Arduino with Fire Sensor, LED and Buzzer (Tutorial)
HTML-код
- Опубликовано: 10 сен 2024
- Materials required:
1. An arduino with its adapter
2. A bread board
3. A fire sensor
4. A LED
5. A buzzer
6. Jumper wires
7. A lighter
Hope this is helpful.
Check out the code here: kandrproject.b...
Thanks alot sir
With the help of your vedio we had successfully completed our project sir
My buzzer aint working, how would u do it?
Hello my buzzer is not working can you help me please ?
Wow! what ideas people have.I am really touched
Bro love you! You explained it in a easier way. I've chosen this for our model competition. I haven't tried it out, but it will surely work!
It work's
@@ravishraja5843mine is not working led is glowing without any flame
id did s you told but the bizzer keeps buzzng even if thre is not flame why ? please help
nice bro ,,best video for making a flame sensor project with arduino in less time
My friend it is done with arduino nano
?
thank you , i made it
i use D0 instead of A0 and worked fine
dude pls respond, how do you change the sensor from analog to digital? my flame sensor doesn't have A0 output
How plsss?
Can you explain it in description because I was doing this project for science expo
Brother, how can i modify my code, if i want SERVO as output! Can you please Send me the code for that?!
It really works, nice video
I tested it, and it worked but the sensor also detect sun light. why?
Can i use 3 pins flame sensor but there is no AO pin
hey tysm for this project i am really very happy
Bro in my flame sensor there is no AO pin. There is only DO pin. And the bulb is continuously glowing.
On which platform you are using the code please tell and please share the code
Arduino with Fire Sensor, LED and Buzzer (Code)
on January 22, 2018
Arduino with Fire Sensor, LED and Buzzer
Hello everyone! Today I will show you how to use a fire sensor with arduino. The required kits are :
An arduino and its adapterFew jumper WiresA fire sensorA ledA breadboardA buzzerA lighterThere are 4 pins on the digital sound sensor. They are :AO-Analog pinGND-Ground pinVCC-positive power pinDO-digital output pinThere are two legs on a LED. The longer leg is positive and the shorter leg is negative. A buzzer has similar legs. The steps to setup hardware are listed below:Connect "VCC" pin of the sensor to 5V pin on the arduino.Connect "GND" ground pin to GND pin on the arduino.Connect "AO" analog output pin to any analog or digital pins on the arduino.In this tutorial I connected it with A2Connect longer LED leg to pin 13 on the arduino. If you want to use anyother pin on the arduino, you need to use a 220 ohm resistor.Connect shorter LED leg to GND pin on the arduino.FIx buzzer on the breadboard.Connect longer buzzer leg to pin 11(or any other pin) on the arduino.Connect shorter buzzer leg to GND pin on the arduino.The setup is complete. Now, upload the code and enjoy.
Check out the tutorial
const int ledpin=13; // ledpin,flamepin and buzpin are not changed throughout the process
const int flamepin=A2;
const int buzpin=11;
const int threshold=200;// sets threshold value for flame sensor
int flamesensvalue=0; // initialize flamesensor reading
void setup() {
Serial.begin(9600);
pinMode(ledpin,OUTPUT);
pinMode(flamepin,INPUT);
pinMode(buzpin,OUTPUT);
}
void loop() {
flamesensvalue=analogRead(flamepin); // reads analog data from flame sensor
if (flamesensvalue
Good work guys 👍Proud of you brothers !!
thank you bro.
@@krproject8917 my buzzer is not making any voice any suggestions?
I did same as i follow u. But when i connect the arduino to the pc, the led start glowing
Hey, you must connect the led positive for a digital pin
@@firewallhackers-coolguy7416 hey my buzzer is not working could u guide me?
Nice brother. I want to do this as my mini project.
Sir, there was error in the code.... Please solve it once and inform ..... Please
What type of jumper wires did you use?
how to add a gas and flame sensor to a sketch?
did you use 5 volt buzzer?
Bro there is only D0 pin ,not A0 pin
help me for code plz
So the project is very ice also the cost is low so Students can easily get over it.But can anyone suggest me the futher modifications of this project which may help us to make our project unique.
the bad thing about this sensor may give you wrong alarm when one use remote control , since it use IR in receieving signal
What if there is no ao?
Bro Can I Use Big Buzzar
hello brother im also doing the same project work but where i get trouble is, how to run the arduino program. what is the code that we give to the Arduino, how data can be collected, what kind of graph can be obtained after doing this. please would u elaborate it for me plz.
Amazing
Thankyouuuuuuuuuuuuuuuuuuuuuu brother
There is no using ISIS in this program?
Thanks sir.. 😘
Jhakkaas👍👌
Thanks!!!!
bro Im no longer to use the ISIS or Need to use?
ISIS?
can you teach the code if i use Do instead of Ao? Thanks!
❤
Can we use DO instead of AO
You have to change the code.
can you teach what will i change? please i really nees your help Thaanks!
nice one
dami xa bro
What is ur home page on Google
kandrproject.blogspot.com/
Diagram plsss
4:55
What I f there's no so?
Thankyou so much.. can you please also upload the circuit diagram??
4:55
hope it helps
@@krproject8917 does fire sensor sense sunlight too.
Sir pls upload the program clearly again.. Pls sir this is sincere request
kandrproject.blogspot.com/2018/01/arduino-with-fire-sensor-led-and-buzzer.html
kandrproject.blogspot.com/2018/01/arduino-with-fire-sensor-led-and-buzzer.html
Use a lcd, and do another video bro
bro u should add the codding link
Check description bro.
Bro use the screen recording software to record the pc screen like OBS it will be easy for us to read the code ..Anyway Nice One!!
thanks mate. We will definitely use that in our upcoming videos. Keep supporting us.
🌍🌍🌍🌍
I liked the video, but i have a doubt can i make the project if the flame sensor has 3 pins instead of 4 pin @krproject8917