The ONLY thing I would recommend is that everyone look up the torque values and torque that clutch back on other than that this is a helluva good video
Who cares if you are a cvt professional or not man. You wanted something done to the bike and YOU got it done PERIOD!!! This took alotttle research. Thanks for the video man very very very good and informative video.. Thanks again and keep posting about these particular rides if you can man??!! Thanks again
This will in 1000 km to 1500 km destroy your CVT. If it was really bad, it can destroy the crankshaft (Kurbelwelle) of the Motor. But you can use DR. Pulley weight "Rolls" (they are not really Rolls). They will slide better and the belt gets higher in the CVT too. Because they slide much better you will not loose power at low speed. In the carburetor was a little peace of plastic, it makes the hole tighter. You found it between the carburetor and the Engine. Now use a bigger exhaust and a bigger air fillter. A bigger air intake. Use in the carburetor a little bit bigger main jet (main carburetor nozzle /Hauptdüse) a bigger diameter, so the carburetor putts more fuel to the air. Its better for the motor. Its prevent the motor from overheating. I worked over 5 years as a mechanik at a official kymco dealer. Please excuse my bad english, if you have questions i will answer in german and we translate it togehter with google translate Best wishes from Germany Klaus
Like I said don’t no what it will do in the long run. Dealer want me to buy a 300 dollars shaft. I’m not spending anymore money after paying over 4000 for them. It’s been a year now and so far so good and I ride a lot. But thank you
Hey hole mirrr eine am Montag eine 300 er bin aber nicht der beste Mechaniker ( überhaupt ) darf man dein Kontakt haben falls was passiert oder dass ich dir meine zeige ! Hier der eBay Link welche ich kaufen möchte
Wow, I’ve been looking for this video for weeks now. Thank you so much saved me some money for sure. Can you upload video showing the top speed after the removal? Thanks
Question bro. I have 2 of these Kymcos 270. My son did the removal of the rings. He put everything back and when we tested the unit it made a noise. He didn't tighten the nut enough so the wheel hit the cover. Atv is faster but doesn't have the same take off ass my other one. Any suggestions. Thanks
can you do a video of the carbonator I bought a 300 and the carb was missing so i would like to see what the original one looks like thanks and good video
Yes kymco is pretty good. I’ve got some videos on my channel of it. It’s a good little atv. I’m talking about the kymco 270 mxu. The mongoose is probably same thing different plastics
I did a little research and came across someone who said to add this Boss Driven Face (collar) part # 22105-LBA7-900. And it will bring it to Kymco 300 speeds. I ordered mine but won’t come for 2 weeks. Said should do 40+ with the spacers taken out and this part put in.
The ONLY thing I would recommend is that everyone look up the torque values and torque that clutch back on other than that this is a helluva good video
True seems very likely to snap soft aluminum all over that trans lmao
68 ft lbs
Who cares if you are a cvt professional or not man. You wanted something done to the bike and YOU got it done PERIOD!!! This took alotttle research. Thanks for the video man very very very good and informative video.. Thanks again and keep posting about these particular rides if you can man??!! Thanks again
Thank you bro. Comments like this does inspire me to do more.
wow i have been looking for a video like this since last August thank you
Your welcome
Awesome bro got my quad to run great works like a champ now
Awesome..we took out my wife black one riding so far so good..
I got a 2018 kymco 270 mongoose, I like it.
Nice video. I followed your directions and it worked perfectly. Thanks!
Video was fantastic. Very detailed
Thank you for the video. I've been searching for anything on kymco for a few months. Any information you want to post would be much appreciated.
This will in 1000 km to 1500 km destroy your CVT.
If it was really bad, it can destroy the crankshaft (Kurbelwelle) of the Motor.
But you can use DR. Pulley weight "Rolls" (they are not really Rolls). They will slide better and the belt gets higher in the CVT too. Because they slide much better you will not loose power at low speed.
In the carburetor was a little peace of plastic, it makes the hole tighter. You found it between the carburetor and the Engine. Now use a bigger exhaust and a bigger air fillter. A bigger air intake. Use in the carburetor a little bit bigger main jet (main carburetor nozzle /Hauptdüse) a bigger diameter, so the carburetor putts more fuel to the air. Its better for the motor. Its prevent the motor from overheating.
I worked over 5 years as a mechanik at a official kymco dealer.
Please excuse my bad english, if you have questions i will answer in german and we translate it togehter with google translate
Best wishes from Germany
Klaus
Like I said don’t no what it will do in the long run. Dealer want me to buy a 300 dollars shaft. I’m not spending anymore money after paying over 4000 for them. It’s been a year now and so far so good and I ride a lot. But thank you
@@ridingonabudget1960 Please excuse, my english is very bad. But now i understand
I have a 2017 need to change to transmission fluid what do you recommend
Hey hole mirrr eine am Montag eine 300 er bin aber nicht der beste Mechaniker ( überhaupt ) darf man dein Kontakt haben falls was passiert oder dass ich dir meine zeige ! Hier der eBay Link welche ich kaufen möchte
@@ridingonabudget1960 @RidingOn ABudget Please excuse, my english is very bad. But now i understand
Heckyes
Wow, I’ve been looking for this video for weeks now. Thank you so much saved me some money for sure. Can you upload video showing the top speed after the removal? Thanks
Okay will do
@@ridingonabudget1960 how much top speed now?
@@magnumllama400 35 40 something like that but for sure it’s much much faster
@@ridingonabudget1960 mph?
@@ridingonabudget1960 why so slow?
Wow.. thank you for this , shop wants 200$
Have you ever messed with the idle adjustment have a 2020 as well and can’t get it to idle properly previous owner messed with idle screw
Question bro. I have 2 of these Kymcos 270. My son did the removal of the rings. He put everything back and when we tested the unit it made a noise. He didn't tighten the nut enough so the wheel hit the cover. Atv is faster but doesn't have the same take off ass my other one. Any suggestions. Thanks
For how many hours do I have to ride before doing it
You can do it whenever. Mine was done before the atv had even left the dealership.
20
For how many ours do I have to ride to do that
can you do a video of the carbonator I bought a 300 and the carb was missing so i would like to see what the original one looks like thanks and good video
Is this brand any good I'm looking into a new one kymco mongoose
Yes kymco is pretty good. I’ve got some videos on my channel of it. It’s a good little atv. I’m talking about the kymco 270 mxu. The mongoose is probably same thing different plastics
I did a little research and came across someone who said to add this Boss Driven Face (collar) part # 22105-LBA7-900. And it will bring it to Kymco 300 speeds. I ordered mine but won’t come for 2 weeks. Said should do 40+ with the spacers taken out and this part put in.
That is true. Mines top out at 52 mph now and I love it
@@Raybrown20555 what else did you do to get it that fast?
@@Raybrown20555 do a vid
Can you upload a link to buy that part
Do you know how to remove the top bulb??
Question: how long since you took off the spacers, and is the quad running perfectly fine?
It’s been a year but just uploaded the video about a month ago.
@@ridingonabudget1960 have you done a transmission oil change yet? I did mine only 1yr out of the dealership found some water in there too
I have one myself but I already paid 120 to get the clutch fixed and it sounds like a turbo lol
Bro my kymco 250 sounds like it’s super charged Bc I got to much water in the belt box 😂
@@hunterwebb6785 you will never know 😏
@@hunterwebb6785 it's super easy to drain did that on my kymco too lol
@@darthtyranus7683 yeah that shaft on mine was stuck to the bearing but I got it done
We need the carb clean video asap
I already did one..as soon as I get my phone fixed I will upload the video...
Can u do this on a 2021?
Possibly but I don’t have a 2021
If you ask the dealership will remove the limiter. At least they did for the 270 mxu.
They must have on mine. I have a 2015 MXU and ive had it up to 54 mph on a flat straight road.
@@independentfool are you sure it wasn’t set to k/ph?
@@ccf500 LOL! Im sure
My stock kymco is doing 40mph
68 ft/lbs