I drove this car on Driftweek 7, which involved 4k miles of street and highway driving and 7 track days in my case. The system is very street-able. I drove with this in the snow on that trip with no issues.
I put same system on my E36 but pedal is way low due to metal L for brake switch. Did you have problem with that and how brake pedal sits compare to gas and clutch pedals ? Also I bled the system 5 times but pedal is still soft first inch or two and onlt than becomes firm and brakes .
Perfect install! Very informative and easy to follow!
Thank you! Amazing products make for easy installs!
Great video 👍🏼 Did you bench bleed your master cylinder or did you just add fluid and bleed the brakes traditionally at each corner?
@@InnovativeAutohaus We did bench bleed it, unfortunately we were all very tired as we built the entire car that weekend that it was not filmed.
Have u driven it yet? Hows the pedal effort feel? Would u say its dailyable and have u driven in the rain?
I drove this car on Driftweek 7, which involved 4k miles of street and highway driving and 7 track days in my case. The system is very street-able. I drove with this in the snow on that trip with no issues.
Did you have to cut the rod? Do you have any photos? 7:17
Yes I did have to shorten it. I did not get a chance to document it but about half the length of the rod and nut.
I put same system on my E36 but pedal is way low due to metal L for brake switch. Did you have problem with that and how brake pedal sits compare to gas and clutch pedals ? Also I bled the system 5 times but pedal is still soft first inch or two and onlt than becomes firm and brakes .
I did not have an issue with that it sounds like the rod is setup incorrectly.
Did you have issues with leaks? I purchased the same kit and have leaks from all the chasebays fittings.
I do not have any leaks what so ever. I did drift week which consisted of 4k highway miles and 9 track days zero leaks. Have you contacted support?