very nice and beautiful all of them ! BUT, me and I think many people do not use SMD prints!!! Also in addition, you do not win that much with SMD and making it smaller . (of course it does in terms of weight! on the other hand you make it harder to copy, and so.... to follow you!) by using SMD instead of normal parts, it is no longer possible for many hobbyists to follow you!!!??? think about it! ;-) good luck with your videos!, bye! Rob.
These are all great projects and great exposure for your sponsor JLPCB. I wasn't aware that you could get PCBs manufactured and shipped with just a Gerber file upload. I thought there would be a lot of phone calls and proprietary (expensive) software necessary and it would take months ! JLPCB provides free software and 2 day turnaround...you should mention all these points in your video. I don'tknow how to solder SMD components...looks scary and difficult. You meed to do basic videos on things like - how to solder SMD resistors and then videos on those flat IC packages with pins on all 4 sides and so on....your latest videos are probably too advanced and scary for noobs like me.
I like mini soldering iron with temperature controled.What is the power rating for it? 5 watt or less? Is it possible to get iron from market? N.M.Vadiya,Mahuva.. India
Hi l recently upgraded my laptop to Windows 7ultimate. Problem is I cannot load Arduino drivers since in the device manager, the ports and lot does not appear. How do I sort out this?
I would try re-installing the FDTI drivers from here www.ftdichip.com/Drivers/VCP.htm Do this with the arduino (or any other unnecessary device) disconnected -Restart the PC and then go to your devices manager and check if there are any flagged in red or yellow and reinnstall them manuallt from the folder you've downloaded (by browsing from that window). Then it should work. just select the right COM
@@ELECTRONOOBS, excellent video, if there's ever drone weight lifting competition you could do some damage , If someone had a cheap simple drone controller and body(everything included) then clipped the wires to the cheap drone motors what would it take to wire the cheap drone body without the motors on a homemade drone with large motors? for the relay and controlling the motors?
@@ELECTRONOOBS , to increase the range of a drone not using satellites, say the drone carried a few relays that could be deployed when coming close to become out of range of the controller then a relay could dropped with a helium airbag parachute or maybe a miniature drone combined with helium to keep position is this possible?
I see that you use ESP8266 and I am new to esp. I want just to program the ESP8266 with my android phone and a OTG cable because I don't have any pc. Can you please help me? Or somebody?
Hello I am greatly inspired by your smart watch project I created the same (without PCB) with seperate components I uploaded the simple watch code (took 89%) then I modified it and removed watchen logo and show logo mode and add temperature ( took 91% ) I want to get notifications on my watch but I'm unable to do so can you make a code which will display real time notifications if you remove the notification menu it will require less storage I meant when someone is calling the watch will display " incoming" just like simple realtime notification output.Link of my updated code:drive.google.com/file/d/1YkS7aMowXsO-SleAOqBymv1klsGs984f/view?usp=sharing
23% only, because only thing you do is to advertise your products, instead of doing something interesting for the audiense, like to show something get fixed or designed or something simple without MCU. Microcontrollers are boring and i don't see electronics in programming, its just flash USB memory (one chip on board and nothing else to see), a soulless typing and completely different thing. Show some CMOS or TTL logic or analog implement or combination of them all. Teach audiense something real if you think you are good in electronics. Many channels falls down into the deep rabit hole with those stupid MCU's. Be more creative.
Follow me on FACEBOOK for more: facebook.com/Electronoobs
help me on Patreon: www.patreon.com/ELECTRONOOBS
Hey bro can you do a video about speaker: how to remove humming and buzzing from speakers thx
very nice and beautiful all of them
!
BUT, me and I think many people do not use SMD prints!!!
Also in addition, you do not win that much with SMD and making it smaller
.
(of course it does in terms of weight! on the other hand you make it harder to copy, and so.... to follow you!)
by using SMD instead of normal parts, it is no longer possible for many hobbyists to follow you!!!???
think about it! ;-)
good luck with your videos!, bye!
Rob.
Love this
Pleaae make a update video on the brushed arduino drone
Why are you not using flux? Your solder joints are jagged
pcb is one of the coolest things you can play with and I love it so muchhhhhhhhhhhhhh
A lot of good projects.
Keep the good work.
These are all great projects and great exposure for your sponsor JLPCB. I wasn't aware that you could get PCBs manufactured and shipped with just a Gerber file upload. I thought there would be a lot of phone calls and proprietary (expensive) software necessary and it would take months !
JLPCB provides free software and 2 day turnaround...you should mention all these points in your video.
I don'tknow how to solder SMD components...looks scary and difficult.
You meed to do basic videos on things like - how to solder SMD resistors and then videos on those flat IC packages with pins on all 4 sides and so on....your latest videos are probably too advanced and scary for noobs like me.
You should make a BEC as well
Could you add a header for sensored motors to the esc, so that it can be used in sensored and sensorless mode.
All the projects were very useful. A great summary of your work.
Thank you. I'm glad you like it.
Please make video on how to make a Tesla coil
Can you make a position controlled ESC for brushless motors ?
Talking of PCBs... I love your background!
That's an impressive list of projects
Can you make a video on how to make a PCB file.
Can you have look at my channel pls I am your fan !!!!
Awesome projects, dude! 😊
WOW! This is amazing! Thank you for sharing. Where do I find more information? I am interested in doing all of this setup. The controllers look great.
please dont change the camera setting so often, it is very annoying especially in the beginning! So ugly, but your content quality is very great!
You are doing better than Great Scott..... Keep it up... 👍
Can you make Bluetooth modules
What are the values of the resistors of the rtc module of the smartwatch?
Is all PCB's are PTH type
Do you sell any of your designs? Im looking for a final school project that includes bot smt, tht, wires..its a electromechanical final project...
Una pregunta en la página también tienen servicio de montado ellos te pueden ensamblar los componentes de la pcb
if there was a channel named "ELECROBOOBS" I still loved your more :)))
can you tell me how do you manage to connect all the wires on the pcb when you want the size of it to be minimum ?
I'm one of the guy in your 23% subscribers
Thank you so much!
In your pcb's charging section you have mentioned IC TP4056, but you have used DS1307Z which is a rtc....what are you trying to prove here???
I watched your all videos an some 2 times good videos
I like mini soldering iron with temperature controled.What is the power rating for it? 5 watt or less? Is it possible to get iron from market?
N.M.Vadiya,Mahuva..
India
Are you using Kicad?
>a lot of people already built this project and had "more or less good results"
count me in.
Great projects! Which software are you using to analyse your drone's axis etc? Thanks
Thanks for your efforts in 2018.
Please make a transmitter with display
tell me how to design and order 3d printed case
i want to get pcb's from jlcpcb but i can't get it in pakistan
Very sorry to hear that, I hope you can get the stuff to make your own, at least that would be better than nothing.
Hey #electronoobs......I am into a project where I need to design a wearable band....can you assist me??...please?
This guy is just amazing.
Make a Smart Glasses.Sir
i like your work
Make a 3D pen, following the soldering iron project.
How can I make human drone bored
For his arduino custom, he says he uses the nrf alot but he hasnt put solder on the pads yet which means he didnt use it lol
Hi l recently upgraded my laptop to Windows 7ultimate. Problem is I cannot load Arduino drivers since in the device manager, the ports and lot does not appear. How do I sort out this?
I would try re-installing the FDTI drivers from here www.ftdichip.com/Drivers/VCP.htm
Do this with the arduino (or any other unnecessary device) disconnected
-Restart the PC and then go to your devices manager and check if there are any flagged in red or yellow and reinnstall them manuallt from the folder you've downloaded (by browsing from that window).
Then it should work. just select the right COM
This one is for december bro ! Not now .....😂😂
LOL, is actually 2019 and some from 2018.
@@ELECTRONOOBS I think he means for the Christmas shopping craze :D
@@ELECTRONOOBS, excellent video, if there's ever drone weight lifting competition you could do some damage , If someone had a cheap simple drone controller and body(everything included) then clipped the wires to the cheap drone motors what would it take to wire the cheap drone body without the motors on a homemade drone with large motors? for the relay and controlling the motors?
@@ELECTRONOOBS , to increase the range of a drone not using satellites, say the drone carried a few relays that could be deployed when coming close to become out of range of the controller then a relay could dropped with a helium airbag parachute or maybe a miniature drone combined with helium to keep position is this possible?
Make a smart miror
I see that you use ESP8266 and I am new to esp. I want just to program the ESP8266 with my android phone and a OTG cable because I don't have any pc. Can you please help me? Or somebody?
It is better you borrow a pc from your friends and family. Because ESP8266 is power hungry. This may fry up your phone.
perfect...videos
You should make some projects based on Raspberry pi
Make a smart watch which have a touch screen,android,mobile pairing etc
Why you always have a banana at side
Nice achievement which influence the beginner like me. Salute u my big brother
excellent
Whatpsapp no Kia hy
Nice keep doing
super bro
Hello I am greatly inspired by your smart watch project I created the same (without PCB) with seperate components I uploaded the simple watch code (took 89%) then I modified it and removed watchen logo and show logo mode and add temperature ( took 91% ) I want to get notifications on my watch but I'm unable to do so can you make a code which will display real time notifications if you remove the notification menu it will require less storage I meant when someone is calling the watch will display " incoming" just like simple realtime notification output.Link of my updated code:drive.google.com/file/d/1YkS7aMowXsO-SleAOqBymv1klsGs984f/view?usp=sharing
Where's your silver play button?
Inspiring 👍
JLCPCB has ruined every electronics diy channel.
Thanks
Great video! Want to collab for PCB videos?
Why you using 🍌 bananas 😂 every where 👀👀
Good
Hello
waw
Dreams💓 one day I'll!!!
Awesome 😁
Gross that you not even cleaned your boards before showing them 😣
23% only, because only thing you do is to advertise your products, instead of doing something interesting for the audiense, like to show something get fixed or designed or something simple without MCU. Microcontrollers are boring and i don't see electronics in programming, its just flash USB memory (one chip on board and nothing else to see), a soulless typing and completely different thing. Show some CMOS or TTL logic or analog implement or combination of them all. Teach audiense something real if you think you are good in electronics. Many channels falls down into the deep rabit hole with those stupid MCU's. Be more creative.