With the sun setting in the back ground at angle makes Larry look so good buddy. But I’m glad I seen this video just now for the wheel spacers because the back tires on my lariat are barely showing.
Thanks for the video and your thoughts… I just want to do it so I can buy some oem 6 lugs to replace the oem 16’s .. the Amazon ones you referenced.. would you say ok if truck is all stock and I bump Up to say 17s 18s etc
Idk much about this truck but it's being given to me by my uncle . I want the tires to stick out jus alike yours. How many inches do you recommend? Where I live there's alot of snow but only during the winter months after halloween . and I know lifting it would prolly be smarter . It's at stock height. I really like the look of your truck and want mine to look jus like this one .
Great video man. Loving the way Larry is turning out so far. Maybe take the side moldings off? Then billet grille insert and clear headlights. Just a couple suggestions. Keep up the good work 👍
I’m a little confused here..... I have an 02 a Supercrew 4x4. If I were to put 2” spacers all around all four tires would be sticking out the same correct?
Hey man, got a real question. In what order did you do all of these upgrades? Ive got some Harley davidson shackles and front springs. That im hoping will give me almost 2 inches. Did you do anything to the front suspension? Or just shackles the back? And also. Only spaced the back? I watched the video but im kind of confused. If you could get back to me. Thank you.
Hi, what lug nuts did you use for your stocks? Where did you get them from. The stock bolts on my 02 F-150 has a lip on them and will not fit through my adapters.
Ok, question. I’m going to buy lug nuts M12x1.75 but if I buy the wheel spacers would it need different lug nuts. The Bora ones you bought does it use different lugs?
U think they can handle off roading like a prerunner and hitting small jumps or na . I got 2 inch and 3 inch haven't had a problem but Wana built it as a prerunner but don't Wana lose the stance. But now looking for performance somebody make a vid jumping with 3 inch spacers
It's my birthday, leave a like on the video!
lmfscrew happy birthday
lmfscrew happy birthday bro
HAPPY BIRTHDAY 🎂🎉🎊
Happy birthday 🎂
Happy birthday
I think some clear headlights would look good. I’m a huge GM guy but i really like this build, ready to hear larry louder
I put new headlights in mine looks crazy good
So glad I found this channel. Haven’t found anyone else building a 10th gen on here. I’m doing a complete body swap on mine. Gotta love the salt belt😂
I would love to see some new headlights and tail lights on Larry! I'm a GM guy myself but, that truck is clean. Cheers from TN man!
FINALLY!! Looks good bubba. Happy birthday, dilly dilly!
Clear head lights would make Larry look so much better
Happy birthday
Happy birthday man truck looking better every video.
Happy bday man! Cant wait for the shackles & kittyless larry 🥳
With the sun setting in the back ground at angle makes Larry look so good buddy. But I’m glad I seen this video just now for the wheel spacers because the back tires on my lariat are barely showing.
Happy birthday bud, can’t wait for more on Larry this is definitely one of fun builds but stay safe on ya bday bud💪🏻
Also, replace the headlights with some Lightning reps
Chevy fan but yes enjoying Larry's simplicity
Happy Birthday! Keep posting Larry vids, i love em!
Clean simple look. Great looking truck.
Happy birthday love the truck looks mean af with them spacers
Yita motor makes the floor mats i got in my 18 silverado i love them. Also wrap headliner in camo make a vid of it
It makes sense to use hub centric if you think about it . How many wheel and tires are hub centric? Not all and they do just fine .
Happy birthday bro loving all the vids
What size are those tires?
Clear headlights would look clean...happy birthday bro!
Happy Birthday. Truck looks nice. Cool stance.👊
Great build so far. Definitely do 2in setting on the drop shackles. Some all clears up front and 8k hids would be sweet.
Happy bday! Larry is looking just like mine now I have the same exact setup looks sick
I’m a Chevy guy all day but damm I’m diggin Larry 💯
Thanks for the video and your thoughts… I just want to do it so I can buy some oem 6 lugs to replace the oem 16’s .. the Amazon ones you referenced.. would you say ok if truck is all stock and I bump
Up to say 17s 18s etc
Idk much about this truck but it's being given to me by my uncle . I want the tires to stick out jus alike yours. How many inches do you recommend? Where I live there's alot of snow but only during the winter months after halloween . and I know lifting it would prolly be smarter . It's at stock height. I really like the look of your truck and want mine to look jus like this one .
I dig the hell outta Larry.... happy bday homie
what site did you get them off of
Happy Birthday bud, Larry lookin THICC!!!
Hey do you have a link for the spacers maybe?
I really like all your videos
Great video man. Loving the way Larry is turning out so far. Maybe take the side moldings off? Then billet grille insert and clear headlights. Just a couple suggestions. Keep up the good work 👍
This is exactly how I want my truck to look.
I’m a little confused here..... I have an 02 a Supercrew 4x4. If I were to put 2” spacers all around all four tires would be sticking out the same correct?
Yes. This has a spindle lift that widens the front track by 2 inches so two inch rear spacers make them even again.
Hey man, got a real question. In what order did you do all of these upgrades? Ive got some Harley davidson shackles and front springs. That im hoping will give me almost 2 inches. Did you do anything to the front suspension? Or just shackles the back? And also. Only spaced the back? I watched the video but im kind of confused. If you could get back to me. Thank you.
Good job 🎉
Great video I've been trying to find out what is the torque down and I can't find it do you know how much pounds should it be torque down
That thang looks sick I have the same truck but mine's 4x4
Looks good!! I got 2 inch with bf ats on my 984x4
Have you seen a difference in gas and power output with the bigger tires?
Hi, what lug nuts did you use for your stocks? Where did you get them from.
The stock bolts on my 02 F-150 has a lip on them and will not fit through my adapters.
Ok, question. I’m going to buy lug nuts M12x1.75 but if I buy the wheel spacers would it need different lug nuts. The Bora ones you bought does it use different lugs?
Where did you get your rims with that much offset? I can’t find any.
Happy birthday bro hope it’s a good one!! 🤙🏻🤙🏻
I’m Wanting To Put These On My Truck Where Did You Order These?
What’s the wip for?
I cant find these spacers
Love You truck 💯✌️
I did truck like that and is exactly the same truck and back tire on passenger side is wobbling some I can’t figure out why ?
What size lift do you have I wanna order spacers but don’t wanna waste money
Whats the size and width of Larry's tires
Where u get the spacers at can’t find them in that size lug pattern
I’m pretty brand loyal but that ferd is clean for a 2wd
What side are those wells?
what number of tires do you use ?
Where did you get those bed rail caps? I can’t find anything decent for my 01 super crew
Whats the exhaust setup on the truck?
Look berry good 👍👍
I can not find the wheel spacers you showed in this video.
What’s the exhaust setup u have on ur Chevy I want one for my 2014 gmc serria
Hey bro, do you by chance have the link to the same wheel spacers that you got?
what kind of rims and tires are on it?
The spacing is like that so you don’t fall into ur own rut running spacers makes it look better but not perform as well in mud
That is not the reason. Both tires will easily be in the same rut with or without spacers lol
Happy birthday Screw 😎
Where can I get them wheels at
What size tires are these ?
What’s wheel and tires are on the white 1997 gmc?
What type of wheels are thosr
Happy birthday brother👍🏽
Whats the wheel size off set ? ??x??
Looks good but front still out farther. 2in would have been the ticket. Thanks for sharing.
It’s clean man
New headlights?
What website did you go to buy these?
Do you have a link to these??
I'm bout to buy a mother 98 ford f150 size of exoust is it jw and thanks bro
Thanks for the video man
Could you give me the link to the wheel spacer
If u got a 2wd I need u to tell me where to get spacers frm cause I’m having a not so easy time finding em🤦♂️
Happy birthday dawg
I got 3 inch in the rear and 1.5 inch in the front
10 gen f150 are gonna be popular in a decade or so
Needs a dog box now
Happy birthday 🎂🎉🍁
Does anyone have the actual link to purchase them? I’m wanting to buy some for my truck 🤙🏼
Happy Birthday!
Do 1.5 level from daystar, lightning headlights, and get bumper with fog lights
Happy b-day and when you pulling the blocks!?
Larry actually didn’t come stock with blocks!
U think they can handle off roading like a prerunner and hitting small jumps or na . I got 2 inch and 3 inch haven't had a problem but Wana built it as a prerunner but don't Wana lose the stance. But now looking for performance somebody make a vid jumping with 3 inch spacers
Where did u get these I can’t find them and need them
custom offsets, amazon, eBay. Lots of places just make sure you get quality ones and torque properly
@@lmfscrew I’ve looked on all of them and have found nothing I only want bora ones
Happy birthday 🎂
Yesss🔥
Where's the duramax at
Sold it, check a few videos back.
Do other 2006 Ford F-150
Could u do my truck looking like that bro it’s the same truck 2001 f150 xlt 2wd
Straight pipes and drop shackles
i put lug centric spaces on my 2003 ford f-150 same body style as yours and they HOP SO BAD GET HUB CENTRIC SPACERS
Happy birthday
DONT SQUAT IT DUDE!!! ITS A GREAT LOOK NOW.
Happy B Day