I bet if they disguised this as a master lock you would've been totally lost. It actually sounds like a clever way to throw off anyone wanting to get in
Good news is by the time someone figured out how to pick this lock, I've already had them on an hd camera that has notified me of motion and called the cops
The interactive pin is built into the plug. That’s the difference between Interactive and classic. On interactive the second pin is a rotating constant. Other than that both use the same pins.
Great video!! Just an interesting fact: The Mul-T-Lock keyways have 4 characters: 3 digits, and 1 letter. The first digit of the keyway code determines the position of the floating pin, the next two digits state the keyway, and the last character determines the colour of the floating pin, or if there is at all. (I.e.: A 206S key has the floating pin in the second position, has the 06 keyway, and a silver floating pin :D.) Since the first half of the 206 keyway is flat and without any warding, a 006 key will fit into a 206 lock just fine, but a 206 key will not fit into a 006 lock :D Thanks again for sharing
@@lockpickinglawyer what type of deadbolt should i put on the door-- since they are al pick able which one will take the longest -- to pick maybe my neighbor may catch em
What I'm hearing is this lock was more than a half hour challenge for you. Which in my book means noone is getting past. The other locksmiths in my area don't bother on stuff like this.
So what would you recommend for a consumer like myself living by his self as the best lock to put on my front door have any addition you might add for me to be safe
Great watching you do your craft. In beginning to doubt my locks. However they've paid for themselves. Is there a website I can access to see if my Mul-t-lok is UL rated or is the info on the packaging.
Awesome pick, So the UL rating is more based off of the drill protection? Guessing that is because the method of entry preferred by thieves is to drill a Mul T Lock?
LockPickingLawyer I was really was only askingif the only variations to the UL has only the little steel inserts or ball bearing above the pin stack. Really makes them like Master Lock more and more. I had a much higher standard for (Underwriters Laboratory) But the only difference maker is drill protection then I might consider a different lock onnmy front doors. Lol... I understand that LPL or pickers of that caliber will not be breaking into my house. But not every thief has or uses a drill. Thanks for the info. My thoughts on it mean nothing, keep up the good work.
@thelockpickinglawyer For reference, all you’ve got to do, is check on the opposite surface of the keyway, for the sprung nipple. What can a picker do if no binders are present? I’ve had an E11 closed shackle, in my naughty bucket, since 2012, not one pin set ever, tried everything. I have successfully picked many mlt’s, this one has taken over a 1000 hrs from me, with zero to show from it. I believe I’m going to dissolve it in acid, to bring this nightmare to an end.
They also have keys depending on your access level. Like manager key vs employee key. Employee key can only open certain locks and the manager key that can open all of them.
I have a 236G keyway and was told it is an interactive plus cylinder, but when I search for anything 236G online it appears to be the original interactive model. How do I know if the cylinder I have is an interactive plus? What are the cylinder differences between interactive and interactive plus?
Hi, I’m in the process of buying a home and I was wondering if you have any recommendations on deadbolts. I was looking at the Mul-T-Lock Interactive+ Cronus (Black Tie Edition) High Security Grade 2 Single Cylinder Dead-Bolt w/Thumb Turn. What do you think. Thanks for your time. Love your videos!!
Why? Do you think someone is going to try to pick your lock? Guy, this isn't the movies and dudes are sitting around with their master plan. Maybe 1% of thieves will even attempt to pick a lock, and that's a drastically high estimate. The rest will take crowbar to your door or a drill to your lock. High security locks give a very false sense of security
Well damn, was thinking about a MulT lock as it’s advertised as pick proof but then he opens it in no time what’s the point of spending that much money on a lock if it can be opened like that
Have to take into consideration the most likely thieves we come across aren't this skilled. Unless it's a targeted attack they'll move on to easier prey. Also what lock has he not breeze through?😂
so realistically if you didnt know what kind of gateway .. interactive... mt5 etc etc you would have a lot harder time? Is there something stamped on the front telling you what kind of key it uses?
huh?? I just spent everything i can afford on a mul t lock deadbolt cause it was supposed to be unpick-able? iMan i'm never leaving the house again. You are a master. Hats off to ya, please tell me that the average little punk thieves cant do that.
I just did the same. But honestly, if somebody has the specialized picks and knowledge to pick these, odds are they've got a good-paying security job, or they're a high-end jewel-thief. Either way, they're probably not going to be trying to get into some random house. At least, that's what I'm telling myself.
Whats the point of having any lock on your door? Mlti locks aren't cheap and the installation isnt cheap either. These shows of this guy picking open every lock on the market is virtually depressing. The best part of picking multi lock is its time consuming and by the time you get it opened you'll probably get caught & arrested. I believe in the 2nd amendment 100%.
Oh Dearest LPL I've been trying to contact you and Bill to no avail. Cannot write safely on public forum, buy need your help so badly that I can't express (water all your recommended videos, but I'm less than a novice presently just a victim! Not good for me! Please help me, I don't even have tools as yet, but have problems I'm sure you can answer. Please contact me., please...RmB
you know why buy locks when you & other who ever puts it on here how to pick locks. you are just helping the criminal. what are you all thinking. no common sense what so ever
![[249] Mul-T-Lock MT5+ Mortise Cylinder Picked and Gutted](http://i.ytimg.com/vi/1fX8ql1sa1E/mqdefault.jpg)
![[249] Mul-T-Lock MT5+ Mortise Cylinder Picked and Gutted](/img/tr.png)
![[702] The Naughty Bucket Chronicles - Mauer NW5 Euro Profile Cylinder Picked and Gutted](http://i.ytimg.com/vi/uGU0tFiJsbs/mqdefault.jpg)
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I bet if they disguised this as a master lock you would've been totally lost. It actually sounds like a clever way to throw off anyone wanting to get in
a tad problematic, if you get locked out of your house haha
nice picking as always.
you are most definately the king of Mul-t-locks
LOL, thanks. At least I'm king of something... certainly not my own house!
@@lockpickinglawyer I assume the king of the house is either Mrs. LPL or the cat?
Good news is by the time someone figured out how to pick this lock, I've already had them on an hd camera that has notified me of motion and called the cops
The interactive pin is built into the plug. That’s the difference between Interactive and classic. On interactive the second pin is a rotating constant. Other than that both use the same pins.
Nice work. A little security through obscurity. :) Good point concerning following what you feel and not what you think.
Thanks... Foreknowledge of a locks internals is VERY helpful to picking, but in this case, it got me into trouble!
Great video!! Just an interesting fact: The Mul-T-Lock keyways have 4 characters: 3 digits, and 1 letter. The first digit of the keyway code determines the position of the floating pin, the next two digits state the keyway, and the last character determines the colour of the floating pin, or if there is at all. (I.e.: A 206S key has the floating pin in the second position, has the 06 keyway, and a silver floating pin :D.) Since the first half of the 206 keyway is flat and without any warding, a 006 key will fit into a 206 lock just fine, but a 206 key will not fit into a 006 lock :D Thanks again for sharing
Thanks, and thank you for sharing the info.
Nicely done my friend! Fascinating pick as usual, thank you!
Thanks.
@@lockpickinglawyer what type of deadbolt should i put on the door-- since they are al pick able which one will take the longest -- to pick maybe my neighbor may catch em
What I'm hearing is this lock was more than a half hour challenge for you.
Which in my book means noone is getting past.
The other locksmiths in my area don't bother on stuff like this.
Fantastic picking again - a pleasure to watch.
Thank you
Masterful exhibition, Thanks for the vid.
Thanks.
So what would you recommend for a consumer like myself living by his self as the best lock to put on my front door have any addition you might add for me to be safe
32 years in) and you are pretty quick my friend looks like some of the euro stuff
Great watching you do your craft. In beginning to doubt my locks. However they've paid for themselves. Is there a website I can access to see if my Mul-t-lok is UL rated or is the info on the packaging.
Thanks -- UL rated MTL's will have the (UL) symbol on the front of the lock.
Show how you pick it,with only the Core with the pins showing how the pins get coordinate
awesome job as always!
Thanks.
interesting thanks for sharing. 😎😎😎😎😎
:-)
No side pins? Kinda a simplistic mul-T-lock. Have you tried picking one with all five side pins?
Great job picking as always brother and thanks for sharing!
Awesome pick,
So the UL rating is more based off of the drill protection?
Guessing that is because the method of entry preferred by thieves is to drill a Mul T Lock?
Yes, Mul-T-Locks with the UL rating have better protection against drilling than the standard cylinders
Thanks. Boaz is correct... the UL rating FOR MTL's is based on drill protection because all of their product already meet the other requirements.
LockPickingLawyer I was really was only askingif the only variations to the UL has only the little steel inserts or ball bearing above the pin stack.
Really makes them like Master Lock more and more. I had a much higher standard for (Underwriters Laboratory)
But the only difference maker is drill protection then I might consider a different lock onnmy front doors. Lol... I understand that LPL or pickers of that caliber
will not be breaking into my house. But not every thief has or uses a drill.
Thanks for the info.
My thoughts on it mean nothing, keep up the good work.
You aren't going to drill a mul t lock with a HSS bit.
Can you show what happens when drilling one?
@thelockpickinglawyer
For reference, all you’ve got to do, is check on the opposite surface of the keyway, for the sprung nipple.
What can a picker do if no binders are present? I’ve had an E11 closed shackle, in my naughty bucket, since 2012, not one pin set ever, tried everything. I have successfully picked many mlt’s, this one has taken over a 1000 hrs from me, with zero to show from it. I believe I’m going to dissolve it in acid, to bring this nightmare to an end.
Anyone know how to make a key from a barrel
There is no perfect lock, but what are the decent locks ?
Thanks for the great video. I appreciate your exceptional lock picking skills. What pick did you use on the MTL lock and where did you buy the pick?
The pick I'm using in this video is from SpooXe... and I got it in trade. It's a german company, but their e-store has an English option.
I like it well done my friend as ushawall stiglocks..r merry xmas mannn
Thanks, and Merry Christmas to you and yours also.
Whats the difference between the multlock interactive and the interactive plus?
How does the interactive element work on these?
Is it the anti drilling?
These locks have a kill key which makes the existing key useless.
They also have keys depending on your access level.
Like manager key vs employee key. Employee key can only open certain locks and the manager key that can open all of them.
Thanks
I have a 236G keyway and was told it is an interactive plus cylinder, but when I search for anything 236G online it appears to be the original interactive model. How do I know if the cylinder I have is an interactive plus? What are the cylinder differences between interactive and interactive plus?
Longest I have seen it take LPL to pick a lock. Can you revisit this? I am curious if it is still just as good as it looks here
Think I'm going to invest in a couple of interactive cylinders
Nice vid & 'classic' picking :)
Thanks
Hi, I’m in the process of buying a home and I was wondering if you have any recommendations on deadbolts. I was looking at the Mul-T-Lock Interactive+ Cronus (Black Tie Edition) High Security Grade 2 Single Cylinder Dead-Bolt w/Thumb Turn. What do you think. Thanks for your time. Love your videos!!
Why? Do you think someone is going to try to pick your lock? Guy, this isn't the movies and dudes are sitting around with their master plan. Maybe 1% of thieves will even attempt to pick a lock, and that's a drastically high estimate. The rest will take crowbar to your door or a drill to your lock. High security locks give a very false sense of security
How do you know when it's an internal pin?
Great video!!! Question, where can I get a table vise like yours?
Well damn, was thinking about a MulT lock as it’s advertised as pick proof but then he opens it in no time what’s the point of spending that much money on a lock if it can be opened like that
Have to take into consideration the most likely thieves we come across aren't this skilled. Unless it's a targeted attack they'll move on to easier prey. Also what lock has he not breeze through?😂
so realistically if you didnt know what kind of gateway .. interactive... mt5 etc etc you would have a lot harder time? Is there something stamped on the front telling you what kind of key it uses?
Where can I find that Z bar tension wrench and is that a padlock bypass tool that you're picking the lock with?
Do you know where I could find a 206 service key like you show here? I'd like to try it on a lock that I have.
no side pines?
What about "bearlock" product? Is it safe to secure my car gear box with this? What is your opinion?
brilliant as usual !
Thank you.
Nice picking and as always great explanation,thanks for sharing 😘😘😘😘😎😎🔓👍👍👍👍
Thanks.
have you picked the MT5+ yet?
Help! My key is stuck in the lock when I was trying to take it apart... what do I do?????
huh?? I just spent everything i can afford on a mul t lock deadbolt cause it was supposed to be unpick-able? iMan i'm never leaving the house again. You are a master. Hats off to ya, please tell me that the average little punk thieves cant do that.
I just did the same. But honestly, if somebody has the specialized picks and knowledge to pick these, odds are they've got a good-paying security job, or they're a high-end jewel-thief. Either way, they're probably not going to be trying to get into some random house. At least, that's what I'm telling myself.
Cool...
Damn , I was about to buy a set of these
Whats the point of having any lock on your door? Mlti locks aren't cheap and the installation isnt cheap either. These shows of this guy picking open every lock on the market is virtually depressing. The best part of picking multi lock is its time consuming and by the time you get it opened you'll probably get caught & arrested. I believe in the 2nd amendment 100%.
Deterrence
Oh Dearest LPL I've been trying to contact you and Bill to no avail. Cannot write safely on public forum, buy need your help so badly that I can't express (water all your recommended videos, but I'm less than a novice presently just a victim! Not good for me! Please help me, I don't even have tools as yet, but have problems I'm sure you can answer. Please contact me., please...RmB
Fuck you made that look easy.... Its notttt easy lol.
you know why buy locks when you & other who ever puts it on here how to pick locks. you are just helping the criminal. what are you all thinking. no common sense what so ever
no criminal is gonna waste their time picking a lock like this
i don’t say this lightly but you’re dumb as a rock.
SuperAWaC would that still be the case if the lock picker happened to be a locksmith? That’s the situation I’m in unfortunately.