Restoration FULL Engine HONDA GX160 | Restore Engine Honda Rusty
HTML-код
- Опубликовано: 25 авг 2024
- Restoration Engine HONDA GX160 | Restore Engine Honda Rusty
Restoration Engine HONDA GX160 | Restore Engine Honda Rusty
The Engine we encountered this time was old and very rusty. It has lost its carburetor. After taking out inspection inside the engine we found the exhaust valve was almost stuck, We re-polished it and tried to recover everything to the best.
The Restorator thank you once again for your interest and support.
Dear Mr/Ms
Thank you very much for your value time to Watch,Like,Comment,Share and Subscribe our videos on The Restoration Channel, and we will try all our best to find more idea as try to Create more videos to make your assist and more facilities.
If you have any idea or more convenience to support us please don't hesitate to contact with us ! i apologize for the mistake if I made this recovery!!!
Мдаа... Молотком по цапфе коленвала? - Да запросто. Цилиндр наждачкой чистить? - Легко. Хотя, может это такой метод хонингования ... Поршневую новую? - Да ну, бред какой то. Прокладку под голову на герметик? - Да как два пальца. Оцинковку стальных деталей восстанавливать - а нафига? За то алюминий красить - само то. Ну и корпус воздушного фильтра за кампанию - чтоб потом лохмотья отслоившейся краски в карбюратор летели. Доукомплектовать фильтром и армстартером - а зачем? В общем, офигенное восстановление. Для сдачи в чермет.
I started buying and fixing old GX engines during the first UK lockdown.
I'm yet to find one that wasn't repairable.
They are absolutely brilliant engines to work on and so easy to fix.
Keep doing it those that judge your work have clean hands they buy new never thinking about how things like this got us where we are now.The Old Deserve Respect!
If he really respect the old, he would at least check the clearance on those valves. He only cares for adsense which is why you see rtv for cylinder head gasket.
@TheHardiya everything in this video wrong. Impact gun on bolts going into aluminum, rtv head gasket, who paints a flywheel?, sand paper in the cylinder going vertical so he scratched the hell out of it absolutely wrecking the oil seal, put a heavily scarred piston back in, painted non prepped plastic (the air intake) so now it's gonna flake off in no time. Plus when he rotated it by hand before starting it, you could hear how crunchy it sounded. You could see it smoking from burning oil and he never put a breather hose on it from the valve cover to the intake elbow. It's a barely running piece of scrap metal
Title: engine restoration. Bro: no gas tank no filter no filter cover no recoil half mechanical parts not replaced 🤣
I agree, the rings should have been changed. In all honesty, the tolerances should have been measured. IMO, the piston, rings, connecting rod should have been replaced. If you look at frame 15:48 or when you see the rod being put back in the engine, the rod bearing surface is shot. BTW, these don’t have rod bearings. Nice job making it look nice, but the engine won’t last if it lasted an hour or less of run time I’d be surprised. You can see and hear, that engine isn’t happy
Com certeza esse motor foi jogado fora depois desse vídeo porque ele só reformou esse motor para ganhar visualizações
Good job my friend
He messed up you don't use silicone on intake or HEAD gaskets!!!!!! And that's probably the wrong type of oil
ありがとう。これは参考になるよ。Thank you for your presenting common used hard wear. GX160 is build in my high pressure water gunn
I've never seen a governor arm treated so nicely mini bike life
Great rebuild. I thought using silicon on the head gasket was a novel idea. Cheers Stuart 🇦🇺
Well folks, If you are broke in the US or live where he lives... with only what he has, this is how you do it. His Befoe and after is a bitch to look at. It looks good and it runs well. This man fed his family well on this work. It is the buyer's problem after that. It is a nice hustle. Well done Moe
se trocasse o pistão novo e os rolamentos ficaria melhor ainda mais foi umexcelente trabalho
Muy buen trabajo....eso si es ser profesional ...quisiera q hubiera mecánicos así por acá....aquí un mecánico le llevan un motor así y no quieren arreglarlo
😁👍👍
I like restoration bikes and enginers.
Engine surging, carb needs complete rebuild, piston BADLY scored and requires replacement, bearings need replacing and ignition needs replacing. This was strictly a cosmetic build, not and engine restore.
exactly, i was gonna comment something similar. just because you paint a motor, doesn't make it a fresh motor.
It's a Honda, it's gonna run anyway.
Isso Air irmão bom trabalho nota 10 pra vc
Otro gran ejemplo de su habilidad en la restauracion, quedo excelente este motor Honda GX160, mis respetos y saludos desde Venezuela.👊👍
excelente video ruclips.net/video/3VD4XviqPaw/видео.html
very good restoration
Dentro do conhecimento da qualidade profissional em qualquer profissão é de muita importância você sempre trabalha com atenção em todos aspectos isso é fundamental na vida profissional sempre adquirindo em todos conhecimento com paciência sempre no que você vai fazer de melhor pra você e as pessoas que vão sempre precisar do seu serviço profissional trabalhando com muita atenção um bom profissional sabe da valor eu parabenizo você amigo e tirou o chapéu pra é desta maneira que somos visto
Quá tuyệt vời. Làm thêm nhìu video nữa cho mọi người xem nhé
no soi ipocrita nunca ago un comentario pero yo jose flores de aqu venezuela les digo DIOS LOS bendiga tremendo trabajo
Looks good on the outside but I hated seeing that scored piston go back in it.
I enjoy doing these types of rebuild
Tired of 57 years of diesel mechanic so I can’t just quit working
The piston was upside down the dot always faces the top of the engine. But good job
👀
funny he put grease on the crank shalf bearings. lol. those swims in oil, in the crankcase. lol
anyway great COSMETIC restoration.
also damaged piston. lol
Don't worry when oil is added, grease definitely will be washed out
VERY GOOD RESTORATION...CONGRATULATION AND THANK FOR VIDEO
i can fix and make run but to restore im not at your level.You do great work.
love the video
❤
you missed gaskets on the carby
Great job sir... 👍👍 i am a big fan of you. 😊
U
You didnt change main bearings,piston rings,putting old head gasket....that isn't restoration...only cleaning engine
Restoration is subjective. Turning an engine from an unworking filthy water contaminated hulk of scrap to an engine that works is restoring it, it may not be your vision of restoration, but it is restoration.
The bearings sounded mostly fine. The rings were obviously a bit worn, but with the amount of pitting on the cylinder walls, changing them would be pointless. You can reuse graphite head gaskets on small engines if they're not damaged. The only thing that sounded bad enough to worry about is the centripetal clutch.
)
공간차는것이찻다는거시 몰라서모하겠으요
I need to restore my iphone 6s will you help?
I agree, the rings should have been changed. In all honesty, the tolerances should have been measured. IMO, the piston, rings, connecting rod should have been replaced. If you look at frame 15:48 or when you see the rod being put back in the engine, the rod bearing surface is shot. BTW, these don’t have rod bearings. Nice job making it look nice, but the engine won’t last if it lasted an hour or less of run time I’d be surprised
@@Bulletman426 yeah. Replacement conrods, gaskets etc are all pretty cheap too. And spraying it silver ffs! Horrible.
Restaurar no es sólo lavar y pintar. Faltó bruñido de cilindros, pasarle esmeril a mano es una Burrada, faltó cambiar piston y aros, cambiar a asentar válvulas, cambiar estator, cambiar todos los rulemanes , sellos desarmar carburador y cambiar punzuar, flotante, y todas las juntas destapar chicler de alta y baja . etc etc etc
Trabalho maravilhoso parabéns.
Good
Bagus bos Santi👍
Два разных двигателя.
И планка газа была черная на двигателе который не завелся и светлая не крашенная на том что завелся.
Nice job on that engine. Thank you for making & posting this video. God Bless. td\.
Muito bom, mas deveria ter trocado o pistão e os anéis por novos.
Nên tẩy vỏ máy bằng nhôm cho sáng, không nên sơn bạc, sơn vậy không đẹp.
Что? Реставрация? Хорошо покрасил называетсч
Под прокладку головки герметик немажется.
MUY BUEN TRABAJO
Good job
Very good
thank you so
Amazing great restoration 👍👍👍....
Serviço ótimo nota 9 Brasil
You forgot to install the fan.😮
Not bad at all , What are your fluid's you use , I know one is gas for the carburetor, what is the others you use for cleaning?
္
A xít
You are so excellent
Headgasket with silicone? Piston is also damaged. You also painted the oil filter lol
thanks share this video
Awesome work!
I've rebuilt many engines the last few years and never put silicone on the head gasket
gasket maker
It increases compression
Para empezar esta todo bien pero a la parte donde echaste silicona va una empaquetaduras y los metales no se golpean porque quedan encabezados
Good!
Om swastiastu suksma.
Nice 😁👍👍
Buenas noches amigo que buen video amigo una pregunta como es la bomba de aceite
You need to do a performance build!!
Can I sponsor this guy to come to the United States
Yes, and then you can have more crap taken apart put in a bucket of water painted and put back together more crap than before.
Keren banget!
Good soopar
always used w40
Отличная работа!
отвратительная работа, посадка под сальники не отполированна, люфт шатуна не проверен, плоскость не притёр, посадил на еб*чий герметик, и регулятор оборотов стоит мёртво- он его не настоил, хода тяги нет- карбюратор богатит как с*ка. Я эти моторы ремонтирую не один год, одной рукой без глаз разберу и соберу. Его реставрация лажа полнейшая
Good ❤️❤️👍👍👍
restoration no half assed repair
Holy shit get a bottle hone for the cylinder wall Jesus with the sandpaper
Un buen video
You put gasket maker on cilinder head wow🤦♂️🤦♂️
Yo estoy restaurando una motobomba con el mismo motor y la verdad que es entretenido,al igual ver como este vato lo restaura👍
buen video ruclips.net/video/3VD4XviqPaw/видео.html
Thanks now I would be able to fix my imaginary motorbike
Awesome👍
Hola amigo, que es ese liquido blanco del caneco rojo donde echastes las partes del motor. en el minuto 14. Gracias.
Buenas noches, si es tan amable en ayudarme o informar porque mi motor Honda GX240 4tiempos estaba trabajando y de repente se apagó y revisando se encuentra libre el arranqué donde calza el yoyo, el yoyo está bueno, es donde calza el yoyo que se liberó y no tranca para dar el arranque está liberado da vuelta libremente, con su experiencia que será la falla.
Fire 👌🏻
Nice work keep it up 👍
This engine is not going to last if it’s used for anything other than a display yes I may run now but under load it’s not going to hold up scaring on the connecting rod and piston you didn’t reface the valves or replace the head gasket and intake gaskets other than that good job it went back together correctly
வணக்கம்
Good morning
Good work brother
Thank you
2022/11/05
Hii
Good
Engine vibrating when it started
Нано теxнология! Респект!
ngan nuoc ji ma trag z ban
Very nice work. Beautiful. Thank you.
New 👍
Vải ráp ngược pít tông luôn
Good job,but it's time to cut the nails,😂😂😂
Same thought throughout the whole video😆😆
Yep....scary thumb nails..
Very goood very nice.....💯💯💯
Nicevideo
Dette er ikke en renovering. men en skilles ad, males og samles igen
You skip some vitals installation like the valve and 2 stroke even when fixing the rince to the piston you skip it those are 2 major parts for anyone to learn fast what you just did here is rubbish okay except for those that have not touch engine before they won't understand
Amazing
ขอสอบถามหน่อยคับ ว่าเครื่อง13แรงสภาพแบบนี้ใช้เงินเท่าไรได้ครับ
very good job !!!!
I saw he put back the same worn up piston back in the engine. I would replace the bearings and piston rings with honing the cylinder walls also connecting rod . That’ll be a complete rebuild. I just don’t understand that this guys motive when he was rebuilding this engine.
Dung dịch rửa máy va xúc bình xăng là loại gì bạn
Wow runs like a new one! Great job buddy!!! I want to wish you and yours a very happy merry Christmas! from my family here in the Philippines....
Muito bom
Deja vu ???
All great and that good job but i am not a fan of that head gasket 😬😬 a lot of this also looks very bodged, you could of got some cut out gasket or smothing. Like bruh where is the carb gasket, you are also missing the breather pipe that goes from the valve cover to the carb
It's not a restore if you reuse the old bearings.