You’re welcome Vince. Always willing to help. Some more advice you should keep peddle assist 0 at 0% so if your off your bike and someone or you grabs the handlebar the throttle doesn’t engage and dump your bike and yourself on the ground. Use it as setting a safety just distribute the power between 1-5 and when you get off the bike put it on 0. Enjoy and be safe
Also on this bike all the settings are kind of backwards. Like on your soft start 0 is the fast start and 5 is slow start. So boost off is really on… does that make any sense 🤣 the bike is awesome and the company they have helped me with my questions
It did miss fire. Things like 1 plug would fire. You should check to see if your battery is charging when the bike is running. And check the stator out at the stator plug.
@@roberttalbot4912 stator out at the plug that comes out the engine, while turning engine over check it in ac should be at least 20 to 28 AC volts at idle even higher when reving.
Looks like a bad stator. It will be completely dead soon. Make sure before you pull it out. Multimeter should be in ac. If yours is that low it's going. Those engines are big they require a lot. My stator was putting out 2 to 3 volts in ac. All the magnets came off the stator rotor. I bet when you pull yours 95 percent of the magnets will be gone all in chips like mine was.
You’re welcome Vince. Always willing to help. Some more advice you should keep peddle assist 0 at 0% so if your off your bike and someone or you grabs the handlebar the throttle doesn’t engage and dump your bike and yourself on the ground. Use it as setting a safety just distribute the power between 1-5 and when you get off the bike put it on 0. Enjoy and be safe
Hi mark...
Can you tell me what the pwm is....current limit...all the settings.
What setting did you change to get power on “0”?
Also on this bike all the settings are kind of backwards. Like on your soft start 0 is the fast start and 5 is slow start. So boost off is really on… does that make any sense 🤣 the bike is awesome and the company they have helped me with my questions
Hi. I’m looking at the Romeo Pro 2. What does the boost function do. Looks like you don’t need a boost when you can go 40+. Thanks for your videos.
Right now, I'm new to the bike, i got it a week ago. But i will be testing it on the hills around me to see what it is capable of.
Hey Vic . What happened to your Bigdog when your stator went bad. My bike started miss firing real bad.
It did miss fire. Things like 1 plug would fire. You should check to see if your battery is charging when the bike is running. And check the stator out at the stator plug.
The stator show OL on the meter
Battery is charging
@@roberttalbot4912 stator out at the plug that comes out the engine, while turning engine over check it in ac should be at least 20 to 28 AC volts at idle even higher when reving.
@@BigDogRidgeback o
Someone please help my speedometer on my Romeo pro 2 speedometer cable it’s not working
Did you set the magnetic speed setting to 6?
It fluctuates between 5 and 12 and doesn’t go up when accelerating
Looks like a bad stator. It will be completely dead soon. Make sure before you pull it out. Multimeter should be in ac. If yours is that low it's going. Those engines are big they require a lot. My stator was putting out 2 to 3 volts in ac. All the magnets came off the stator rotor. I bet when you pull yours 95 percent of the magnets will be gone all in chips like mine was.