Is it possible to get at the lower screws without fully removing the bumper? I only need to do one side and tempted to try to pull off the bumper only on that side to access the screws. Bad idea?
I also just noticed my driver HL is out, any word on if you have to take off the bumper all the way? I am looking to do it myself...also, I am assuming you have replace the entire unit and not just a headlight it's self right?
Hey! Have you tried replacing the glass on these headlights? I have the same myself, been having moisture issues for a year now. After a lot of work on this, we found that using superglue and activator, with black tape and then clear tape over cracking spots might do the trick. Cracks have appeared on the plastic cover above the headlight and hopefully after this no more moisture/water gets back in there. If this doesn't fix it, and it keeps getting worse, I might try to change the lens, how difficult is this job? From my understanding it doesn't look as complex as changing the glass only, if that was the case, because on this headlight the glass sits inside a plastic cover, so it must be a lot easier to put in place then other headlights that requires you do replace the glass only? Thanks in advance and hope you have any sort of experience with this!
We have removed and replaced the lense. It is not for the faint of heart. I'll have a video detailing everything about that process in the near future.
Hi guys, I have 2016 LED headlights, hit and broke left glass, light been working all beams and turn signal, after replacing glass, the whole headlight doesn't work, tomorrow will check the fuses. Did anyone have answer or had the same situation ?
Hey I need help I just picked up my Audi s4,i need your help as the coolant leak is irrtraceable there are no leaks anywhere if you guys can tell what to do,I’ll tell the issue I store the car overnight there is no coolant leak no visual coolant leaks but if I drive it around 20-30 km it’s tank goes from full like max to minimum.if you guys can help me I’ll be grateful.😢
Watch our video on the common coolant failures/leaks in the 3.0t. I suspect you have a cracked PCV. Check your oil for signs of coolant mixing with your oil. Get this figured out before you drive again.
Is it possible to get at the lower screws without fully removing the bumper? I only need to do one side and tempted to try to pull off the bumper only on that side to access the screws. Bad idea?
Informative video! Guess I won't be saving money by doing it myself 😂
😂😂😂
Great vid! Would love if you can do a front/rear diff fluid change DIY soon
It's on the list. Right now I'm busy getting ready for Alpine Volks Fair.
Is it possible to get at the lower screws without fully removing the bumper? I only need to do one side and tempted to try to pull off the bumper only on that side to access the screws. Bad idea?
I also just noticed my driver HL is out, any word on if you have to take off the bumper all the way? I am looking to do it myself...also, I am assuming you have replace the entire unit and not just a headlight it's self right?
The bumper has to completely come off to get the light out guys.
Forgot the custom works, can he re-seal them when they start getting condensation in them?!?👀
That’s a service the world needs!
The condensation isn't coming from a permaseal failure. I promise lol. Gotta be somewhere else
@@AudiC7Owners aww man. Sounds like a headache for another day
Hey! Have you tried replacing the glass on these headlights? I have the same myself, been having moisture issues for a year now. After a lot of work on this, we found that using superglue and activator, with black tape and then clear tape over cracking spots might do the trick. Cracks have appeared on the plastic cover above the headlight and hopefully after this no more moisture/water gets back in there. If this doesn't fix it, and it keeps getting worse, I might try to change the lens, how difficult is this job? From my understanding it doesn't look as complex as changing the glass only, if that was the case, because on this headlight the glass sits inside a plastic cover, so it must be a lot easier to put in place then other headlights that requires you do replace the glass only? Thanks in advance and hope you have any sort of experience with this!
We have removed and replaced the lense. It is not for the faint of heart. I'll have a video detailing everything about that process in the near future.
@@AudiC7Owners Haha, as expected, it is usually not an easy job, looking forward to a guide!
Anyone have any suggestions for the best place to buy a replacement headlight for a c7 😭
I have the same headlights but the low beam is quite dull can you please do a video on changing bulbs?
If you have the same headlight then you cannot change the bulbs.
@AudiC7Owners What do you do replace the headlight lol 😆
If you have the led lights like mine then yes if they are defective.
Hi guys, I have 2016 LED headlights, hit and broke left glass, light been working all beams and turn signal, after replacing glass, the whole headlight doesn't work, tomorrow will check the fuses. Did anyone have answer or had the same situation ?
Great video!! Keep it up!
🤘🏻🤘🏻🤘🏻
How much will it cost to upgrade to those full led headlights if I have the xenon headlights…it kinda sucks you have to take the bumper off
I think they run around 700$ per headlight used
@@AudiC7OwnersI heard it was 10k to convert
@_yoloonthepopo_6561 that's wild.
@@AudiC7Ownersyeah I mean I don’t know if that’s true but I’m sure it’s not just plug and play
If I remember correctly it is plug & play. You ft have to code the lights with vcds/obd11
But I'm not 100%
Hey! Great video. Has anybody tried installing headligts from china? are they ok?
If you get the Hella brand lights you will be good
Hey I need help I just picked up my Audi s4,i need your help as the coolant leak is irrtraceable there are no leaks anywhere if you guys can tell what to do,I’ll tell the issue I store the car overnight there is no coolant leak no visual coolant leaks but if I drive it around 20-30 km it’s tank goes from full like max to minimum.if you guys can help me I’ll be grateful.😢
Watch our video on the common coolant failures/leaks in the 3.0t.
I suspect you have a cracked PCV. Check your oil for signs of coolant mixing with your oil. Get this figured out before you drive again.
Thank you very much
How do you remove the front bumper
We have a video on that
What modifications are you doing to the headlight?
Secret for now 😉
@@AudiC7Owners probably tinting them
Nope
Will they flash rapidly? Or different colors?
They will be programmable to do almost anything I want
Sup nerdss
Ayyyyy
So the main part is removing the bumper first
Yep
Mine does not look like this at all . .
Not helpful Video This Bumber Remove Already easy to spot the Screws to remove the head lamp Now show me how to remove the bumper first
The only thing not helpful here is your comment.
I specifically tell you to check the video description for a link to our front bumper removal diy.
Is it possible to get at the lower screws without fully removing the bumper? I only need to do one side and tempted to try to pull off the bumper only on that side to access the screws. Bad idea?
Just remove the bumper