Shame that it wasn't obvious enough to either the presenter, or the camera man, to get the bloody vent louvre out of the way for us to see the goings on
Ex Us Air Conditioning Distributor employee ......could never understand the man......but a good person..whats up Cheb........ !!!!!! Hi from San Diego Ca !!!!!!
It would be extremely helpful to see an installation video for the YUMA pump, including the wiring work. The diagram that comes with the YUMA pump is confusing to the electrician and since mini-split systems are (relatively) new in the US, not all HVAC technicians have worked with all of the configurations. So seeing the wiring work live will help--A LOT! Thanks.
Hello Fiona, Thanks for the feedback. The wiring on the Yuma is exactly the same. Just be aware there are multiple ways to wire in the pump. It all depends on how the fan-coil is powered. Either from the outdoor unit or independently powered from inside the room. All of our pumps, including the Yuma now come with a color wiring diagram packaged inside the box, along with the appropriate fuses. I will endeavor to make and post a new video on the Yuma though. Best regards, Sheb
Thanks! Also, would you mind also please m a point of reassuring electricians and HVAC technicians in the US that the small gauge pump wires will, in fact, carry the power. It seems they're not accustomed to this configuration and using such small gauge wires. Thanks again!
Sheb P Got the pump installed, and it's doing AWESOME!! Is there a filter we need to replace/clean periodically? Doesn't make sense there isn't one, so any information regarding this would be much appreciated.
If the pump was connecter previously to 120V; would one be able to connect it to a 240V source, and the pump still operate properly? (Reference universal ballasts: once the initial voltage is applied, it is only that voltage hence forth).
Hm I used to connect the safty connector between the S1. But just had a talk with a colleque. What if I cut of the S1 - The valve keeps open and condensor might freese and in the long run it coud freese so hard, it distroys the indor unit
What are the maintenance requirements for these pumps? I thought I saw something about a filter--but how does the unit come apart? Where is the filter? Where do we get replacement filters? Or do they merely need to be washed/cleaned? Thanks!
Just rinse out the filter once per year and clean out the clear plastic drain tray. Keep it clean from dirt and algae. The filter is the round foam piece that covers the water pick up that extends down into the clear water tray. Just pull the outer cover off the pump and lift up on the pump and water tray to remove from the wall back plate. Clean the filter and water tray with warm soapy water rinse out well. It also helps to wipe down the digital water sensors once a year to keep them working tip top.
Ours seems to have stopped working. The water tray is full and nothing is going out the tube. It’s making a very loud rattling sound. Probably needs to be replaced?
From your post we do not know what can be wrong with your pump. Pls take pictures of the installation, note power supply, duration of operation, installation settings with other components of the cooling system and bring the pump back to your distributor. He can analyse the operation of the pump with help of the REFCO Pump Read program. And he then decides about the next action. Thank you for your cooperation. Kind regards REFCO Manufacturing Ltd.
anyone know how strong this pump is? like can it pump water across an entire garage and out to a downspout outside? how high can it pump? or how long of a run can it handle?
Max suction 9.8 ft max head 65.60 ft max horizontal run is 330ft at zero head and 0 suction That’s the specs off the manual wish they would explain it like normal pump like 30 ft lift and such guess I will find out when I start the unit to see if it works I am going 5 feet up and 20 ft across and having it pump into 1/2 pvc running down the side of the house with my line set
Midland Texas - Last week I had a mini-split installed with gobi pump. Question? How long should the pump run? This pump runs for 15 - 20 minutes at time. The discharge line is clear but the pump is not moving much water. This one comes on an runs for extended periods of time even when the A/C has been turned off for hours. It vibrates the wall and is very annoying? Any suggestions?
Hello Richard, Normally they will only run for 10-50 seconds at a time depending on how humid the indoor air is. Running 15-20 min is definitely not correct. How high is the drain line running upwards? How big is the drain line diameter? Try cleaning the water filter and also wipe down the digital water sensors. Sometimes very hard water will leave mineral deposits that will fool the pump into running when it shouldn't. Also try to zip tie the drain line securely to the line set insulation without pinching it off. Often times the vibration noise is caused by the drain line vibration harmonics bouncing off of the inside of the plastic fan coil casing not actually the pump itself.
👎👎👎👎The most pathetic pumps I've seen.. I ran out of 5 pumps in last 1 year. The water sensor fails always with no visible dirt/gunk. Shame on this company!!👎👎👎👎
Shame that it wasn't obvious enough to either the presenter, or the camera man, to get the bloody vent louvre out of the way for us to see the goings on
Ex Us Air Conditioning Distributor employee ......could never understand the man......but a good person..whats up Cheb........ !!!!!!
Hi from San Diego Ca !!!!!!
Would like to see the discharge on the pump explained.
What does it mean if mine is making really loud gargling sound every five to ten minutes? How do I fix that?
Bombas de Condensado REFCO también disponibles en México
It would be extremely helpful to see an installation video for the YUMA pump, including the wiring work. The diagram that comes with the YUMA pump is confusing to the electrician and since mini-split systems are (relatively) new in the US, not all HVAC technicians have worked with all of the configurations. So seeing the wiring work live will help--A LOT! Thanks.
Hello Fiona,
Thanks for the feedback.
The wiring on the Yuma is exactly the same. Just be aware there are multiple ways to wire in the pump. It all depends on how the fan-coil is powered. Either from the outdoor unit or independently powered from inside the room.
All of our pumps, including the Yuma now come with a color wiring diagram packaged inside the box, along with the appropriate fuses.
I will endeavor to make and post a new video on the Yuma though.
Best regards,
Sheb
Thanks! Also, would you mind also please m a point of reassuring electricians and HVAC technicians in the US that the small gauge pump wires will, in fact, carry the power. It seems they're not accustomed to this configuration and using such small gauge wires. Thanks again!
Sheb P
Got the pump installed, and it's doing AWESOME!! Is there a filter we need to replace/clean periodically? Doesn't make sense there isn't one, so any information regarding this would be much appreciated.
It's SO quiet, yet it's pumping out plenty of condensate. I LOVE it!
If the pump was connecter previously to 120V; would one be able to connect it to a 240V source, and the pump still operate properly? (Reference universal ballasts: once the initial voltage is applied, it is only that voltage hence forth).
Sheb! Awesome video! Hope you are doing well! Beth Sorg-Pires (San Diego)
Thanks Beth, I appreciate your good wishes.
More to come on other stuff.
Hm I used to connect the safty connector between the S1. But just had a talk with a colleque. What if I cut of the S1 - The valve keeps open and condensor might freese and in the long run it coud freese so hard, it distroys the indor unit
How is cutting the pipe gonna w9rk?
Wouldnt blocking the outlet be more effective?
What are the maintenance requirements for these pumps? I thought I saw something about a filter--but how does the unit come apart? Where is the filter? Where do we get replacement filters? Or do they merely need to be washed/cleaned? Thanks!
Just rinse out the filter once per year and clean out the clear plastic drain tray. Keep it clean from dirt and algae.
The filter is the round foam piece that covers the water pick up that extends down into the clear water tray.
Just pull the outer cover off the pump and lift up on the pump and water tray to remove from the wall back plate.
Clean the filter and water tray with warm soapy water rinse out well. It also helps to wipe down the digital water sensors once a year to keep them working tip top.
This might be the worst tutorial video ever made! LOL
Ours seems to have stopped working. The water tray is full and nothing is going out the tube. It’s making a very loud rattling sound. Probably needs to be replaced?
From your post we do not know what can be wrong with your pump.
Pls take pictures of the installation, note power supply, duration of operation, installation settings with other components of the cooling system and bring the pump back to your distributor. He can analyse the operation of the pump with help of the REFCO Pump Read program. And he then decides about the next action.
Thank you for your cooperation.
Kind regards
REFCO Manufacturing Ltd.
REFCO Manufacturing Ltd.
Here is what it’s doing..
ruclips.net/video/wmuJeu5LdE8/видео.html
Its confusing wher can I put wires we need a video on how to wire please I have 1 cable with 2 wire and other cable with 3 cables
anyone know how strong this pump is? like can it pump water across an entire garage and out to a downspout outside? how high can it pump? or how long of a run can it handle?
Max suction 9.8 ft max head 65.60 ft max horizontal run is 330ft at zero head and 0 suction That’s the specs off the manual wish they would explain it like normal pump like 30 ft lift and such guess I will find out when I start the unit to see if it works I am going 5 feet up and 20 ft across and having it pump into 1/2 pvc running down the side of the house with my line set
Midland Texas - Last week I had a mini-split installed with gobi pump. Question? How long should the pump run? This pump runs for 15 - 20 minutes at time. The discharge line is clear but the pump is not moving much water. This one comes on an runs for extended periods of time even when the A/C has been turned off for hours. It vibrates the wall and is very annoying? Any suggestions?
Hello Richard,
Normally they will only run for 10-50 seconds at a time depending on how humid the indoor air is. Running 15-20 min is definitely not correct. How high is the drain line running upwards? How big is the drain line diameter?
Try cleaning the water filter and also wipe down the digital water sensors. Sometimes very hard water will leave mineral deposits that will fool the pump into running when it shouldn't.
Also try to zip tie the drain line securely to the line set insulation without pinching it off. Often times the vibration noise is caused by the drain line vibration harmonics bouncing off of the inside of the plastic fan coil casing not actually the pump itself.
Where is the line set?
My pump tries to drain the reservoir but after turning off, the water drains back into the reservoir. It's like backflow.
Install the siphon piece that came with the pump if you did flip it cause it might be backwards
👎👎👎👎The most pathetic pumps I've seen.. I ran out of 5 pumps in last 1 year. The water sensor fails always with no visible dirt/gunk. Shame on this company!!👎👎👎👎
Same here. I’ll switch to Blue Diamond pumps.
Is it too hard to close the vane of AC?????????? Cannot to see what happened behind this!!!!!!!! Dislike