it doest need to be adhered if its being loose laid due to were u are working, at district schools you cant use any kind of chemical, anywere else some stabond or water based should have that skylight nice and tight. sarnafil, firestone, durolast, johnsmanville, its all good...........
First; ras tape whit scrub and plates. Second; cut membrane and glue membrane and curve. Third; welder outside corners, flash and part of the top, YOU NEVER CUT THE TPO ON THE TOP. Last part: welder Inside/Outside Corners and TPO T-joint Covers or TPO Unsupported Flashing only if is necessary. Time; 15, 20 minutes.......Here in canada at winter time and -25 -30 degrees? eternity
So there is no need to use caulking before installing the skylight ?
Doesnt require glue below 12 inches
But will make a nicer product and makes it a little easier to detail.
And yes pigears are the way to go
Glue makes a tight wrap around the curb. You are right though although I suggest using glue . 9 years exp
shouldn't it all be glued to the wood?
thank you gor posting these videos.
@boblaboogle
oh yea... and how exactly would u do it 10 times better - huh mate? and what does it even have to do with sarnafil?
@dspecht - doesn't have to be - it should be watertight!
he leaves a open hole in the top of each corner when he cuts it. fold it into a pig ear and weld it all down and there is no possible leak.
it doest need to be adhered if its being loose laid due to were u are working, at district schools you cant use any kind of chemical, anywere else some stabond or water based should have that skylight nice and tight. sarnafil, firestone, durolast, johnsmanville, its all good...........
First; ras tape whit scrub and plates. Second; cut membrane and glue membrane and curve. Third; welder outside corners, flash and part of the top, YOU NEVER CUT THE TPO ON THE TOP. Last part: welder Inside/Outside Corners and TPO T-joint Covers or TPO Unsupported Flashing only if is necessary. Time; 15, 20 minutes.......Here in canada at winter time and -25 -30 degrees? eternity
DuroLast has premade curbs. So much nicer.
yea, he should put glue on the top of wood instead of nails
except the top corners where he cut the top corners
WTF is a "tape MAYsure" ??
Устройство мембранной кровли от180руб/м2 ООО в Сибирском регионе. В любое время года монтаж до -30
run the rubber right over it and cut the corners..... look like rookies to me.
BOOOOO just BOOOOOOO
Rubbish, could do it 10 times better in sarnafil
Jesus christ 😬😬 awful