if you are getting massive packet loss, and if the wires leading up to your router are damaged, you can check check this in the router's 'optical information' tab where it tells you if something is out of the regular working range.
I got a c on the debloat. I have a nighthawk router and 1gb upload and download. On the debloat test my unloaded ms was 14 and +13 for download and +69 for upload. Is the router really at fault
I have 2gb down and up. I had to uninstall my realtek drivers because my upload speed was cut it half lol. Maybe these steps are only for 1gb and lower.
The benefits of hardwiring to a wifi extender can be if a device doesn't have 5g you can connect the extender to 5g and force 5g through an ethernet hardline to the extender. I do this for my ps3.
I got a NETGEAR - Nighthawk AX4200 and surfboard and still my bufferbloat grade is C. Could it not be my hardware but my ISP throttling me ? I also have never seen you use TCP optimizer. Do you not think it is worth it ?
Yo, since 1 week my uploadlatency is on 180ms on waveform speedtest and I cant fix it:/ Fresh install windows multiple times, reset router, switching from fibre to dsl, tried different drivers and nothing helped. When I run the speedtest on my mobile its perfectly fine, uploadlatency sitting on 10ms any ideas?
how much better is an external intel internet adapter than a regular network adapter from realtek?and how noticeable is the difference in the latency when changing?
Personally get a WiFi extender that has a Ethernet port & plug that into your pc. Setup is basically easy & once you set up the WiFi to your router… just disconnect the Ethernet cable from the pc & put it back in. then you can disable Bluetooth & WiFi. I went from 2mbps all the way to 1.0gb speed. When running a speed test I went from 30 to 160 upload Download is 25mbps. the closer you are to your router the better. downstairs i get 800mpbs & better. but i can’t put my pc downstairs so gg lol
After running through the steps in this video, I went from a D to a B. I have not updated any hardware yet. So the next step is the eero Pro 6 mesh? edit: also I do have gigabit cabling.
Hey I noticed me and another guy in this comment section have random Ethernet disconnects after applying everything said in the “Realtek PCIe GbE Family Controller Properties” window…do u know which setting could be causing this?…thx
How much better is connecting an ethernet cable from my pc to the internet router than, what im doing rn which is ethernet cable from pc to a wifi booster half way between my internet and my pc?
my realtek pcie gbe family controller is capping my ethernet speed at 10mbps which is obviously awful im hoping this video will help, been trying for hours
Yo @Xilly, what about autotuning and disabling it in cmd? I have B with modem+my router Asus RT-AX55 connection and when I disable autotuning with cmd "netsh int tcp set global autotuninglevel=disabled" it gives me A+ and 1ms latency on upload/download at max, but sometimes I feel like it gives me some backtracks in actual game. Should I rock this disabled or normal and find solutions somewhere else?
@@devinooz I agree with the author of the comment, it gives me an insanely low latency, but in the game it's like they see me in advance, rather than me. But the damage goes fine, I don't know what the problem is. With the function turned off, I have 30 Mbps, and with the normal 110 Mbps. How are you doing?
@@kingcobra9984 i tried it, but it made my download speeds go down to my upload (which was around 40) and it overall just messed up my internet so i use default
Since I made your optimizations, I suddenly get a black screen in the game. the game then tabs back to the desktop and back into the game. why is that, any ideas?
Do you know why my mate gets better ping when his ethernet speed is capped at 100 mbps when mine is 1 gb, 10x better internet speeds with direct ethernet connection and we live half a mile away from eachother?
different isp maybe? Maybe your router is struggling to keep up with the 1gbps speeds. When the router can't keep up with the speed it creates bufferbloat which will impact ping. Look up OpenWRT firmware for your router and look into using the SQM settings in it. You can also use this command, "netsh int tcp set global autotuninglevel=disabled" which will lower your speed by quite a lot but will also stop most if not all bufferbloat. The speed difference shouldn't be noticable when even watching 8k video so you will be fine with the slower speed.
I got the tp-link archer c6 v2 installed openwrt firmware and got Qos package giving the priorty to my pc ip address guys i never saw an A grade bufferbloat i swear it's always A+ you don't need to buy expensive router don't let them fool you btw this router cost around 25$ 😅
Its a good thing you charge people money, just to tell them to "try & max it out". Can't believe you charge people money & can't help them because they don't have the same system you have... lol
ethernet optimization aint gonna change that much.. since its already so fast.. but it's nice to do to get that extra 5% wifi optimization is the one usually noticable on daily normal user use.. since it could vary from 70mbps to 1000+ depends on setting and hardware 1gbps ethernet to 10gbps aint gonna noticable unless u using that for a high speed nas or something crazy like that
Receive Buffers should not be set below 256, as this may cause packet loss. Transmit Buffers must be set to 2 x RB = Rx:256 / Tx:512. Or Rx:512 / Tx:1024 etc. There are also quite a lot to set via CMD or PowerShell or Terminal. If the ipconfig settings, netsh settings etc. are incorrect, the NIC settings maybe doesn't make any difference. Oh, and make sure your modem is not equipped with Intel's Puma 6/7 SoC. If it is, it could ruin all the effort you put into optimizing your network. And I agree, don't waste your money on the so-called "gaming routers". The high price and sexy design is not worth it. There are excellent SQM compatible routers on the market for a small amount of money. For example, I have a NanoPi R4S router with OpenWRT software. I paid €85 for it and it eliminates buffer bloating better than, for example, gaming routers with DumaOS.
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
Increase your FPS📈, minimize input delay:
xilly.net
realest video i've come across, helped a lot about knowing what to look for/ what possible issues may be causing unstable connection.
very informative and straight forward in explaining things step-by-step. Truly incredible. Keep it up!
thanks brooooo have a good day!
You dropped my ping from a 40 to an 11! Thank you so much. The goat fr
if you are getting massive packet loss, and if the wires leading up to your router are damaged, you can check check this in the router's 'optical information' tab where it tells you if something is out of the regular working range.
Where do i find optical information tab?
broooo my speed went from 460mbps to 600 WOW, you deserve a mil subs asap
Great video!
Pro tip… disable WiFi & Bluetooth for better latency.
only do this if you are using a power line adapter or a WiFi extender via Ethernet to pc.
you made this video when i had my birthday and i turned 13😆
I got a c on the debloat. I have a nighthawk router and 1gb upload and download. On the debloat test my unloaded ms was 14 and +13 for download and +69 for upload. Is the router really at fault
my realtek family controller driver isnt even showinng up in snappy
Does the eero router have VOIP/Telephony to support our Provider?
What about aquantia lan 2.5gbe
i updated my ethernet controller (i226-v) and now i dont have ethernet, it is saying code 39, i am on atlas os what should i do?
use older driver
I have 2gb down and up. I had to uninstall my realtek drivers because my upload speed was cut it half lol. Maybe these steps are only for 1gb and lower.
What do I do if my ethernet doesnt show up?
Thanks for the help
The benefits of hardwiring to a wifi extender can be if a device doesn't have 5g you can connect the extender to 5g and force 5g through an ethernet hardline to the extender. I do this for my ps3.
No joke not paid to say this nothing this video got me from C to A one of the best videos I ever watched❤
What router should i get with that modem in the description ?
what if you dont have a router? i have a modem and got ethernet directley pluged in, got a score of F , can buying a router help or a new modum?
router allows you to have wifi and other services, watch my updated network guide where I recommend the Netduma R3
At 9:48 my shit is so different. is it cause i changed my dns ? BUFFERBLOAT GRADE
D btw. ima go cry
Thank you I was getting massive ping spikes in games
Thank you its like 25% faster!!
I got a NETGEAR - Nighthawk AX4200 and surfboard and still my bufferbloat grade is C. Could it not be my hardware but my ISP throttling me ?
I also have never seen you use TCP optimizer. Do you not think it is worth it ?
You need to use QOS bro
@@UKGUN1T whats that?
Yo, since 1 week my uploadlatency is on 180ms on waveform speedtest and I cant fix it:/ Fresh install windows multiple times, reset router, switching from fibre to dsl, tried different drivers and nothing helped. When I run the speedtest on my mobile its perfectly fine, uploadlatency sitting on 10ms
any ideas?
Use correct port and cable
how much better is an external intel internet adapter than a regular network adapter from realtek?and how noticeable is the difference in the latency when changing?
Nothing, i have Intel NIC and Realtek integrated, your router will have a way bigger impact on that rather than the NIC
Personally get a WiFi extender that has a Ethernet port & plug that into your pc.
Setup is basically easy & once you set up the WiFi to your router… just disconnect the Ethernet cable from the pc & put it back in.
then you can disable Bluetooth & WiFi.
I went from 2mbps all the way to 1.0gb speed.
When running a speed test I went from 30 to 160 upload
Download is 25mbps.
the closer you are to your router the better.
downstairs i get 800mpbs & better.
but i can’t put my pc downstairs so gg lol
After running through the steps in this video, I went from a D to a B. I have not updated any hardware yet. So the next step is the eero Pro 6 mesh?
edit: also I do have gigabit cabling.
Hey I noticed me and another guy in this comment section have random Ethernet disconnects after applying everything said in the “Realtek PCIe GbE Family Controller Properties” window…do u know which setting could be causing this?…thx
i have same problem every 3 min Ethernet disconnects eveen my wifi crashes
@@willnoah6497 I just downgraded the driver...I didn't feel like testing each and every setting I changed.
We're you able to fix this? If yes how ?
didnt need ipv4 checksum offload enable for receive side scaling being active?
man i love youi
How much better is connecting an ethernet cable from my pc to the internet router than, what im doing rn which is ethernet cable from pc to a wifi booster half way between my internet and my pc?
You're on Wi-FI rn basically
whats the best way to get an ethernet connected from my pc to router since its downstairs and through a door?@@Xilly
is there anything I need to do like install any drivers as ive now connected my ethernet directly from my router to my pc@@Xilly
You can just update them, I show it in this video using SDIO installer or going to your motherboards website. @@dan4k298
My ping or download speeds barely changed damn@@Xilly
my realtek pcie gbe family controller is capping my ethernet speed at 10mbps which is obviously awful im hoping this video will help, been trying for hours
go to the same place he went at 5:40 and in advanced tab find speed and duplex and have that on auto negotiation lmk if this helped😃
@@XFurious59 tried everything in this video, it could just be faulty
I got C on buffer bloat test but only got warrning on low latency gaming
me 2
Same. I coming from Germany. Germany has very Bad Internet 😅
My Speed & Dupkles only says max 100mbps full/half duplex even though the speed says 1.0 Gbps. What should i put it on?
1gbps (:
Yo @Xilly, what about autotuning and disabling it in cmd? I have B with modem+my router Asus RT-AX55 connection and when I disable autotuning with cmd "netsh int tcp set global autotuninglevel=disabled" it gives me A+ and 1ms latency on upload/download at max, but sometimes I feel like it gives me some backtracks in actual game. Should I rock this disabled or normal and find solutions somewhere else?
what did u end up doing?
@@devinooz I agree with the author of the comment, it gives me an insanely low latency, but in the game it's like they see me in advance, rather than me. But the damage goes fine, I don't know what the problem is. With the function turned off, I have 30 Mbps, and with the normal 110 Mbps.
How are you doing?
@@kingcobra9984 i tried it, but it made my download speeds go down to my upload (which was around 40) and it overall just messed up my internet so i use default
I mean I got the xr500 gaming router and my bufferbloat was a A
8:15 cat 5 have max 100mbps the cat 5e have 1gbps btw for someone to know
im on intel i use 2048 for both recieve and transmit buffers, is that ok?
The higher the better
Since I made your optimizations, I suddenly get a black screen in the game. the game then tabs back to the desktop and back into the game. why is that, any ideas?
That's normal for fortnite
@@dovydas4036 oh I didn't know that then I didn't notice it at the beginning 🤷🏻
Would this work with Wifi Network connection?
For the transmit buffers mine maxed out at 4096 do I like it on there?
same
my ethernet keeps disconnecting then coming back idk
Same did u find a fix?
Do you know why my mate gets better ping when his ethernet speed is capped at 100 mbps when mine is 1 gb, 10x better internet speeds with direct ethernet connection and we live half a mile away from eachother?
if your friend is closer to the servers than you he has better ping its that simple
he lives half a mile away from me but he gets 10 less ping on average tho@@funkyreality
@@dan4k298 I have the same problem, I don't understand why.
@@funkyrealityHe obviously just said he lives half a mile away
different isp maybe? Maybe your router is struggling to keep up with the 1gbps speeds. When the router can't keep up with the speed it creates bufferbloat which will impact ping. Look up OpenWRT firmware for your router and look into using the SQM settings in it.
You can also use this command, "netsh int tcp set global autotuninglevel=disabled" which will lower your speed by quite a lot but will also stop most if not all bufferbloat. The speed difference shouldn't be noticable when even watching 8k video so you will be fine with the slower speed.
isn't it better just to connect directly to the modem?
Alot of routers have alot of added security that you wont get if you plug it directly to your modem
I just turned off IPV6 on my TPlink router and got an A+
Bro I got a F in bufferfloat
Yo W mans
I got the tp-link archer c6 v2 installed openwrt firmware and got Qos package giving the priorty to my pc ip address guys i never saw an A grade bufferbloat i swear it's always A+ you don't need to buy expensive router don't let them fool you btw this router cost around 25$ 😅
*_DRIVER BOOSTER FTW_*
went from a b to an a+ with the ethernet adapter optimization
Bro nc video make one for Batlefild remasterd pls.thanks
Could you help me i can only get 100mbps
you have a limit of banda of you connection
I love you
tassio é vc?
i don't see my ethernet on the the app?? i see my wifi but not my ethernet
are you connected to ethernet
@@6loww I got it thanks tho
I got A but I have fiber 40€ about and ethernet internet 😅
work on customOS?
Why is your bufferbloat bad then
He just said he has a bad router 💀
password pack?
i was on 30 ping before the video, now i am getting 10-15 ping
capp
@@MilkiTwo ong
"Gives you lower latency but not lower ping"
WTF? Ping is latency, it's the latency a signal has on a round trip.
thanks, now when i load youtube or anything else, it takes 30 seconds to load
😂😂😂 good job
Thank u so much u got my ping down to 0 consistently.
Hi !
Thanks for the malware
bro i got a F
you dont want checksum offload enabled on anything!!!!!!!!!!!! @ 8:50 disabled on all
why?
causes packet loss, more latency. recieve side scaling and all offloads features should be off for best performance @@user-l3ys7sy2a
offload is also a power saving option @@user-l3ys7sy2a
@@user-l3ys7sy2a also turn off high precision event timer
Why???
I went from F to A
i got 11 ms 0ms 0ms
Didn't even mention anything bout MTU and didn't go into your ip(router admin options) to change something, hm.
1500 MTU is the best
@@maxkruppa3716can you please explain what is that and how do i modify it?
bro 100% of cpu usage
its a powerplan thats turn idle off so ur cpu cant idle so task manager bugs and that its running at 100%
Its a good thing you charge people money, just to tell them to "try & max it out". Can't believe you charge people money & can't help them because they don't have the same system you have... lol
the bouncing subtitles are very distracting and makes the video hard to watch
ethernet optimization aint gonna change that much.. since its already so fast.. but it's nice to do to get that extra 5%
wifi optimization is the one usually noticable on daily normal user use.. since it could vary from 70mbps to 1000+ depends on setting and hardware
1gbps ethernet to 10gbps aint gonna noticable unless u using that for a high speed nas or something crazy like that
Great way to mess up your home network.....Are you kidding me with this????????
I got a F😪
I got A 😅
my max speed is 100mbs haha
Lost half my internet download speed after implementing suggested changes from the video.
L bufferbloat
Receive Buffers should not be set below 256, as this may cause packet loss. Transmit Buffers must be set to 2 x RB = Rx:256 / Tx:512. Or Rx:512 / Tx:1024 etc.
There are also quite a lot to set via CMD or PowerShell or Terminal. If the ipconfig settings, netsh settings etc. are incorrect, the NIC settings maybe doesn't make any difference.
Oh, and make sure your modem is not equipped with Intel's Puma 6/7 SoC. If it is, it could ruin all the effort you put into optimizing your network.
And I agree, don't waste your money on the so-called "gaming routers". The high price and sexy design is not worth it. There are excellent SQM compatible routers on the market for a small amount of money. For example, I have a NanoPi R4S router with OpenWRT software. I paid €85 for it and it eliminates buffer bloating better than, for example, gaming routers with DumaOS.