Truck is looking great man! Loving the dad jokes you threw in there as well. As someone with an almost 2-year-old daughter, I love how quickly you answered "no" to her asking to walk a mile to her friends house.. you can never be too careful when it comes to those things.
Okay! Today I had the 1.5 spacers installed on my Silver 2021 F150 and I’m very happy with the stance it gives my truck! It looks just like your F150! Same oem rims! Thanks for posting the content on your RUclips channel!
Spacers are being delivered today! I don’t have the tools to install so I’m having my local home town tire shop installing them. By the time I purchase the tools and my busted knuckles, subjecting my neighbors from me bending over and showing my plumbers crack and a whole lot of swearing it’s just easier to have the tire shop do it for a 100 hundred bucks!
@@brianjordan8675 it’s an XLT sport with the black appearance package. It’s an oddly optioned truck with the factory black wheels and that grille and not. Appreciate it man
Great video man, the truck looks awesome! I just bought a 2023 Lariat with the 20" sport wheels. I am looking at swapping to the same size tires you have and I want to add wheel spacers as well. I've done some reading on the forums and it looks like 1.5 inches sticks out a bit further on the new gen trucks than it does on yours. Do you know if they measurements are different for the 14th gen? Trying to get that flush look like you have but don't know if I need 1.25" or 1.5". Thanks!
Thanks man! They might be. The new trucks don’t have factory fender flares like mine, so I could see it being a little different. I don’t know exactly which ones you’ll need to be flush though, you should be able to run 1.25” spacers on your factory wheels if they have the pockets on the back of the hub like mine do. If you order them on Amazon like I did you could always return them if they don’t give you the fitment you like. Wish I knew the exact answer for you though. Good luck!
@zstampe Did you end up having to cut/trim the crash bars or valence at all? Good looking truck, im also going for that OEM+ look but if i have to cut the crash bars im thinking then i may as well go bigger maybe. Thanks
Same look I was going for too. I didn’t have to cut anything and have no rub. Also my wheels have indents on the back side so I didn’t have to trim the studs either
Hey, I have a question on stock F150s aren’t the front two wheels poked farther in then the wheel well then the rear two. After your one and a half inch spacer on all four wheels the front two look like they are poked out more then rear
What I got outta this video is this guy is a great dad💪👍 provide & protect🎖
Best YT comment I’ve ever had my friend, appreciate it 🤙🏻
Truck is looking great man! Loving the dad jokes you threw in there as well.
As someone with an almost 2-year-old daughter, I love how quickly you answered "no" to her asking to walk a mile to her friends house.. you can never be too careful when it comes to those things.
I’d rather take time out of my day and drive her vs crossing a busy road, you know?
Okay! Today I had the 1.5 spacers installed on my Silver 2021 F150 and I’m very happy with the stance it gives my truck! It looks just like your F150! Same oem rims! Thanks for posting the content on your RUclips channel!
This is what I will be doing to my 2021 F150! Great info on the install and the type of spacers you used! I have the exact same oem wheels!
Spacers are being delivered today! I don’t have the tools to install so I’m having my local home town tire shop installing them. By the time I purchase the tools and my busted knuckles, subjecting my neighbors from me bending over and showing my plumbers crack and a whole lot of swearing it’s just easier to have the tire shop do it for a 100 hundred bucks!
Your truck looks amazing! I have the same color in a 2019. I’m gonna get those spacers also. I love the stock also
Just did a 2.5” leveling kit and 1.5” spacers on the stock 20” wheels and tires. Love it!!!
I can't tell what trim level you have, Is that the stx grill or aftermarket? Sharp looking truck for sure.
@@brianjordan8675 it’s an XLT sport with the black appearance package. It’s an oddly optioned truck with the factory black wheels and that grille and not. Appreciate it man
What wheel set up did you run? I’m currently on 295/60/20 . I’m close to adding spacers but I’m concern about rubbing on anything .
@@CHRISTIANESCOBEDO-bt4yb just the stock black sport 20’s how much are you leveled
Great video man, the truck looks awesome! I just bought a 2023 Lariat with the 20" sport wheels. I am looking at swapping to the same size tires you have and I want to add wheel spacers as well. I've done some reading on the forums and it looks like 1.5 inches sticks out a bit further on the new gen trucks than it does on yours. Do you know if they measurements are different for the 14th gen? Trying to get that flush look like you have but don't know if I need 1.25" or 1.5". Thanks!
Thanks man! They might be. The new trucks don’t have factory fender flares like mine, so I could see it being a little different. I don’t know exactly which ones you’ll need to be flush though, you should be able to run 1.25” spacers on your factory wheels if they have the pockets on the back of the hub like mine do. If you order them on Amazon like I did you could always return them if they don’t give you the fitment you like. Wish I knew the exact answer for you though. Good luck!
No worries man! I figured it’s probably something I’ll just have to test out. That’s a good point about the fender flares. Thanks for the feedback!
@zstampe Did you end up having to cut/trim the crash bars or valence at all? Good looking truck, im also going for that OEM+ look but if i have to cut the crash bars im thinking then i may as well go bigger maybe. Thanks
Same look I was going for too. I didn’t have to cut anything and have no rub. Also my wheels have indents on the back side so I didn’t have to trim the studs either
what did you torque them to
165 lb feet if I remember right
Nice I might do the same for my 22 Lightning pro
Should look awesome man!
Hey, I have a question on stock F150s aren’t the front two wheels poked farther in then the wheel well then the rear two. After your one and a half inch spacer on all four wheels the front two look like they are poked out more then rear
@@treyrobinson7507 they’re about the same front and rear. You can’t tell the difference by looking at it in person
Hi. Nice truck. What tire size your truck has? Any lift, leveling kit?
Thank you! I’m running 275/65/20’s and a 2.5” level
What leveling kit do you have
@@CandyMan69007 just a spacer lift on Amazon I think it was KSP or something
Hello, don’t would look better and more Raptor similar if using 2” spacers ?. Please reply, because I’m very close to do it. God bless you. BR
@@martintorres7129 I dunno, it also depends on the width of your tires. I like these because they’re nice and flush