If you're not getting good enough coverage around the heads this could be because of one of a couple of reasons and a combination of them too. Not enough pressure, not enough flow, or the system was not installed without head-to-head coverage. If your not sure what your specs are, or how to get them please contact a local distributor who can refer a contractor for you to perform an audit for your system. Here is a link to find a distributor: www.hunterindustries.com/distributors-in-north-america.
water pressure can be measured at each end with a gage if needed, pressure issues can result from improper selection of feed pipe diameters used to construct your irrigation network.
You would think there would be a link in the description to the mentioned guide.
Just go to their website.
I have an issue where I don't get enough water within about a 8' radius around the head. Would a lower angle nozzle help?
If you're not getting good enough coverage around the heads this could be because of one of a couple of reasons and a combination of them too.
Not enough pressure, not enough flow, or the system was not installed without head-to-head coverage. If your not sure what your specs are, or how to get them please contact a local distributor who can refer a contractor for you to perform an audit for your system.
Here is a link to find a distributor: www.hunterindustries.com/distributors-in-north-america.
Does anyone know if my irrigation pressure problem could be down to nozzles being too big?
yes, the bigger the nozzle the more pressure you need.
water pressure can be measured at each end with a gage if needed, pressure issues can result from improper selection of feed pipe diameters used to construct your irrigation network.
Do hunter nozzles work with the Orbit voyager II?
Yes they do there are videos on here using just that