What was the wrong with the condenser?! why no gas's come out when u cut liquid line? where was the blockage exactly? I bleave it's not the condenser! thanks.
Nothing wrong with the condenser. Liquid entering left side of filter-drier then entering capillary tube. The tube came out no gas is capillary tube. The gas came out from left tube was plentiful. That tube is liquid line. Blockage was at the joint section of liquid line and filter-drier.
great video, good cameral work, I little more explanation on when you do you take the stem valve out? or do you need to. I have replaced my compressor evac the system, filled the unit with 134 and it seems that the vanes in the freezer part are not getting cold. its an LG compressor, If I was to push compressor air into the system where would I put the air into, the side that goes into the coils? to push anything out or just replace the coils call it a day.
Replaced compressor and condenser Of course, the dryer was also replaced. When gas is injected and operated, the red LED blinks 6 times. What could be the problem?
My little problem is replaced filter vacuum and gas up the freezer only last for two to three months what is the problem can you advice me please thanks
@@TopAppliancesrepair Its a Refrigerant recovery machine. Freon, is the trademark name for r22 and not just any refrigerant. Refrigerants does not get old.
Wherever frost is wherever clogging is. The clogged section is at joint of liquid line and filter-drier. Nothing to do with condenser coil.
What was the wrong with the condenser?! why no gas's come out when u cut liquid line? where was the blockage exactly?
I bleave it's not the condenser!
thanks.
Nothing wrong with the condenser. Liquid entering left side of filter-drier then entering capillary tube. The tube came out no gas is capillary tube. The gas came out from left tube was plentiful. That tube is liquid line. Blockage was at the joint section of liquid line and filter-drier.
What kind of rod you use When you braze copper to steel thank you
what are the soldering rods you are using, ? how dificult is it to solder the aluminum and copper parts? im in the learning process
Releasing refrigerant into the atmosphere is a violation of the law, a heavy fine and loss of EPA license !
Purposely releasing refrigerant into the air is a crime. In cases like this where there’s very few ways to prevent it it’s generally acceptable.
I have 3 valve evap, i did compressor replacement it shows there blocked sealed system. What you think?
great video, good cameral work, I little more explanation on when you do you take the stem valve out? or do you need to. I have replaced my compressor evac the system, filled the unit with 134 and it seems that the vanes in the freezer part are not getting cold. its an LG compressor, If I was to push compressor air into the system where would I put the air into, the side that goes into the coils? to push anything out or just replace the coils call it a day.
Replaced compressor and condenser Of course, the dryer was also replaced.
When gas is injected and operated, the red LED blinks 6 times. What could be the problem?
What was the wrong with the condenser?! why no gas's come out when u cut liquid line? where was the blockage exactly?
thanks.
From India man .. show your tool kit please.. or do i work with you...😅
Question I had is do u have to update the motherboard on newer models before you replaced the compressor and dry filter.
Did you run the 3 way valve into service mode otherwise you just did vacuum one side of the system
What about when lg fridge freezer is working bit fridge section wony get past 50deg... ice block forms right at evaporator supply.
That joint will fail. You can't use silfos for steel/steel or steel to copper. Use 56% flux coated rod.
That's 100 % silver
Soldier and flux that all he needs if you know how to do it
The phosphorus will attack the steel and the joint will fail.
@@RobertLanghorn yep
I'm in Richmond Texas. My sealed system went out on my Samsung refrigerator. Can you replace it for me?
Hello yes call 832-514-1594
Why would a LG be pulling into vacum replaced compressor and filter and ff evap
Good confidence and wOrk
Have the same unit /model, compressor is running but not cooling, the evaporator coil is clean, any tips?
What did you find out? I have the same problem
@@jawnlaughlin5 replaced the compressor and charge it
Right on i bet that was expensive. I got the fridge for free and its in good shape almost new just doesnt cool
Very nice ❤
My little problem is replaced filter vacuum and gas up the freezer only last for two to three months what is the problem can you advice me please thanks
You have a number where I can reach you to come fix my LG refrigerator.
What if the drier is cold but not frozen
How do you remove the Freon from the system?
You have to use the machine call frion recovery , that is kind of sucks the old frion ,
@@TopAppliancesrepair
Its a Refrigerant recovery machine.
Freon, is the trademark name for r22 and not just any refrigerant.
Refrigerants does not get old.
@@swayfn298 freon was R 12
Tengo un refrigerador Kenmore Élite no enfría sólo check Valve se congela, los ventiladores trabajan y tiene gas
Nothing wrong with the condenser. I hope you didn’t charge the owner for your lack of knowledge.
@@celsopizano6677 condenser was bad , that fix the problem ,
They make them outta bloody shit nowadays don’t they
Thank you for sharing
You should of just bypassed the line straight to the condenser
I like grapefruit.
ok
I have a LG refrigerator that’s not getting cold everything turns on then and makes a loud sound and turns off can you help
You not replying how much in psig on your gage the hight and the low side is showing on the gage of Freon please thank you