Check your threshold value, when use analog output. And adjust the sensitivity by rotating the preset knob, when use digital output. And also check the Proteus support MQ2 gas sensor properly.
1 Breadboard 1 flame sensor 1 MQ2 smoke sensor jumper wire (Male to Male similarly M to F ) led's arduino uno programming cable Buzzer this is all you need
I already gave the required instrument list in the description. 1. Arduino Uno × 1 2.MQ-2 Gas & Smoke Sensor × 1 3. Flame Sensor × 1 4. LED and resistor kit × 1 5. Buzzer ×2 6. Breadboard × 1 7. Jumper wires kit × 1 8. USB cable type A/B × 1
Wow! That's good. You are creative thinker. I didn't work on the idea. But this idea is good. You can try it using GSM module. Let me know after finishing your creative project 😃.
@@arduinopoint001 i make same project follow the video and make this but code time i use code and upload then code is uploaded but in arduino yellow light not and always red .... and i use arduino uno gital
Are you using an active buzzer or a passive buzzer?
why the gas sensor isn't detect, ledred1 and buzzer1 didn't work?
I do simulation using proteus
Check your threshold value, when use analog output. And adjust the sensitivity by rotating the preset knob, when use digital output.
And also check the Proteus support MQ2 gas sensor properly.
Code is not Working Properly , i Checked all the Connections thrice Flame Sensor , Mq2 , LEDs , Buzzers
how can i adjust the value of the gas sensor threshhold so the buzzer and led will react when the MQ2 led is on?
Can u please say that y u have set flamesensor =low though u have got flamepin value=1 in serial monitoe
Its work with esp8366 module? Not included arduino uno
Yes. But you need to modify the code.
how to make the connections with nodemcu ??
Hi can the same code used for esp32?
Can i use arduino wemos d1r2??
Please how could I know all the material needed for the project u just did.
1 Breadboard
1 flame sensor
1 MQ2 smoke sensor
jumper wire (Male to Male similarly M to F )
led's
arduino uno
programming cable
Buzzer
this is all you need
I already gave the required instrument list in the description.
1. Arduino Uno × 1
2.MQ-2 Gas & Smoke Sensor × 1
3. Flame Sensor × 1
4. LED and resistor kit × 1
5. Buzzer ×2
6. Breadboard × 1
7. Jumper wires kit × 1
8. USB cable type A/B × 1
how will you add an sms alert on this one
Wow! That's good. You are creative thinker. I didn't work on the idea. But this idea is good. You can try it using GSM module.
Let me know after finishing your creative project 😃.
Bro can the power give to this model by charger
Yes )no
Yes, you can.
@@arduinopoint001 thanks bro
Great project bro 👍
Thanks for your compliment, Bro 😍😍😍. It makes my day 😃😃😃.
How to connect sms for Arduino to breadboard?
Brother, code link is not working. Please help us to get the code
It's working.
Why my gaspinvalue is too low it is on 35 how to make higher
Rotate the potentiometer to adjust the alarm on-off level.
Hi why the gas sensors can't detect?
Plss help me🥲
The gas sensor is not working
i have done same as your but my led doesnt turn on can you help
Can we connect gsm sim800L module in it
And Lcd 16x2
Yes, you can. But you need to change the code according to the gsm module and LCD.
@@arduinopoint001 can you help me, can you share code for it hmm
Explanation good
Thanks for your compliment 😃😃😃.
CAN I GET THE CODE FOR THIS PROGRAM?
Code link is provided in the description.
@@arduinopoint001 it shows sites can't be reached it doesn't open.
@@diabolsensei No it's available.
Could you please upload the code. Its not accessible
Now it's accessable.
Hello sir I have a question
Please sensor gas and sensor dht11 with arduino uno
hello i have question
Yes, you can ask the questions. What are the questions?
@@arduinopoint001 i make same project follow the video and make this but code time i use code and upload then code is uploaded but in arduino yellow light not and always red .... and i use arduino uno gital
Did Arduino code successfully uploaded?
The code is showing error please help me
nice
Glad you like it 🥳
Reply bro
Brother, code link is not working. Please help us to get the code
It's working.
Hello sir I have a question