Hunter ¾” Inlet Rotors
HTML-код
- Опубликовано: 8 сен 2024
- Hunter has a full range of rotors for any application. They are supplied with a full range of nozzles and they have an extremely low warranty rate.
In this video we will discuss three models of the ¾” inlet rotors. Each are great in their own way, but each have benefits that will make your company more profitable, and it will make your customers happier!
How do I know which inlet to buy ? 3/4 or 1/2 inch ?
Nice!
Thanks for watching!
Hello again I have another question, what are the radius ranges of the blue nozzles, low angle (gray) nozzles, and the red nozzles on the PGP-ADJ?
Good question about radius ranges. Please use the link below to go to the PGP portion of our website. From here select the SPECS tab, and you can scroll down to view those ranges.
www.hunterindustries.com/irrigation-product/rotors/pgp-adj
Hello, I have a question, on the PGP-ADJ what is the difference between the blue nozzles and the red nozzles?
Thanks for your question regarding the Hunter PGP rotors! The round, red nozzles were developed when the PGP-ADJ was created! They are numbered 1-12 and have flow rates from .7 - 11.9 GPM across a wide radius range. They water very evenly and efficiently, but some customers have said they don’t like the way they “look”! To address those concerns we developed the blue nozzles!
The round, blue nozzles are numbered in the approximate flow rate, 1.5 - 8.0 GPM. The radius range is not quite as large, but it’s sufficient for most all landscapes. They too water evenly and efficiently, but they have the “look” of more up-close water near the sprinkler, which many customers prefer.
No matter what nozzle is chosen, you can’t go wrong! Thanks for choosing Hunter products! Please let us know if we can be of additional assistance.