this quick video to specifically show that the SET button could be used fairly easily too. Happy RCing 👊🤘
@@SteelCityRC yeah I programmed it using your video thanks mate 👍😁
Helped alot thank you
Awesome! Glad it helped. Appreciate you stopping by 👊
Is it the same procedure for the kraton 8s blx? Thanks
Yes. The Kraton 8S and Outcast 8S use the same electronics.
@@SteelCityRC thanks for the info.. and if you want to reset it you just hold the set buttong for 5 seconds until it blinks green right? Then everything is in stock factory settings?
@@ronaldcancio6085 that I am not sure of. I would have to find the manual for that answer.
Thanks very helpfull
Awesome 👊🤘
Great!! Thank you 💯
Awesome! Glad to help. Appreciate you stopping by 👊 🤘
Awesome video thank you big time!
Hey Thanks!! So glad to help. Between the punch on 5 and 23T pinion it really helped. Oh and the brakes at 50 percent work good too. Appreciate you stopping by!
That helped me thank you
@@Gilmore757 Awesome! Thanks for watching 👊 🤘
Very helpful thanks sir
Very welcome! Appreciate you stopping by 👊🤘
Thanks so much man
Sweet. Glad to have helped
So I did what you said and all the car wants to just takeoff on its own. Could that be low battery?
I am not sure why adjusting the punch level and brake level would do that. Maybe recalibrate the ESC to the radio, then adjust punch etc. Also make sure no knobs on the radio got bumped. Good luck.
Problem solved thank you
@@Gilmore757 mind sharing what happened? Thanks.
@@SteelCityRC I just recalibrate the ESC and then reprogrammed it and now it’s fine and the controller too
@@SteelCityRC I think I may have bumped the controller is why it was doing that but now it’s not doing it anymore after we reset everything and recalibrated
If I was to put punch setting to 5 with all stock parts would it be ok or should I upgrade first I have the kraton 8s 1/5 scale
It will be fine maxed out on punch. That is how I used mine along with the included 23T pinion. It really made a difference on an Outcast 8S.
I have a firma speed control I'm setting. Mine is for the brushed motor but they program the same from my understanding. I'm programming it for an airboat. It seems slower than the old conductor style. Any way let's just say forward is running at 100% reverse is only at 30 I have a feeling it's confusing the brake feature with reverse so in reverse its not giving me much power only 30% or so instead of 100% reverse so I'm pretty sure I need to program it differently
Hello. It sounds like it needs reprogrammed. I bet that air boat is fun! Appreciate you stopping by 👊
Those red and black wires that run from the ESC fan and plug into that connector into the ESC itself, then it is two more red and black wires that run from that connector into another connector, mine is broken right there from a crash, how am I able to fix that or can I just get a wire harness and connect everything that way?
Hello. If there is enough meat per say to the wire. You can strip back the insulation and solder the wires up with shrinktubing around each wire. If no room maybe contact Horizon Hobby through email or phone for a remedy. Sorry that happened. And if I saw exactly what you mean I could give a better idea what to do. Appreciate you stopping by 👊🤘
How do you like that kraton 8s so far?
What's up man. I have the Outcast 8S. Since putting a 23T pinion and punch 5 it is much much better. Before that. It was lacklustered. Thanks for stopping by.
Hi, can the stock servo S905 handle 8.4V bec?
Good question. Just doing a Google search it states specs for 7.2v. So I am guesing 7.4v would be their max. But if you think about it. A 2S lipo is 8.4v fully charged. Also have to see if the receiver is capable also. Wish I was more help. Thanks for stopping by!!
@@SteelCityRC yess exaxtly saw that too but considering there are just 2 options on the esc 6.0 and 8.4V i would guess it wouldnt kill the servo. Thanks for your reply👍🏼
@@Ruben.vandb1 tell ya what. It fries I will mail you mine. I took it out to use a 5th scale servo
Nice
Thanks!
I see a gt fox body👀👀👀👀. I have a 92gt currently. I can’t leave rcs or mustangs alone lol.
Hey what's up man! Yes it is a fox there. A 1987 5 speed. Love that little car bro. I am totally with you. Mustangs and RC's rule the world lol. Appreciate you stopping by 👊 🤘
Do you know how to turn reverse off?
Hello. I wasn't sure till I looked in the manual. Reverse is not able to turn off and on. Can just turn down the reverse strength. 25% looks to be the lowest. No off choice. Hope that helps!!
Hola cómo puedo bajar el voltaje de corte de las baterías??? Se quedan en 50% ir a tarjeta no tiene la opción.
Do you know how to factory reset the ESC?
That is a good question that I do not have the answer to. I would think you would need the programmer designed for this esc. Maybe in the manual it will have directions to reset? That is where I read how to change settings using the set button. Sorry I am no help... Thanks for stopping by 👊 🤘
@@SteelCityRC It's alright! And I checked the manual and I couldn't find anything on it. It's not that big of a deal.
You don't mess with the Motor timing degree ??
I did not.
So strange that mine will only go up to option 5 and then back to 1??
The 8S ESC? If so I would contact Horizon Hobby about it. Hope ya get it sorted. Thanks for stopping by 👊 🤘
My name is Terry can anyone help me out with my new arrmor Vortech I bought it new ran it a couple of times it lose signal I call Horizon hobby they sent me a new ESC I followed my
Manual and Finally got it to bind throttle now it loose steering what do I do to fix this
Hello. It almost sounds like the receiver is bad. I would talk to Horizon about it over the phone. They can do an over the phone diagnosis with you to find out. Hope you get it figured out soon! Thanks for stopping by 👊 🤘
So I did this but now it won’t go forward and I try and now it won’t go backward pls help me
Do you have the owners manual for this truck? It almost sounds like you need to recalibrate the ESC to the radio. How it would have lost that during parameter adjustments is beyond me.
@@SteelCityRC yes I do I also have the Esc and brushless motor maunel.The truck name is Granite mega550 and both esc and brushless motor are made by spectrum.
@@SteelCityRC I tried switching wires and cabrilating but nothing works
@@rctiprccarvids3080 it worked fine before you made adjustments I assume? Did you go through the calibration procedure in the manual?
@@rctiprccarvids3080 this video was made for the 8S line of Arrma rigs with Spektrum electronics stock. It may be different procedures for your rig. Sorry I'm not more help
How do I connect my remote to my outcast 8s im losing my mind
Sorry man! I am no help there. I put a Futaba radio system in mine. I would search Spektrum DX3 binding if you have that radio in the YT search bar. Good luck👊🤘
my esc have a blinking red light and no throttle
I was just reading in my Outcast 8S manual. It says "LED flashes red with short single pulses --LVC protection activated ". So in real talk. Your batteries have been depleted down to the low voltage cut off. Re balance charge your lipos and try again?
Bro Can I just press the power button instead of doing that?
To get into the settings. I had to use the power button and set button.
YEAH TANKS
So what did you set up now?
Congratulation, with Punch on last Level you officially will strip your gears and burn your motor. but hey thats why we do that right :)
Ahahahaha! Right on man! That was funny. It actually did really well set up like that. Me that can't leave anything alone put a Castle mmx8s and 800kv motor in it. It rips now. But very front heavy. Check it out. Thanks for stopping by and for the chuckle 😄
It did just find it first, and then all of a sudden wanted to takeoff on his own
@Gilmore757 make sure the knobs on the radio didn't get bumped. If not, recalibrate the radio to the ESC and retry punch settings.
Thank you
Sell me that 5.0 stang. Lol
Man I love that car. I couldn't get rid of it. Appreciate you stopping by 👊🤘
Done that on mine still no bloody brakes got myself the ESC progammer but even somone who has 10yrs IT is having trouble getting 2 their software contaced the tech staff even told me what 2 do followed 2 the letter still nothing it i just think they r way 2 heavy & should b fitted with mech brakes in all of them getting a little fedup now enenyone got ideas comment here or manjez.jt@gmail.com thanks
Sorry to hear that. I still wasn't happy with the stock electronics. So I put a Castle mmx8s and 800kv motor. Now it rips! And actually stops. Hope you get it sorted. Thanks for stopping by