Absolutely fantastic video, you've taken my anxiety away i can confidentially now attempt to do this mod to my switch. Thank you for the video not many out there for this chip on the V1!!
Nah, I'm not giving someone RANDOM $10 to steal my device. This was a beautiful job from a legitimate company My OLED is working flawlessly, running Android, and it's now a unique item for my collection. Money isn't an issue and neither is my experience with soldering, or modding. I buy my games and value my investments so I sided with an experienced hand with microsoldering for my OLED
Wayayeo, what temperature are u using for those sp1 and sp2 points? I'll use 183° solder, but I'm not sure what temperature to use with the soldering iron
Hola, yo he puesto varios chips y hago trabajos de soldadura microelectrónica y uso 300 grados para evitar mala soldadura o soldadura fría pero solo se toca el componente no se deja puesto para evitar levantarlo o quemarlo
I just tried my first attempt last night and, unfortunately am not seeing the "No SD card screen". The Pico was flashed, however when I plug it into the switch and try to start up, it flashes blue then continuously flashes yellowish green then shuts off, but no life on the screen. If I plug everything as it was originally, it boots normal. So is there something wrong with the programming?
I figured id post my review for this guy's service work. He installed rp2040 to my oled switch this past weekend, and got it back this past thursday. Works insanely well, and the guy did a great job keeping everything clean! I also like hte fact I can still see the light blinking on the chip, that lets me know that its working etc. Loving my switch oled! Thank you for installing it for me! guy is totally legit, and I recomend this guy to anyone!
@@Wayayeo thank you 🙏 do you know where I can find this exact same flex cable version? I searched on aliexpress but can't find it... I only found the rp2040 zero chip version. thank's
@@dumahaldemaduma Might be a little late, but mine did not come with a firmware installed. Install the little USB-C Breakout board, connect to PC and drag on the fw_2.73.uf2 firmware. Just had the exact same problem as you and that fixed it.
Buenas tardes, Segui todo el procedimiento, el unico detalle en mi NS es que funciona perfecto en modo atmosphere, pero no entra en modo original o de stock, el leido que es por falta de resistencias en el chip, sera cierto..? Saludos
Do you know what supplier had the issue with the oled chips I got a few oled hwyfly with the v3 flex so I was wondering if that’s the one that had the issue!
I've done a lot of V2's. Basicly never did a V1 but to me they look the same. The chip, aka the connector from the cpu to the chip is a tiny touch different, but basicly the same steps. If you wver solded something small, it shouldn't be hard to do, still, be careful to not damage the cpu...
You’ll need to find a capacitor replacement/donor. Clean the area, prepare with new solder and carefully solder back in place. Look my other videos. Im sure I did this before. Good luck
@@Entity303ITA As far as I remember, if the chip is flashed and it glitches the console, a green light will turn on on the chip (not sure because my chip is still on its way to me)
@@Wayayeono se preocupe estimado vi in video de un portugués xD y ya pude instalar mi chip en mi Nintendo V2, igual este video me ayudó para orientarme
Absolutely fantastic video, you've taken my anxiety away i can confidentially now attempt to do this mod to my switch. Thank you for the video not many out there for this chip on the V1!!
I’m very glad. Good luck on your install.
Did you succeed?
Por fin regresa maestro 🙏🏽
Saludos amigo. Gracias por el apoyo.
Shipped over an OLED today. You're welcome to make a video with it!
Nah do yourself . Hope these guys don't charge more than $10 -$20 to install these. Maybe $30 for oled ..max!
@@jrok96 nah 30$ is too much in fact that you must destroy half of your console just to put this chip in
Much appreciated. Thank you.
Nah, I'm not giving someone RANDOM $10 to steal my device. This was a beautiful job from a legitimate company
My OLED is working flawlessly, running Android, and it's now a unique item for my collection. Money isn't an issue and neither is my experience with soldering, or modding. I buy my games and value my investments so I sided with an experienced hand with microsoldering for my OLED
Thank you for the support. Rest assured you’re in good hands.
Do you share rp2040 firmware?
Wayayeo, what temperature are u using for those sp1 and sp2 points?
I'll use 183° solder, but I'm not sure what temperature to use with the soldering iron
I would also like to know the ideal temperature of the soldering iron that was used
Hola, yo he puesto varios chips y hago trabajos de soldadura microelectrónica y uso 300 grados para evitar mala soldadura o soldadura fría pero solo se toca el componente no se deja puesto para evitar levantarlo o quemarlo
Hello My friend. Nice video. Quick question, what microscope/camera/lens/ are you using ? It looks very good.
Thanks
Microscope is Eakins. Camera is
a.aliexpress.com/_mMe65Qe
I just tried my first attempt last night and, unfortunately am not seeing the "No SD card screen". The Pico was flashed, however when I plug it into the switch and try to start up, it flashes blue then continuously flashes yellowish green then shuts off, but no life on the screen. If I plug everything as it was originally, it boots normal. So is there something wrong with the programming?
I think the bridge across the capaicotr was bad, mine failed last week and this time I'm buying 63 37 tin lead solder so hopefully it goes well
I figured id post my review for this guy's service work. He installed rp2040 to my oled switch this past weekend, and got it back this past thursday. Works insanely well, and the guy did a great job keeping everything clean! I also like hte fact I can still see the light blinking on the chip, that lets me know that its working etc. Loving my switch oled! Thank you for installing it for me! guy is totally legit, and I recomend this guy to anyone!
Hi :) is it the exactly same procedure for the v2 version? Thank you 🙏
Yes. Good luck on your install
@@Wayayeo thank you 🙏 do you know where I can find this exact same flex cable version? I searched on aliexpress but can't find it... I only found the rp2040 zero chip version. thank's
@cavidoman Sellers usually change names. Find anyone selling the chips and message them.
¿Puedes indicarnos que equipo utilizas para la soldadura y que temperatura debe tener el soldador?.
Gracias
Muy buenos días amigó. Te recomiendo un SUGON para soldar y de temperatura depende que tipo de soldadura utilizas. Comienza con 700 f Suerte.
I’m trying this exact chip and I’m not getting any leds on the 2040. Do you know of a way to test the flex cable after install?
Check you voltage cable.
Did you solved your Problem? I got the same.
@@dumahaldemaduma Might be a little late, but mine did not come with a firmware installed. Install the little USB-C Breakout board, connect to PC and drag on the fw_2.73.uf2 firmware. Just had the exact same problem as you and that fixed it.
What temp was your soldering iron at?
I keep mine around 275~285C
640 f.
Buenas tardes, Segui todo el procedimiento, el unico detalle en mi NS es que funciona perfecto en modo atmosphere, pero no entra en modo original o de stock, el leido que es por falta de resistencias en el chip, sera cierto..? Saludos
Si es probable. Revisa que no tengas ningún punto del chip en corto
Is the installation method the same for the lite version?
It’s very similar but not the same. See my other videos I believe I made one for the lite.
Do you know what supplier had the issue with the oled chips I got a few oled hwyfly with the v3 flex so I was wondering if that’s the one that had the issue!
Rp2040 hwyfly!
Supplier goes by the name of “New Chip Store” and It was the V3 flex cables. I got replacement but I had to place another order.
@@Franrumusicokay thank you!
Great video! Is the v2 install different than v1 or exactly same?
Flex in cpu might be slightly different but soldering is the same.
I've done a lot of V2's. Basicly never did a V1 but to me they look the same. The chip, aka the connector from the cpu to the chip is a tiny touch different, but basicly the same steps. If you wver solded something small, it shouldn't be hard to do, still, be careful to not damage the cpu...
Hello, I have a 2018 Mariko Switch and it is supposed to be V1, but my question is if it really is v1.1 to use the V2 flex or if it is simply v1
If the cable aligns with the caps on cpu then you’re good.
hi, I'm broke two capacitor while solder at video @6:20. my nintendo still work in original. how do i solder it sir? that capacitor was broken
You’ll need to find a capacitor replacement/donor. Clean the area, prepare with new solder and carefully solder back in place. Look my other videos. Im sure I did this before. Good luck
@@Wayayeo someone told we that APU capacitor is just a filter capacitor. they said can solder without that capacitor. it is true?
Do you have a link for the 2040 cable please..
Where did you get your flux from also do you have an updated link for V2
You can purchase the flux on EBay.
Consulta, sirve para la Nintendo del 2019 v2 y que programa instalo a la sd o ya esta programada para descargar juegos?
Si funciona.
@@Wayayeo holaa, ya hace dos semanas la chipie con el chip RP 2040, bua una maravilla poder jugar los juegosas recién xD como el mortal Kombat 1
do i need to flash picofly or it's flashed from the factory?
The one installed in the video is preflashed.
@@WayayeoHow can I see if the chip firmware is already flashed or not?
@@Entity303ITA As far as I remember, if the chip is flashed and it glitches the console, a green light will turn on on the chip (not sure because my chip is still on its way to me)
@@L1te Thanks for letting me know 👍🏻
great video, can you share a guide of what to do after the mod installation on the software side, i am a bit lost... thx
Thank you for the input.
Como se flashea ese chip? como el picofly normal? y que version del firmware de picofly recomiendas?
El chip ya viene listo.
@@Wayayeo en mi caso lo compre y no viene con el firmware por eso me interesa saber si se flashes igual que el rp2040 con los mismos archivos
Does this work with version 2 of the switch?
Yes
Your video's are great 👍👍
Thank you. Your input is much appreciated. More coming soon. Wayayeo.org
Hermano, con este chip se puede entrar al sistema original y al hack? o solo funcionaria el hack?
does it work on the nintendo switch first generation?
Yes
where to buy ?
Funciona este chip con una V2??
Si. Solo asegúrate de tener el flex cable correcto.
Si
Can you link me for the brush?
It’s a soft bristle bamboo toothbrush 🪥. Got it at a organic health store. I’m sure Amazon has some though.
thanks bro , so do you have the firmware ? thanks best regards
Tienes el vídeo en español?
Tengo otro en español en mi canal pero quizá sea diferente el chip. Tratare de subir uno.
@@Wayayeono se preocupe estimado vi in video de un portugués xD y ya pude instalar mi chip en mi Nintendo V2, igual este video me ayudó para orientarme
Im ordering the stuff i need to do this now
Take your time in the install and you should be fine.