When you put the tool box on Larry I said to myself all he needs now is a 8ft whip and low and behold you pulled one out and threw it on there 😂 100% bubba now 🤠
Also man, a quick tip for mounting tools boxes. If you dont want to drill holes in your box and bed. You can get some industrial strength velcro from ace or lowes and use that, and I promise it will not move an inch. You could roll your truck over and it wont go anywhere.
I really love your truck especially that 2 tone, it's exactly like mines, same year, but it's silver, what you need now is some fender F-150 led emblems lights preferably the multicolor choice chrome finished leds, clear, amber, red. Look up Reccon Accessories out Florida. They certainly would look nice on your truck, they dont have any for 02, but I still made them fit on my truck, I think went with 2011 f 150, and up, you will have to drill a small hole on your fender. Thank you for sharing this with me 😊 NICE ✌️🤠👍
That toolbox looks like it’s pretty nice. You can buy a new UWS emblem for around $7 off their website. The truck is looking sweet man, I think a 1 or 2” coil spacer up front would set it off even more
From a technical standpoint, that's actually a pretty good location for the antenna. Most of the radiation is from the lower 50%, and that mounting doesn't shield (metallic) it much. Those are generally 102" without spring, and 108" with. If the base is more than about 4' above ground, you may have some overhead clearance issues.
Should have mounted the antenna where it wasn't grounding itself out, just in case you ever decided to use it for something instead of a useless decoration.
Do you still have the tractor tires? Put them on Larry if the bolt patterns match, I think it would look cool! Send that truck through a mud whole and where’s baby squat?
Probably a stupid question but I’m new to cbs and stuff like that and I’m gettin one soon. How is the antenna dragging along the fast food roofs and stuff and does that damage it?
I do have a question with the toolbox do you have to slide it all the way to the front of it or could you leave a little gap between the bed in the toolbox like if you want to put two flags right there
I’m getting a 3 inch motofab leveling kit and was wondering if I should get motofab upper control arms to make sure everything fits right? or what brand should I go with?
Good classic wheel for that era👍. I picked up some fuel vector bronze 18x9 +1 offset for my 19' z71 LD. 18' body. And 3"F & 2" R motofab. Be on next week or so. No "squat" for me though lol
When you put the tool box on Larry I said to myself all he needs now is a 8ft whip and low and behold you pulled one out and threw it on there 😂 100% bubba now 🤠
I like how you don’t care what’s in stile or what people say, you just do what you like
That’s what the truck game is supposed to be
all about
I think some new headlights and taillights would treat ole Larry right
One of the best trucks!
loveeee the whip that thing is niceeee. good ole throwback truck
Tint idea for Larry, 😎 Ray Charles 5 over 20 special 50 down the shield. (Can barely tell it’s tinted when your windows are down.)
TPN I agree to 💪🏻
Lookin good man. Just needs tint now
Also man, a quick tip for mounting tools boxes. If you dont want to drill holes in your box and bed. You can get some industrial strength velcro from ace or lowes and use that, and I promise it will not move an inch. You could roll your truck over and it wont go anywhere.
I really love your truck especially that 2 tone, it's exactly like mines, same year, but it's silver, what you need now is some fender F-150 led emblems lights preferably the multicolor choice chrome finished leds, clear, amber, red. Look up Reccon Accessories out Florida. They certainly would look nice on your truck, they dont have any for 02, but I still made them fit on my truck, I think went with 2011 f 150, and up, you will have to drill a small hole on your fender. Thank you for sharing this with me 😊 NICE ✌️🤠👍
Throw some tint on old “Larry”
That toolbox looks like it’s pretty nice. You can buy a new UWS emblem for around $7 off their website. The truck is looking sweet man, I think a 1 or 2” coil spacer up front would set it off even more
The ole whip is the perfect add on for sure! 👌🏼 #watchmewhip
I think a grill guard is going to look good man
Squat, tint, spacers, and headlights and taillights. you'll be set!
From a technical standpoint, that's actually a pretty good location for the antenna. Most of the radiation is from the lower 50%, and that mounting doesn't shield (metallic) it much. Those are generally 102" without spring, and 108" with. If the base is more than about 4' above ground, you may have some overhead clearance issues.
Should have mounted the antenna where it wasn't grounding itself out, just in case you ever decided to use it for something instead of a useless decoration.
Headlight plans? And yes squat it!
Put Some clear headlights on Larry and some dark tint, love the whip btw 😂
Must say that's a sweet ride there.. what's your handle? over ..
My favorite truck on your channel. #bubbatruck
Do you still have the tractor tires? Put them on Larry if the bolt patterns match, I think it would look cool! Send that truck through a mud whole and where’s baby squat?
Still have a radioshack about 20 minutes from my house. Got one in the middle of Cullman Al
I think some tint, squat, and a brush would look good
Dope video keep up with the good job with this truck 🔥
Some nice dureetracs
Take the bug guard off, tint, headlights ,taillights and squat that bad girl!
Man it looks great!
You need another Obs, maybe a Tahoe this time
I would like to get one, completely stock this time.
lmfscrew hmm Tacoma?
Take the door moldings off, looks a whole lot better
Probably a stupid question but I’m new to cbs and stuff like that and I’m gettin one soon. How is the antenna dragging along the fast food roofs and stuff and does that damage it?
That whip makes it.
You gonna do the tint and throw a light bar in that slot in the bumper?
great video, where did you buy the whip?
Slam the rear fender on the tire🤘 take the blocks out and throw in some drop shackles
Yessir I was thinking the same thing🤙🇺🇸💯
Yess
Agreed 💪🏻
Not that gay squating crap that makes a truck useless as Well as ugly
@@bennettbritton4029 squatted trucks are gay
Where did you get the whip from?
I do have a question with the toolbox do you have to slide it all the way to the front of it or could you leave a little gap between the bed in the toolbox like if you want to put two flags right there
Shit I knew it was a bubba truck😂 now you need no cats and straight pipes and da squat
I’m getting a 3 inch motofab leveling kit and was wondering if I should get motofab upper control arms to make sure everything fits right? or what brand should I go with?
Yessir tint Larry
Shit looks good
Send the bubba and get ya a ranch hand and some tint😂
BUBBA TROK 😎👌🏽
Hell yeah
Good classic wheel for that era👍. I picked up some fuel vector bronze 18x9 +1 offset for my 19' z71 LD. 18' body. And 3"F & 2" R motofab. Be on next week or so. No "squat" for me though lol
whered u get the antenna...? looking for one myself so I can finally make my truck a bubba truck
Did you ever find one I’m also looking for one
Black mesh grille and new lighting
Light bars
Do you think you can send me a link to get the whip?
where’d you get the whip?
If you put black bumpers (offroad/work truck) itd tie in with the tool box
Where can I get a whip antenna bro?
What size wheels and tires do you have
What kind of exhaust setup is on there
where did you get the whip?
Only one radio shack I know around me is in Robertsdale Alabama
Squat 🙇♂️
Needs a billet grill with clear headlights
Ima just mount my whip to the straight truck bed
where u get the whip
I got an 8 and a half foot whip on mine
2nd comment today I love your videos and yea anther obs Chevy
Squat and tint
I got a 13” cb antenna in my truck
Go full send, 5%sheild, 2 layers 5 front to back 😎😎😎👍🙈🙈🙈
I have a question
Headache rack with the toolbox
I thought it was a cb whip when you said you hadn’t had one since high school
What's the name of the rims and the tires
Where do you get the money, and time?
Work for it.
You need spacers in the rear
When’s the tint going on Larry
Should be next week!
Hell yea
I'll take old Larry,or old Duramax ,when you're done with them,, let them shine and retire at the Sunshine State, lol
can some explain where to get the mount
Amazon is where I got mine
@@boejiden9493do you have the link or know what’s it called so I can order mine ?
Link for the whip antenna ?
Amazon look up 102" SS whip
go light next and drop shackles
Tour rims what inch" ?
Yee Yee truck
Bubba troke💯
Does anyone know where I can get a antenna like that online?
I’m trying to figure out aswell
@@devinstrohl5558 i found it on amazon
You gotta squat it man.... Tho er back on tha tar
Do double 5 on Larry
Take the bug guard off the hood and TiNt the WiNdErs!
Squat it and let the back tires rub 😎. You ain’t rubbing, you ain’t riding
Its going to rub bad still.
Please squat it do it for the haters gotta be a real bubba truck
flipped block and take a leaf out
Get and build another obs 🤟🏾
Needs tint
Clear head lights led tails 1 inch drop shackle and tint and nothing else 🙅🏻♂️
Ranch hand
Squat it🙏
#bringwhipsback
SQUAT THE FORD!!!
Slam it on the tire
Sit it on the tire
and squat it
Nah just put 3 more inches up front
squat it
Buy new head lights
Squat it
take the cats out