I don't recommend anyone to do this, This type of acid is inexpensive and very economical, about 2 to four 3 per liter, (Depends on the type,Powdered version also available) and you can make at least fifty projects with it. You just have to be careful, don't spill it on metal surfaces, and use gloves.
Greetings, (If) the problem is with the ignition system, you should use a CDI unit with a rev limiter. I am currently having trouble building this project. You can use similar examples, but before that, you should check the fuel system. It may be a problem with the carburetor or injector. In engines with ECM, this is a common problem, it is software-related, and it must be fixed with a diagnostic device.
@MrWolfDiy Cevabınız için teşekkürler. Karbüratörlü 2 keihein vardı. 100km 5 litre tüketim vardı. Tek sevingway PZ 27 yaptım 100km 3,6 litreye düştü rölantisi düzeldi. Son hız değişmedi. 1-2 ve 3. Vites hızlanması ve devir çevirmesi çok iyi. Dişli seti 16. 34 ten 16. 30 yaptım buna rağmen 1 ve 2. Vites kesici olmadığı için çok fazla devir çeviriyor. Elektronikciden yardım alacağım.
can it be done using inkjet ink? or should it be pigment ink? printer?
Hi, The printer in question must be a laser printer or one with pigment ink. Inkjet printers do not perform well on label and glossy paper.
Nop.Tried and failed.
Hey I am hear 🙌. Where is 2 stroke bike rpm limite cdi project.
Unfortunately, I am currently having problems building this project. I am looking for a suitable circuit for this project.🙏
@MrWolfDiy god bless you 🙏🏻
Could the copper be cut with a sharp knife and peeled? Id rather not buy chemicals for one or two jobs.
I don't recommend anyone to do this,
This type of acid is inexpensive and very economical, about 2 to four 3 per liter,
(Depends on the type,Powdered version also available) and you can make at least fifty projects with it.
You just have to be careful, don't spill it on metal surfaces, and use gloves.
@MrWolfDiy $16 for 500ml
I bought two one-liter bottles for about $3 each, two years ago, so it's probably more expensive now🥴
Selamlar mekanikciyim elektronikten cok anlamiyorum. 2 silindir 250 cc mondial MCT var. Kucuk viteste cok devir çeviriyor nasil kesici yapabilirim.❤😊❤
Greetings,
(If) the problem is with the ignition system, you should use a CDI unit with a rev limiter.
I am currently having trouble building this project. You can use similar examples, but before that, you should check the fuel system. It may be a problem with the carburetor or injector. In engines with ECM, this is a common problem, it is software-related, and it must be fixed with a diagnostic device.
@MrWolfDiy Cevabınız için teşekkürler. Karbüratörlü 2 keihein vardı. 100km 5 litre tüketim vardı. Tek sevingway PZ 27 yaptım 100km 3,6 litreye düştü rölantisi düzeldi. Son hız değişmedi. 1-2 ve 3. Vites hızlanması ve devir çevirmesi çok iyi. Dişli seti 16. 34 ten 16. 30 yaptım buna rağmen 1 ve 2. Vites kesici olmadığı için çok fazla devir çeviriyor. Elektronikciden yardım alacağım.
Professionals send their design to china and get perfect pcb's back within a week for a few dollars.
For major manufacturers yes, it is very cost effective.👍