BetaFPV ELRS 1W Tx Flight with QX7
HTML-код
- Опубликовано: 8 фев 2025
- BetaFPV ELRS Micro Tx Module Flight with QX7 and Eachine Razor glider.
BetaFPV 1W ELRS module - bit.ly/3snGxwu
BetaFPV ELRS micro receiver 5ch PWM and CRSF serial - bit.ly/3GDjHG6
Like, Subscribe & Ding the 🔔 - bit.ly/ANsubscribe
🔎 More information 🔍
► Newton Airlines Uncut - bit.ly/NewtonAi...
► Newton Airlines blog - newtonairlines....
► Links for my build materials - newtonairlines....
► Andrew Newton RUclips - / andrewnewtonaustralia
► My portal - anewton.net
► My Thingiverse - www.thingivers...
► iNav Basics and FAQs - newtonairlines...
► All my iNav CLI Dump files - bit.ly/2t2OPz7
► Depron Armin Wing build - • Depron wing build
► Skyshark P4X spars - www.kitesandfu...
► GBC EZLOAD laminating film (May be discontinued) - shop.quadient....
► Alternative 75 micron laminating film (not tried by me) - www.boundtoimp...
► Depron and foam board - My 6mm and 3mm depron came from www.tradewarehouse.com.au But from 2020 it seems they no longer sell proper depron. I have not found another supplier yet.
👌🏽Support this channel 👌🏽
This is a fun hobby for me, not a money making venture. I don't have a Patreon account, and choose the minimum possible advertising option. However if you would like to support this channel here are some options -
►Direct donations to Paypal.Me - paypal.me/apne...
►Affiliate links - BANGGOOD RC - bit.ly/3mMnJ93
If you use the affiliate link to make a purchase I may receive a commission at no extra cost to you.
👀 No single review will tell the whole story. Be clever, watch other reviews and shop around before making any purchase.
#AndrewNewton #BetaFPV #ELRS
Thank you for this! From all the other elrs videos I've seen, none have pointed out those limitations, which are vital to know for fixed wing pilots.
Someone is working on a fork to add more than 4 11 bit channels
All the info is on the ELRS website, including all its limitations.
Thanks for taking the time to explain the considerations and tradeoffs that must be appreciated when using ELRS on fixed wings. Was great to watch you fly while explaining details.
Thanks, rapidly learning about ELRS
I would love to fly like that !!!
Good old Razor👍
Nice one Andrew! Glad to see it all running and in the air without issues. 115k baud will limit you max packet rate available (can’t use 500hz rate), but on gliders / wings you don’t need crazy high packet rates anyway, so should be totally fine.
Thanks, I was mostly showing the QX7 requirements.
Thank you for being open minded and giving elrs a try. I am using 2.4g elrs on a Nano Goblin using the Matek Diversity receiver, F411, INav LUA, ect with very good results even in a metro environment. Matek also has CRSF boards that allow adding a GPS, Voltage and current telemetry.
Thanks for the info!
Thank you Andrew you are my go to channel for any rc info and my friends all as the same cheers 👌
Thanks Rob. My aim is to simplify the technical stuff
Looks a great glider
A late post for Melbourne, but a great post none the less :)
Thank you for showing how ELRS can be used for fixed wing and showing a Real Flight with it! I have found by logging into the receiver on WiFi and remapping the Rx's output #5 to a higher ELRS channel, the 7 bit resolution they have work pretty well even with a head tracker. There are a couple of LUA settings that help, ELRS dev Bryan Mayland has some fun youtube videos that show a lot in a little bit on how to get it working adequately. I would really like to hear your impressions of flying a full 5 channel plane with one as you actually fly a lot and don't just talk ;)
Ok, I must try the WiFi and channel remapping
Really nice 👌
Makes me want to put my quads down and dust off the planes. Really enjoyed that and thanks for the breakdown on channel options, I've thought to get a long range set up for a little while but the 1200mw dji hack is working out ok at the moment.
Thanks Nick, I guess you could get some spectacular flowing flights along the shore line. But you're getting amazing shots already
🔥💕👍
How do you mount cameras to your planes? I just got the runcam 2 4k and I don’t know a good way to mount it
Hi Andrew, what's the glider?
Eachine Razor
Are you a South Aussie boy? I've got a 100 acres that I'm planning on flying out of on K.I.
Just getting into FPV and loving your content. 😊👍
Ji Bazza. Just moved over from Geelong in Jan. Loving SA so far
👍🏻
I think EdgeTX gets around the baud rate issue.
Yeap onebit mode
Nice video and nice Glider. What is this glider model?
Eachine Razor
Sweet mate.. Top Nerd stuff as always.. 2m FPV next time...Maybe??
Would love to try fishing below for Lost Planes, Seals and G/Whites!!!!
Do you have an old toothbrush? Ya QX7 needs abitofa clean mate...
Ha, it is a bit grubby!
I installed the same rx in my t1 ranger. Same TX. You say full resolution 1-4 but on all my surfaces the movements seem a little jumpy. Any ideas what to check?
Does it happen with other receivers? Maybe only when the transmitter is close? Cant think of any reason really.
I think I'll just stay with normal cheap 2.4g flysky receiver lol 😆 I'm not going to be flying a mile away as I live in a big city with too much interference
BANGGOOD SENT A REFUND FOR THE 18650 BATTERIES BUT I SEE THE ARE STILL ADVERTISING I WAS ABLE TO BUY FROM RADIO PARTS A YOU SAID I WOULD BE ABLE THANKS
Awesome to see some ExpressLRS on fixed wing content! I was worried about how difficult a jump it is from FrSky's "just bind and fly (assuming same version)" ecosystem but you seem to have picked it up pretty quickly. I'd love to offer my direct support for answering any questions you have, CapnBry on the ELRS discord, or I can get you my email address.
I found it easy with the BetaFPV gear, pretty much just plug and play. Thanks for the offer of help Bryan.
What plane is that mate?
Eachine razor
What plane is that?
In the description
I think your Radiomaster would work better with ELRS Andrew..🤔...Can you not solder the micro ELRS RXs to the Matek Decoder board..?.. The RX / TX pins are in reverse order but you could do it with wire maybe. I use the Matek Decoder PCB with some of my Nano CRSF recievers. Will this give full resolution on 8 channels then?...😳😳🤔🤔.. ELRS is here to stay IMO it will replace all the standard 2.4g systems eventually...😳🤔🇬🇧
Would need to flash this with crsf firmware, otherwise it's a PWM only Rx. The decoder board would give access to all the channels, but wouldn't change the resolution
@@AndrewNewton I don't think you can flash a 2.4g Rx with CRSF firmware Andrew. They must be able to create the Crossfire feature list on 2.4g IMO. They just have to give up some of that rediculous low latency...?....🤔😳😳🇬🇧
Try the ELRS Module in the RM it has a faster baud rate...I pretty sure it can even use the CRSF APP too..🤔
From what I've watched so far on youtube...ELRS is great for quadcopters...particularly 5" and smaller...No way I'd trust it for LR on a wing etc over Crossfire tho.
I live in an extremely noisey environment. (Planet England)...so 868 is the only thing I trust....Sorry.