Oliver Röhler explains the basics of wrapping with self-adhesive films: the different types of films, surface preparation, etc. www.hexis-graphics.com/ www.hexis-formations.com/
Terrible teaching here! At the 9 minute mark he lays the vinyl down and stretches the bottom half down over the curved fender using Heat, but He never applies pressure or attaches the vinyl over the recessed area at the top between the curved fender and the hood. And I have not seen a video yet from anyone who uses heat like that where it is not needed. He held the vinyl out away from the fender and heated up the whole piece before laying or stretching it down over the fender and that heat was not needed at all. Might want to do this video lesson all over again just maybe!!
This is sorta painful to watch. I don't agree with the techniques used here. You can anchor one corner and pull all the liner off in one shot from underneath the vinyl. Once the liner is off you can pull glass, pulling in triangles using cold stretching with no heat, then get to squeegeeing. Hook any corners then hit it with heat to slightly shrink and relax vinyl. Take care of your edges, nice proper cuts and then seal the deal, done, less than 15 minutes and no over stretching!!!
Awesome! I have to do something similar to this today and this video helped. Thank you for posting!
Beautiful Hexis films!
Very good demo. Thanks so much! Keep up the great work!
thank you sir
very good
Como se llama el vinilo que no deja bulbujas???
This is a really good video! Subb'd
What type of vinyl?
Where can I buy this film?
Where can i buy your wraps within mainland EU?
nice
hexis colors are the most beautiful in the market but when it comes to installation it is the hardest.
Why do you say this? Have you tried them all or most of them? What is it that is difficult with Hexis? Thanks for any info you can share!
"absorbent paper" - 4:30
Toll.....deutsches video mit lauterer englischer Synchronisation.........sehr hiflsreich
man sollte vlt auch nen deutsches Video hochladen;)
ruclips.net/video/YoeTRISctDY/видео.html
Terrible teaching here! At the 9 minute mark he lays the vinyl down and stretches the bottom half down over the curved fender using Heat, but He never applies pressure or attaches the vinyl over the recessed area at the top between the curved fender and the hood. And I have not seen a video yet from anyone who uses heat like that where it is not needed. He held the vinyl out away from the fender and heated up the whole piece before laying or stretching it down over the fender and that heat was not needed at all. Might want to do this video lesson all over again just maybe!!
2QUICK shit job.
le marque de vynil hexis et fassile posé je vynil les ensegne paunneaux et decoration de voitue
This is sorta painful to watch. I don't agree with the techniques used here. You can anchor one corner and pull all the liner off in one shot from underneath the vinyl. Once the liner is off you can pull glass, pulling in triangles using cold stretching with no heat, then get to squeegeeing. Hook any corners then hit it with heat to slightly shrink and relax vinyl. Take care of your edges, nice proper cuts and then seal the deal, done, less than 15 minutes and no over stretching!!!
würde mich auch interessieren
Leave it to me.i'll gonna sure you guys it would be fast the installation and perfect installed..
Fix your guys audio levels
Karan Sehgal Vlogs ke waha se kaun kaun aya
Terrible!