How To Form Pool Copings with Z-Poolforms (Easy Money!)
HTML-код
- Опубликовано: 17 фев 2022
- #EverythingAboutConcrete #MikeDayConcrete
How to form pool copings with Z-Poolforms.
How to form and overhang a pool deck coping.
Using Z-Poolforms is an easy way to form the inside edges of new pool deck installations.
This forming system clips onto most types of pools and allows you to use several different types of textured liners.
The liners also come in many shapes for your convenience.
Installation is really quite easy after you learn the system.
This video shows us installing the forms around a vinyl lined pool.
Basically, we snap them into the liner strip and they're ready!
Check them out at www.concretecountertopsulutions.com
LEARN FROM ME - PRIVATE MEMBERSHIP AREA:
www.theconcreteunderground.co...
GARAGE FLOOR EPOXY FLAKE COATING COURSE:
www.theconcreteunderground.co...
MY STAMPED CONCRETE COURSE:
mike-day.mykajabi.com/offers/...
MY CONCRETE SLAB COURSE:
mike-day.mykajabi.com/pl/79570
FOUNDATION CRACK REPAIR COURSE:
mike-day.mykajabi.com/offers/...
GARAGE EPOXY FLOOR COATING COURSE:
mike-day.mykajabi.com/offers/...
VISIT MY WEBSITE:
www.everything-about-concrete...
USE THE SAME TOOLS I DO:
36" MBW POWER TROWEL:
imp.i284638.net/oeRMmn
ScreeDemon Gas Powered Vibratory Screed:
imp.i284638.net/4ZKEL
Screedemon Battery Powered Vibratory Screed:
imp.i284638.net/LzdBo
14' Screed Board for ScreeDemon:
imp.i284638.net/QOPDZM
MARSHALLTOWN SHOCKWAVE VIBRA-SCREED:
amzn.to/2tZ79ti
TOPCON LASER LEVEL:
amzn.to/2VrJ3zV
DEWALT PENCIL VIBRATOR TOOL:
amzn.to/2Km5Zis
INVERTER GENERATOR LIKE WE USE:
amzn.to/2XfWfwe
BULLFLOAT:
amzn.to/2U1Kx2F
HAND FINISHING KNEE BOARDS:
amzn.to/2TZmTUj
MAG FLOAT & STEEL TROWEL SET:
amzn.to/2IgmDOq
2" MARGIN TROWEL:
amzn.to/2G33KNn
CONCRETE PLACER OR KUMALONG:
amzn.to/2I00gxp
CONCRETE FINISHING BROOM:
amzn.to/2UytU2B
CONCRETE SCREED:
amzn.to/2WZxtwm
CONCRETE EDGER:
amzn.to/2GbGkEp
CONCRETE GROOVER:
amzn.to/2PaL414
BOSCH HAMMER DRILL:
amzn.to/31AHnaN
MY RECOMMENDED TOOLS PAGE:
www.everything-about-concrete...
SUBSCRIBE to my email list and get my FREE video guide on how to get the perfect broom finish on a concrete patio:
forms.aweber.com/form/44/2003...
Follow me on Twitter:
/ creteexpert
Follow me on Instagram:
everything_...
Follow my Facebook Page:
/ everythingaboutconcrete - Хобби
Very easy! Nice work Mike!
Thanks Ryan, they really are!
Great work, great content, thank you! Happy Saturday!
A really nice touch and finishing 👌
i love watching mike and how he plans for each job. concrete must be planned and attacked or it will blow up. nice to see you growing. pouring concrete in jan and feb wow cheer mate
Excellent looking quality work 👍,was always curious about that coping, didn't know if tryed straighten it and keep straight after pour but I see now
Everything is easy money for you Mike! Best of the best 👍
Thanks 👍
Love the roller stamp!
looks so good. thank you for sharing
Thank you too
Wow looks absolutely amazing
Thank you
Excelente trabajo 👏 👍 💪
This is very good information for building diy concrete skateboarding ramps 👍
Glad it was helpful!
amazing job mike
Thank you
Beautiful work
Thank you! Cheers!
Excellent job ! Blessings
Thank you! Cheers!
excellent job once again
I appreciate that
Looks sharp Mike, great job!
Thanks Frank, what do you use for forms?
@@MikeDayConcrete We use the same, Z-Poolforms, and occasionally pour up against natural stone.
Nice video!!
Thanks!
looks great
Thanks
I thought this video was going to be a 2 for 1.👍👍✌✌
Haha, not yet!
Nice job.
Thank you Mike!
Very nice
Thanks David!
The big guys knees look shot.
He's tough, he'll be all right!
Nice 👍
Thanks ✌
Is it important to seal a concrete pool deck in a southern climate? The Z forms are easy to use. Concrete contractors in my area did not know these Z forms existed. I bought them for my free form pool, installed them around d the pool, and at the edge of Keystone blocks. 3/4 of the pool is out of the ground, and I have a bar area at one end radius of the pool. Keystone block steps, retaining walls all have the Z form edges. Great product to use. Your crew does great work. Awesome
That's nice to hear, glad you like them. Thanks
Would it be possible to do a bit of a guide on cutting concrete to prevent cracking? Different methods, how many cuts to make and where and how deep? How the thickness of the concrete affects this also… Would be a great help.
Pools in Maine open in February? Haha... You go buddy...
We're having a heat wave.
I like your videos. I've seen a lot of them on poring concrete and enjoyed this immensely because its about poring around a pool. Wouldn't knee pads be safer?
Knee pads are always a safe and great idea. But they're uncomfortable as hell.. I don't care what type you buy, they're all uncomfortable.
Thanks for watching!
How do you patch holes and pits in the face edge after pulling forms
Hello Mr Day from Mid Hudson Valley NYS. Novice DIYr. Been tracking you for sometime and tried re small scale projects with your tips and advice. Thank you
In this video I noticed 04183+right+stair+return+panel on the edging of the pool deck. My in ground pool 2nd hand ( brought with house and installed 1972 is missing those panels completely all the way around. Yeah that would be a “ah sht” moment
Hahahaha!
Question I have is how are they mounted and what screws did you use?
Also are they actually wood and do they need to be sealed ?
The present copping is loose,cracked ready to be replaced.
Apologies for such a long comment. Any response would be great. Keep on with the great vids thank you for posting.
Much more success to you and God bless!
Do you need to spray liquid release when using the roller?
What do you do if you are doing 90 degree corners?
How do you replace a broken track once the coping is installed ?
A lot of Labor I do all that prep by myself, I need to replace them there become brittle.
How do you lay the rebar?
How are they gonna replace the pool liner now?
My boss always moaned at me for cutting plastic with a diamond blade 😁
Haha, not me. It's easy!
I don’t like paying for a diamond 💎 I can’t wear.
Do you ever get blow outs using these forms?
What percentage of fall do you give it ? Or is it level?
We slope it about 2% usually.
Try using heat for the corner peace’s
Where are you guys located? Id hire you in a second
We're from Maine!
Where’s you bonding wire?
👍🏽👍🏽
Nice we do a lot of that work in New Hampshire and all over Massachusetts but we use Stegmeier cantilever the styrofoam ones looks great and it is easy money 💰👍🏽
I've used those too. I prefer these. Thanks and hope you have a good year!
We use styrofoam for the same application.
Have you tried these Kenny? I used styrofoam before I used these, I think the Z-poolforms are much easier to use.
😳😳😳👌👍
Thank you
Knee pads lol,my grandfather called them San Francisco slippas
Very interesting video and always Great job. Please have your crew use knee pads. They will appreciate it years from now.
Thank you, I will
This video is 5x longer than it needs to be
Can't come up with your own slogan?? Smh