My Rx v371 was not powering up. I cleaned it using alcohol and did every possible thing. Left it unattended for last 4 years assuming it fried. Out of curiosity I was fiddling with it today and referred to some videos, incl yours. Wallah it started working in one go. Thanks a lot for this video.
Thanks for the advice. It was solid. My Yamaha rx-v371 acted up and I thought it was ready to be thrown out as I started to put thing in place for a replacement. You saved me some money there. Youj're the champ
hello i have the Yamaha receiver RX-679, the red led for the power is on but cannot get any display or nothing when I push the power button, will flash red for about 10 time and nothing turns on, so i tried few times your suggestion tone control plus straight togheter and power waiting 3 second on hold . do you have any other suggestions ore need to take for repair ? thanks for the videos i love every one very helpful and easy to follow
Great Video. I have a RX-V675 that was off for a couple days with a power outage. When power came back I get an "Internal Error" on the display. Have tried a couple time doing a USB firmware reload, but get the Error 4000 at the end. I have also attempted the power on holding the "INFO" and "STRAIGHT" button, but get the "No Model Info" message, and no buttons allow me to step through anything. Any other ideas before I take it to a service center which is many miles away from me???? Thanks in advance.
I have found the 2 following problems with the power on my RX-V585, when it’s connected to 110 V, when testing voltage on leads going through to the transformer connector I have no V reading, but when the Transformer connector is unplugged, I get voltage at the leads. what can cause this? also, on T5401, at output leads 8,9,10 and 11, I have no DC volts, what should be the reading? because I have 0 on my multimeter. Are you able to help me?
Quick question if the short cut to try and locate the fault won’t cause the front panel to come on does that mean the front panel isn’t working or does that likely mean it’s in the power supply?
Hi bro, I have Rx-v557 yahama amplifier, it is playing on ups batteries 220v but not playing on outdoor electricity trun on but tripped, I removed all cables of speakers, but still issue exists. How to fix it. Thanks
The link to "Can we fix the YAMAHA RX-V371 Receiver" that is listed in the comments does not seem to be working. The error states that it is a private video? What should I do? Please and thank you.
Hey fantastic Gonzalo. But remember, if it continues to trip get it checked out by a qualified electronics technician. Most of the time it is the dust and Capacitors that need replacing on the power supply board. Higher temperature electrolytic capacitors (105 celcius), will better than the factory ones. What model Yamaha did you have???
Powered on an RX-V483 that knowingly worked about two years ago. It's just been sitting unplugged since then. When I powered it on (nothing connected to it whatsoever), it clicked and immediately turned off. While no smoke, it did smell like something electrical. Anyways, not it just has a flashing red LED when trying to power it up. When doing the INFO + TONE CONTROL + POWER (whether I do the press, or press-and-hold method), the unit clicks, the LED turns off, but then there's no display and it immediately goes back to standby. If I hold down INFO + plug it in, I had a display and was able to successfully update the firmware. After that, the issue still remains. Any idea?
Is there a quick fix for the "decoder off" There is video via hdmi but no audio. Tried different HDMI cables with no change. On the display, it used to have icons of the speakers. They do not show up any more. Yamaha HTR-5063
Thanks in advance! My old Roku Ultra used to properly power my TSR-5830 on and off. I needed a new Ultra and now it will only turn the AVR off but not on. Can you help?
I just saw your "read the FAQ" suggestion...sorry! But I don't think I see my issue because the receiver operates with the remote and front panel buttons (I'm guessing my problem is with HDMI control?) unless you're saying I'm incorrect and that this is a repair issue. btw, a factory reset didn't fix the problem although it did cause me to lose sound from the center channel (thinking I lost a setting that I can't yet diagnose).
I would take the Yamaha to your Yamaha service agent or an electronics repairer, so they can check the diagnostics logs. Most problem a voltage rail problem ?
Got a RX-V479 won't turn on and it has a red light on constantly we tried your reset method but it didn't work. Can you advise us further. Really appreciate your help
Hey , what is the difference between pressing tone control + info and tone control + straight ? On the service manual it says "Starting Self-Diagnostic Function While pressing the “TONE CONTROL” and “INFO” keys, press the Power key to turn on the power, and release those 2 keys. The self-diagnostic function mode is activated." So if im correct tone + info will give you the error code directly without searching in the sub menu with the program key ?
There are two different methods, and it all depends on what Yamaha receiver you have. I put both options in the video "FAQ's" in comments, to cover everything made in the last 13 years. As long as you get an error code, thats all that matters I also give pointers on how to find service manual for your Yamaha, so people can checkout the service manual theirselves. Cheers R2R
We have a RX 477 & The red light keeps on flashing red, tried tone, straight and info buttons in different comb's hear a clicking sound and the arc system on the tv is saying that audio system is on, but no lights are showing on the screen, so must be a internal problem i dont think its in protection mode, we had a party sons birthday and the sound was up for a while, so must be a internal problem i guess unless someone can help lease?
Having trouble disconnecting the ribbon cable. For this connector, one corner is diagonal and one end has a mark on it. How do I open it to remove the ribbon cable?
For these models, one end of the cable is soldered in, but the other end can usually be removed (There will be a locking mechanism) But unless you are a trained technician, leave for the experts
Hey there I have v471 and only problem I have here is that the led light for the words that say “decoder” and such it won’t turn on at all without letters, it just gives me a red light that is next to the power button any tips?
Sorry that is a later video for release. Try this one ruclips.net/video/N995AhmH3EI/видео.html Otherwise you will have to take it to an authorised repairer
My 675 is blinking the speakers icon cutting the sound from it. Happens on radio or HDMI cable. Disconnected all speakers cable and happens using one or other speaker.
Due to the high volume of comments, we have put a FAQ in the comments. The FAQ pinned at the top! You should find your answer in this FAQ or comments underneath. Cheers R2R
@@Repair2Renew I already checked it don't have any repairers here so it's a do 8t your self or buy a new one it's the hdmi board I was wondering if you can source one my luck here is limited
Moja yamaha nie chce się włączyć, ale gdy zrobię ten sposób to włączy się, ale nie załączy się przekaźnik i od razu się wyłącza, wiesz co może być problemem?
Your Yamaha has gone into protect mode. You may have to take it to a yamaha service technician. checkout the longer version of the video to see the likely cause of this fault. woja Yamaha przeszła w tryb ochrony. Być może będziesz musiał zanieść go do technika serwisu yamaha. sprawdź dłuższą wersję wideo, aby zobaczyć prawdopodobną przyczynę tego błędu. ruclips.net/video/ozlw5ZSSJ5I/видео.html
Due to the high volume of comments, we have put a FAQ in the comments. The FAQ pinned at the top! You should find your answer in this FAQ within comments or the video description. Cheers R2R
Just follow the instructions in Video, this will un-brick your rx-v385. But you will have to get the fault fixed eventually, most likely dry capacitors on power supply board. Get your electronics technician/repairer to replace them all, with higher temperature (105 Celcius or 220 fahrenheit) electrolytic capacitors. cheers MBK
Hi I have Yamaha HTR-3072 Sony TV KDL43W800D On my Yamaha avr why it is showing PCM ? When i click straight(Raw content) on remote. It should show DD/DTS Even if i am playing 5.1 DD DTS etc. content on TV. Connected ARC from avr to TV Setting on TV set to Digital Out (DD/DTS)
If its a Yamaha made in the last 10 years, try this video ruclips.net/video/N995AhmH3EI/видео.html Otherwise you will have to google up factory reset for your model of Yamaha
Seems like you aren't replying to anyone's comments, just liking their posts for some reason. I have a TSR-5810 and I have no reaction. The power button doesn't click, and nothing turns on, I tried holding power for 15 seconds, and I tried tone control, info, and straight combinations. No reaction. It's like it's dead. Where should I start looking for the problem?
Due to the high volume of comments, we have put a FAQ in the comments. The FAQ pinned at the top! You should find your answer in this FAQ within comments or the video description. Cheers R2R
@@Repair2Renew It's like you didn't even read my comment. Must be a copypaste reply. Your FAQ says to take it to an authorized repairer, so it doesn't answer my question. I will try to figure it out myself since you aren't of much help.
@@SilverSparrow5 Yes I did read your comment. But That why I put in a FAQ at the top, so people could easily find it. I am also replying to the same question over and over again, Thats why I put FAQ at the top. I have a huge number of comments, I have to reply to everyday, unfortunately I cannot get to all of them. Unfortunately, I have not got the time to help everybody. Also I like to have some life balance between family, RUclips and my Job. Cheers R2R
✅ FAQ - Frequently asked questions (Read all Questions and Answers) ▶ How do I put in "diagnostics mode" or "clear system protect" 📖 IF DOES NOT TURN ON: (1) Unplug, wait 10 sec, plug back in (2) Hold down tone and straight buttons (3) Then push the power button (BUT KEEP HOLDING TONE & STRAIGHT FOR EXTRA SECOND) If this does not work, you will have to take to an authorised repairer ▶ I do not have a "Tone" or "Straight" or "Other" button? 📖 You have have to do some googling, to find information relevant to your model But try "Tone" and "Info" at same time, whilst holding the "Power" ▶ How do I FACTORY RESET? 📖 Go to this video ruclips.net/video/N995AhmH3EI/видео.html ▶ I have done a FACTORY RESET and lost a function (bluetooth, remote, etc) 📖 Try to update the firmware, google "firmware update" and then the "model number" Checkout OWNERS MANUAL on the Yamaha website. ▶ How can I fix my YAMAHA? 📖 If you are not a technician or engineer, take it to your Yamaha service centre ▶ I do not have a Yamaha service centre near me ! 📖 Take your Yamaha to your an electronics repairer. ▶ Can you help me fix my Yamaha Receiver? 📖 Most of the time, unfortunately not, unless I have the receiver in front of me. Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website. ▶ My Yamaha keeps on tripping ! 📖 It has a major problem that need rectification. Take it to an authorised repairer ▶ Where do I get SERVICE MANUAL? 📖 Go to elektrotanya.com/keres Then search for model number ▶ Where do I get the OWNERS MANUAL? 📖 Go to usa.yamaha.com/support/manuals/index.html Then search for model number ▶ I am have a problem operating my Yamaha, can you help me? 📖 Download the owners manual Go to usa.yamaha.com/support/manuals/index.html Then search for model number ▶ My yamaha just goes "click" 📖 Take it to an authorised repairer ▶ My Yamaha RX-V ??? receiver just stopped producing sound whilst watching TV, or listening to radio, etc 📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose. Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website. ▶ Didn't work on RX-V ???. Any ideas? 📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose. Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website. ▶ I am taking a voltage measurement on my Yamaha, is this correct? can you help me ! 📖 If you are not a technician or engineer, take it to your Yamaha service centre ▶ My yamaha receiver has any one of multiple problems or faults 📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose. Take it to an authorised repairer or check OWNERS MANUAL on the yamaha website. ▶ I have another type of receiver/radio/stereo ?? Can you help me fix it 📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose. Take it to an authorised repairer. ▶ You just gave me a "thumbs up" and a "heart", but did not answer my question? 📖 Answer is in the FAQ's in description of this video or pinned to the top in comments.
I tried this method last night and my receiver works perfectly, thank you so very much.
Many thanks for this. Brought my RX-V373 back to life!
Mine clicks but wont start up. Doesn't light at all ! & Doesn't go into program at all. Any suggestions
My Rx v371 was not powering up. I cleaned it using alcohol and did every possible thing. Left it unattended for last 4 years assuming it fried.
Out of curiosity I was fiddling with it today and referred to some videos, incl yours. Wallah it started working in one go. Thanks a lot for this video.
Great to see it worked !
Thanks for the advice. It was solid. My Yamaha rx-v371 acted up and I thought it was ready to be thrown out as I started to put thing in place for a replacement. You saved me some money there. Youj're the champ
Thanks Hayde
Glad it helped
Less easily fixed Yamaha's to landfill
Thanks ... Tone control & info button worked for me... Mine is a Yamaha HTR-4071... Definitely needs a dust too..
Thank you I thought my amp was done but followed this video and hey presto it lit up after 6 months of not working HTR 2064 saved me buying new one
Great help ! I solved my yamaha power on issue !
Great to see your Yamaha is powering on
Cheers MBK
tone + straight + power produces a click but no display ever comes on. any suggestions?
You are a life saver even though im an idiot to bring a yamaha rx v373 in to a Aluminum foundry lol
I could just image the amount of dust and rubbish inside your yamaha.
cheers
Thanks for the info. although I didn't need it this time it is good to know. I did however save it for later if I ever need it.
hello
i have the Yamaha receiver RX-679, the red led for the power is on but cannot get any display or nothing when I push the power button, will flash red for about 10 time and nothing turns on,
so i tried few times your suggestion tone control plus straight togheter and power waiting 3 second on hold .
do you have any other suggestions ore need to take for repair ?
thanks for the videos i love every one very helpful and easy to follow
have u fixed your receiver? mine is having the same problem
Perfect!!! I solved the issue with the video. Thank you!
Glad it helped!
Thanks! Got my HTR-3064 going with the same method. :)
Glad it helped
very helpful it was like a magic thank you very much
Great Video. I have a RX-V675 that was off for a couple days with a power outage. When power came back I get an "Internal Error" on the display. Have tried a couple time doing a USB firmware reload, but get the Error 4000 at the end. I have also attempted the power on holding the "INFO" and "STRAIGHT" button, but get the "No Model Info" message, and no buttons allow me to step through anything. Any other ideas before I take it to a service center which is many miles away from me???? Thanks in advance.
Such a life saver thank you
Glad it helped
Thank you for the information brother
thanx for your help buddy . Its work well for me . Your legend
Happy to help Flasha
I have found the 2 following problems with the power on my RX-V585, when it’s connected to 110 V, when testing voltage on leads going through to the transformer connector I have no V reading, but when the Transformer connector is unplugged, I get voltage at the leads. what can cause this? also, on T5401, at output leads 8,9,10 and 11, I have no DC volts, what should be the reading? because I have 0 on my multimeter. Are you able to help me?
Quick question if the short cut to try and locate the fault won’t cause the front panel to come on does that mean the front panel isn’t working or does that likely mean it’s in the power supply?
Hi bro, I have Rx-v557 yahama amplifier, it is playing on ups batteries 220v but not playing on outdoor electricity trun on but tripped, I removed all cables of speakers, but still issue exists. How to fix it. Thanks
RX-V592 - not have tone control and straight button :/ I power and freeze ... see on LCD CD and thats its all ... any button work
Hola soy de mexico ,,tengo el modelo rx v 367 lo enciendo y tarda para entrar las bosinas ,me pudiera ayudar con algun tutorial??? De antemano gracias
Thank you so much. Worked great for me!
Great it worked for you !!!
The link to "Can we fix the YAMAHA RX-V371 Receiver" that is listed in the comments does not seem to be working. The error states that it is a private video? What should I do? Please and thank you.
That is a future episode coming up, so will not be available for view yet..
The original episode was remastered.
How to reset Yamaha HTR-6140 to play sound to two (2) Bose 4001 and a set of Advent Jade towers. Thanks !!
Thanks! works for me!
Hey fantastic Gonzalo. But remember, if it continues to trip get it checked out by a qualified electronics technician. Most of the time it is the dust and Capacitors that need replacing on the power supply board. Higher temperature electrolytic capacitors (105 celcius), will better than the factory ones. What model Yamaha did you have???
Powered on an RX-V483 that knowingly worked about two years ago. It's just been sitting unplugged since then. When I powered it on (nothing connected to it whatsoever), it clicked and immediately turned off. While no smoke, it did smell like something electrical. Anyways, not it just has a flashing red LED when trying to power it up. When doing the INFO + TONE CONTROL + POWER (whether I do the press, or press-and-hold method), the unit clicks, the LED turns off, but then there's no display and it immediately goes back to standby. If I hold down INFO + plug it in, I had a display and was able to successfully update the firmware. After that, the issue still remains. Any idea?
Take your yamaha to an authorised repairer or electronics repair shop.
@@Repair2Renew Unfortunately that'll cost me more than the receiver's worth. To the electronics junkyard it goes.
Is there a quick fix for the "decoder off" There is video via hdmi but no audio. Tried different HDMI cables with no change. On the display, it used to have icons of the speakers. They do not show up any more. Yamaha HTR-5063
You need to do a reset, just released the video.
Just for you :)
@@Repair2Renew maybe the dsp chip is bricked
Thanks in advance! My old Roku Ultra used to properly power my TSR-5830 on and off. I needed a new Ultra and now it will only turn the AVR off but not on. Can you help?
Do you have any advice?
I just saw your "read the FAQ" suggestion...sorry! But I don't think I see my issue because the receiver operates with the remote and front panel buttons (I'm guessing my problem is with HDMI control?) unless you're saying I'm incorrect and that this is a repair issue. btw, a factory reset didn't fix the problem although it did cause me to lose sound from the center channel (thinking I lost a setting that I can't yet diagnose).
HI I have a Yamaha HRT-4063 , when I increase the volume it goes to Protection mode and power off. Any idea how to fix it? in low volume its works..
I would take the Yamaha to your Yamaha service agent or an electronics repairer, so they can check the diagnostics logs. Most problem a voltage rail problem ?
Can you tell me how to do this on Yamaha RX-V6A TSR-700 to clear system protect?
No idea, you will have to check instructions.
Also check FAQ's in video description
Got a RX-V479 won't turn on and it has a red light on constantly we tried your reset method but it didn't work. Can you advise us further. Really appreciate your help
Follow the reset procedure in the FAQ in the comments of this video.
Failing that, you will have to go to a authorised repairer.
Hey , what is the difference between pressing tone control + info and tone control + straight ? On the service manual it says "Starting Self-Diagnostic Function While pressing the “TONE CONTROL” and “INFO” keys, press the Power key to turn on the power, and release those 2 keys.
The self-diagnostic function mode is activated." So if im correct tone + info will give you the error code directly without searching in the sub menu with the program key ?
There are two different methods, and it all depends on what Yamaha receiver you have.
I put both options in the video "FAQ's" in comments, to cover everything made in the last 13 years.
As long as you get an error code, thats all that matters
I also give pointers on how to find service manual for your Yamaha, so people can checkout the service manual theirselves.
Cheers R2R
Hi sir please help me I have yamaha rxv573 av receiver fron right low volume problem and mute
thank from rx-v373 👍👍👍👍👍❤❤
My rxv 365 didn't do anything when I held the buttons... (no output from sub) older reciever
It doesn’t work on my RX-V485, the red dot beside the power button still blink after hitting the power button, and the receiver won’t turn on.
We have a RX 477 & The red light keeps on flashing red, tried tone, straight and info buttons in different comb's hear a clicking sound and the arc system on the tv is saying that audio system is on, but no lights are showing on the screen, so must be a internal problem i dont think its in protection mode, we had a party sons birthday and the sound was up for a while, so must be a internal problem i guess unless someone can help lease?
Doesn’t work on my RX-D485. Won’t start in diagnosis mode.
Having trouble disconnecting the ribbon cable. For this connector, one corner is diagonal and one end has a mark on it. How do I open it to remove the ribbon cable?
For these models, one end of the cable is soldered in, but the other end can usually be removed (There will be a locking mechanism)
But unless you are a trained technician, leave for the experts
Hey there I have v471 and only problem I have here is that the led light for the words that say “decoder” and such it won’t turn on at all without letters, it just gives me a red light that is next to the power button any tips?
Give this video a go
ruclips.net/video/sImJCqP_btM/видео.html
Otherwise you will have to take it to an authorised repairer.
It says the video is private
Sorry that is a later video for release.
Try this one ruclips.net/video/N995AhmH3EI/видео.html
Otherwise you will have to take it to an authorised repairer
RX-V4A has no tone or straight button. Anyone find a solution?
Halo sir i have rx-377 internal error issue how to fix please help
My 675 is blinking the speakers icon cutting the sound from it. Happens on radio or HDMI cable. Disconnected all speakers cable and happens using one or other speaker.
Any suggestion?
Due to the high volume of comments, we have put a FAQ in the comments.
The FAQ pinned at the top! You should find your answer in this FAQ or comments underneath.
Cheers R2R
Sit how to yamaha rx-v471 100v but saldly plug into 220v just a bit longer only.
Hmmm sounds like a bit of a violent death of your Yamaha.
OR, the bloody little cap 22nF in the input power supply section.
Hello I have rx-377 not powering on how to fix
It's always best to take your yamaha to your yamaha service center or local repairer.
Then you can get it checked out properly and safely !
@@Repair2Renew I already checked it don't have any repairers here so it's a do 8t your self or buy a new one it's the hdmi board
I was wondering if you can source one my luck here is limited
@@joshallround Unfortunately parts are hard to come by. You might have to check ebay. Also any work that you do is "At your own risk"
Moja yamaha nie chce się włączyć, ale gdy zrobię ten sposób to włączy się, ale nie załączy się przekaźnik i od razu się wyłącza, wiesz co może być problemem?
Your Yamaha has gone into protect mode. You may have to take it to a yamaha service technician. checkout the longer version of the video to see the likely cause of this fault.
woja Yamaha przeszła w tryb ochrony. Być może będziesz musiał zanieść go do technika serwisu yamaha. sprawdź dłuższą wersję wideo, aby zobaczyć prawdopodobną przyczynę tego błędu.
ruclips.net/video/ozlw5ZSSJ5I/видео.html
how to reset yamaha natural sound av receiver rx-v385
Due to the high volume of comments, we have put a FAQ in the comments.
The FAQ pinned at the top! You should find your answer in this FAQ within comments or the video description.
Cheers R2R
Hi sir i have rx-v385, wont tur on.. How can i fix this.. Can you help me..
Just follow the instructions in Video, this will un-brick your rx-v385.
But you will have to get the fault fixed eventually, most likely dry capacitors on power supply board. Get your electronics technician/repairer to replace them all, with higher temperature (105 Celcius or 220 fahrenheit) electrolytic capacitors.
cheers MBK
im done doing this but i received device error. what am i suppose to do now?😅
Hi
I have Yamaha HTR-3072
Sony TV KDL43W800D
On my Yamaha avr why it is showing PCM ? When i click straight(Raw content) on remote. It should show DD/DTS
Even if i am playing 5.1 DD DTS etc. content on TV.
Connected ARC from avr to TV
Setting on TV set to Digital Out (DD/DTS)
what does dc prt 197h mean
It indicates a DC amplifier problem. The Voltage is too "High".
Take the Yamaha to your nearest service provider.
DO NOT fix it yourself.
@@Repair2Renew do you have a estimate of the price
@@msoles30 It could cost anywhere from $100 - $350. You Yamaha Service provider will have a more accurate price.
Maybe beyond economic repair (BER)
@@Repair2Renew do you think I can get a estimate over the phone from them
@@msoles30 Well you could give it a try.
If it's a common fault, they may be able to give you an accurate quote.
Even after trying this it still won’t turn on. What should I do?
hi, my yamaha just suddenly the surround lost or do not have sound. pls help
If its a Yamaha made in the last 10 years, try this video
ruclips.net/video/N995AhmH3EI/видео.html
Otherwise you will have to google up factory reset for your model of Yamaha
My fault is 21-1 . PS1 100L what does that mean?
It keeps making a clicking noise and the screen won’t turn on
Take your Yamaha to your nearest Yamaha repair centre
Having the same problem on my RX-V373
gott a yamaha rx-v667 no power .. i gett code: ps prt: 147 H
Do no how to fix it 😅😅
You will have to take to a qualified repairer
Seems like you aren't replying to anyone's comments, just liking their posts for some reason. I have a TSR-5810 and I have no reaction. The power button doesn't click, and nothing turns on, I tried holding power for 15 seconds, and I tried tone control, info, and straight combinations. No reaction. It's like it's dead. Where should I start looking for the problem?
Due to the high volume of comments, we have put a FAQ in the comments.
The FAQ pinned at the top! You should find your answer in this FAQ within comments or the video description.
Cheers R2R
@@Repair2Renew It's like you didn't even read my comment. Must be a copypaste reply. Your FAQ says to take it to an authorized repairer, so it doesn't answer my question. I will try to figure it out myself since you aren't of much help.
@@SilverSparrow5 Yes I did read your comment.
But That why I put in a FAQ at the top, so people could easily find it.
I am also replying to the same question over and over again, Thats why I put FAQ at the top.
I have a huge number of comments, I have to reply to everyday, unfortunately I cannot get to all of them.
Unfortunately, I have not got the time to help everybody.
Also I like to have some life balance between family, RUclips and my Job.
Cheers R2R
didn't work any other suggestions 😢😅
Mine is still dead no reponse
✅ FAQ - Frequently asked questions (Read all Questions and Answers)
▶ How do I put in "diagnostics mode" or "clear system protect"
📖 IF DOES NOT TURN ON:
(1) Unplug, wait 10 sec, plug back in
(2) Hold down tone and straight buttons
(3) Then push the power button (BUT KEEP HOLDING TONE & STRAIGHT FOR EXTRA
SECOND) If this does not work, you will have to take to an authorised repairer
▶ I do not have a "Tone" or "Straight" or "Other" button?
📖 You have have to do some googling, to find information relevant to your model
But try "Tone" and "Info" at same time, whilst holding the "Power"
▶ How do I FACTORY RESET?
📖 Go to this video ruclips.net/video/N995AhmH3EI/видео.html
▶ I have done a FACTORY RESET and lost a function (bluetooth, remote, etc)
📖 Try to update the firmware, google "firmware update" and then the "model number"
Checkout OWNERS MANUAL on the Yamaha website.
▶ How can I fix my YAMAHA?
📖 If you are not a technician or engineer, take it to your Yamaha service centre
▶ I do not have a Yamaha service centre near me !
📖 Take your Yamaha to your an electronics repairer.
▶ Can you help me fix my Yamaha Receiver?
📖 Most of the time, unfortunately not, unless I have the receiver in front of me.
Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website.
▶ My Yamaha keeps on tripping !
📖 It has a major problem that need rectification. Take it to an authorised repairer
▶ Where do I get SERVICE MANUAL?
📖 Go to elektrotanya.com/keres
Then search for model number
▶ Where do I get the OWNERS MANUAL?
📖 Go to usa.yamaha.com/support/manuals/index.html
Then search for model number
▶ I am have a problem operating my Yamaha, can you help me?
📖 Download the owners manual
Go to usa.yamaha.com/support/manuals/index.html
Then search for model number
▶ My yamaha just goes "click"
📖 Take it to an authorised repairer
▶ My Yamaha RX-V ??? receiver just stopped producing sound whilst watching TV, or listening
to radio, etc
📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website.
▶ Didn't work on RX-V ???. Any ideas?
📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
Take it to an authorised repairer or check OWNERS MANUAL on the Yamaha website.
▶ I am taking a voltage measurement on my Yamaha, is this correct? can you help me !
📖 If you are not a technician or engineer, take it to your Yamaha service centre
▶ My yamaha receiver has any one of multiple problems or faults
📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
Take it to an authorised repairer or check OWNERS MANUAL on the yamaha website.
▶ I have another type of receiver/radio/stereo ?? Can you help me fix it
📖 I would love to help you, but unless the receiver is in front of me, it is hard to diagnose.
Take it to an authorised repairer.
▶ You just gave me a "thumbs up" and a "heart", but did not answer my question?
📖 Answer is in the FAQ's in description of this video or pinned to the top in comments.