After throwing away numerous washing machines over the years, since iv started building and flying drones, planes ect. Iv decided to remove the motors from them now before scraping. Thinking there's bound to be a use for it. But never knew how to power it. But now I do. Thanks. Just need to decide what to do with it? Go kart or kids project? Who knows.
Nice! Thanks. Makes sense to me and I'm an idiot when it comes to electrics. Can't quite work out what you say here: 0:54 "these two wires, these are the _____ wires"
Hi i have a problem pks help me... I wired all as on the video, then connect to home 220v, the motor get faster and faster and after 3 sec was an electric light and the Electricity fell down from the main switch. What i have to do? The motor didn't hurt at all. Ty
This kind of wiring is forxong the motor to go full speed not indicated for long periods of time is just for testing purposes you will need a dedicated speed controller to start it slow and then full speed browse to my videos find speed controller on washing machine motor
great video, I am trying to wire up a motor and cap, a friend gave me with no luck. the motor is a 110v whirlpool #w10416660fsp it has 4 wires green white yellow red . I can get the motor to run by jump starting it but it will not start on its own with the capasitor, the cap tests good. have checked the resistance across the wire here are the findings. white and yellow=8,white and red=8, red and yellow=11 can you tell me how to wire this motor, thanks.
check for continuity as well between all the wires,if you have the capacitor it probably means that is wired different and will not work without capacitor if you give the motor a spin will it run? send a picture with the wires and connection demiwattuk@gmail.com to see if is the same with the one from the video all the best
Hello i have a question. I accidentally wired the tack wires to 240v (i thought that thats the right way to do xd) and than a small electric lighting happened. So my question is that if i would do as you did it will work or i just burnt down the whole motor? pls help me i need your help!
Gergő Czikora just follow the video and you will succeed, the sparks from tacho means that probably you can't use the motor on a washing machine circuit but the rest should be ok
@@NoSkillsRequired yes , i found your vídeo about motor direction and now I made one form to change motor direction (with only one button of 6 pin ) but has a problem when i change directions with speed the motor jumps and litter the bench 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
hey i just subscribed to your channel and found a lot of interesting content. I have a Hoover washing machine motor with brushes, 1300 RPM, 240v only diference is the wiring they used they hav 8 port connect n instead of the blue wires connecting on one side they connect on opposite sides and i cant apply the connecting method you show here ho can i fix it. i even have a short video of it or pictures
Hello Sir, Your video is very useful even for those who have no basic knowledge of electrical engineering. Can you please let me know how a washing machine motor can be used to generate free electricity and how much maximum watt we can get? I need to know whether it is possible to run 1500Watt computer 24hrs?
Hi there check my video washing machine motor generator is not free energy yet but is more out than in small amount i have more video to come about this subscribe and stay tunned all the best
hi when i connect voltage regulator motor spins faster and faster-when i turn up motor reg motor goes even faster but wont go slower when reg turned down
JOSE AGUILAR try and test the motor like in my videos you când do it with 9v battery in series the tacho is for adjusting the speed in the control unit if you are using the motor without the control board from washing machine the tacho wires are useless
Why my washing machine motor in their brushes always occure sparkling and its sound is quit rough,should i replace the carbon brush or what. Thanks for your explaination/
Brandon Austin hi there buddy check out all my washing machine videos it is all explained there, how to connect, how to regulate the speed, to ac/dc and more
How would you wire this washing machine motor? Only 3 wires connected to a centrifugal switch. forum.allaboutcircuits.com/attachments/motor2-jpg.168073/
@@NoSkillsRequired How would I test it to know if it is an induction motor? Would it blow up if it didn't have a capactor and I tried to "plug it in", lol?
Scott Walker if you are not sure don't plug in the mains, this video is just for universal motor, if you don't have the brushes left and right the black carbon stuff that means it's not universal motor could be something else
Finally we did not leave the hostel with you. Always the talk, the hollow and empty speech and not the least useful explanation. You should have chosen a job as a radio host. Here we need image.
Hello Nice tutorial. I have a different motor,and i dont manage to fix the wire, do you have a mail that i can Contact you, my motor is a samsung GJ-2UA009A
![CHILE vs. BRASIL [1-2] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/5ObJt_71AYc/mqdefault.jpg)
Best video I've seen on this. Really simple and well explained
Paul Rossiter cheers pal, I have some videos about touch switch diy, and next will be how to wire this motor as generator so stay tuned
After throwing away numerous washing machines over the years, since iv started building and flying drones, planes ect. Iv decided to remove the motors from them now before scraping. Thinking there's bound to be a use for it. But never knew how to power it. But now I do. Thanks. Just need to decide what to do with it? Go kart or kids project? Who knows.
Fantastic video , no tech speak just tells it as it is . Thankyou
Thanks for the information
Nice! Thanks. Makes sense to me and I'm an idiot when it comes to electrics.
Can't quite work out what you say here: 0:54 "these two wires, these are the _____ wires"
The tacho wires that we will not use ,so from the start we have eliminated 2 wires all the best my friend
Thanks mate. You're a real life saver. A thousand thanks.
Glad that i can help it is my pleasure all the best mate and drop the comment onwhat you want to see next who knows...😁
I have never seen this type of motor in un-United States!
I come across this motor in Uk and Europe
Thanks exactly what i needed. Works perfectly!
Samuel Coste Glad to help all the best
love the craziness and a nice straightforward tutorial
+Jason Reeve thanks mate this is the stuff that I am trying to promote all the best uuuuuuhhhhhhhuuuj :)
ha, i was nervous for you at the end when you connected the AC240. nice vid thanks for the info
Does it apply to any new washing machine motors?
Only to universal washing motors
Did you wired on series or parallel operation
thanks for explaining this, now i can run my motor with dc current, thanks
Alex Manzanero no probs any time all the best buddy
What about if the motor has 9 wires? I’ve identified the tachometer wires and brush wires but don’t know what the other 5 are for?
looks good to.me. After watching 3.times.
Look again my friend
Hi i have a problem pks help me...
I wired all as on the video, then connect to home 220v, the motor get faster and faster and after 3 sec was an electric light and the Electricity fell down from the main switch. What i have to do? The motor didn't hurt at all. Ty
This kind of wiring is forxong the motor to go full speed not indicated for long periods of time is just for testing purposes you will need a dedicated speed controller to start it slow and then full speed browse to my videos find speed controller on washing machine motor
hi can you test a washing machine motor that way to see if its working i just subcribed to your channel great stuff on it
great video, I am trying to wire up a motor and cap, a friend gave me with no luck. the motor is a 110v whirlpool #w10416660fsp it has 4 wires green white yellow red . I can get the motor to run by jump starting it but it will not start on its own with the capasitor, the cap tests good. have checked the resistance across the wire here are the findings. white and yellow=8,white and red=8, red and yellow=11 can you tell me how to wire this motor, thanks.
check for continuity as well between all the wires,if you have the capacitor it probably means that is wired different and will not work without capacitor if you give the motor a spin will it run? send a picture with the wires and connection demiwattuk@gmail.com to see if is the same with the one from the video all the best
Hello i have a question. I accidentally wired the tack wires to 240v (i thought that thats the right way to do xd) and than a small electric lighting happened. So my question is that if i would do as you did it will work or i just burnt down the whole motor? pls help me i need your help!
update: ok so i wired everything up like it done in the video and it works just fine :D Thank you :D Youve earned a sub :)
Gergő Czikora just follow the video and you will succeed, the sparks from tacho means that probably you can't use the motor on a washing machine circuit but the rest should be ok
@@NoSkillsRequired You are the best man! Really really helpful!!!!!
Gergő Czikora my pleasure friend, glad that it was helpful all the best and stay tuned
@@NoSkillsRequired one thing remains unknown to me.. the rpm of this motor :D what do you think how much it could be? :D
Thanks - it helped me out :)
Glad that you find it usefull
THX !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
So coil in series with brushes and i can use it on DC/AC?
Series connection can run both ac or DC at maximum speed on ac and on dc directly proportional with the voltage less voltage less speed
@@NoSkillsRequired Thanks i tried it works well
@@blowingchannel4424 noce use it carefully all the best
Tanks for the vídeo i learned important things. But How to change motor direction? my motor is like your motor ....
Hi there buddy check my other videos i covered all this aspects all the best with your projects
@@NoSkillsRequired yes , i found your vídeo about motor direction and now I made one form to change motor direction (with only one button of 6 pin ) but has a problem when i change directions with speed the motor jumps and litter the bench 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
wow very simple steps .thanks bro
Mahendra Rajput no prob any time friend all the best
Hello from Greece. Bosch - 144797 Please which cables from this motor should I use to work at high speed? Thanks !!!!!!!!!!
hey i just subscribed to your channel and found a lot of interesting content. I have a Hoover washing machine motor with brushes, 1300 RPM, 240v only diference is the wiring they used they hav 8 port connect n instead of the blue wires connecting on one side they connect on opposite sides and i cant apply the connecting method you show here ho can i fix it. i even have a short video of it or pictures
thanks for talking
Hello Sir,
Your video is very useful even for those who have no basic knowledge of electrical engineering. Can you please let me know how a washing machine motor can be used to generate free electricity and how much maximum watt we can get? I need to know whether it is possible to run 1500Watt computer 24hrs?
Hi there check my video washing machine motor generator
is not free energy yet but is more out than in small amount
i have more video to come about this subscribe and stay tunned all the best
hi when i connect voltage regulator motor spins faster and faster-when i turn up motor reg motor goes even faster but wont go slower when reg turned down
reallywont sufferfools hi there depending what king of motors controller do you use, you should go for a dedicated voltage controlled ac motor
reallywont sufferfools check washing machine motor speed control I got a video just for that all the best
Hi nice one. But if you did diagram of the connections it be very good
There are diagrams in the similar videos of mine if cant find it emal me iland will send it to you as soon as possible all the best
So, series connect field and rotor?
Thanks a lot, making a centrifuge for put vegetables in the freezer when the season comes.
Washing machine motor is awesome
man last minute u so funny nice video
Glad that you like it
What the f***..love it
If the tachometer resistance is good. What else can go. Wrong. Or. What else to check
JOSE AGUILAR try and test the motor like in my videos you când do it with 9v battery in series the tacho is for adjusting the speed in the control unit if you are using the motor without the control board from washing machine the tacho wires are useless
Merry Christmas everyone
Haha that was funny at the end! What were you powering the motor with? That little battery?
Paul Costello thanks in this video straight from the mains 220v uhuuuu
simply , the stator coil and brush wires are connected in series.
Can you do a video how to use it and connect to Direct corrent power supplies
Zero Gerona this is the way to do it on ac and cd follow step by step and do not touch the wires after connected to the mains live be careful
Very many thanks for that, now off to your dynamo video.
Andrew Howard thanks try my others video you will find something all the best
selamat malam, pak bos mau taya,cara merubah dinamo mesin cuci buka samping biar jadi kabel 3 gimana iya trimakasih
Agus irawan Agus hi there buddy I don't know what you are saying but I will translate and send you a mess
What motor is this? What machine is it for?
A washing machine motor dipshit
Why my washing machine motor in their brushes always occure sparkling and its sound is quit rough,should i replace the carbon brush or what. Thanks for your explaination/
u connect wrong thing...your wahing machinemotor has some white wires right...dont connect those
In 36volt?..gracias por compartir.
Raul Lopreste from 36v on will work better on 12v is just for testing purposes
@@NoSkillsRequired genius
You have good spirit, keep up the good how to project videos.Have you been shocked a lot? I HAVE.
Tony Scolerio yeap many times but you learn from every one safety first all the best
Please any idea about the weight of this motor ?
Braham Yassine its heavy maybe 5kg
CAN YOU EXPLAIN it to me please
Brandon Austin hi there buddy check out all my washing machine videos it is all explained there, how to connect, how to regulate the speed, to ac/dc and more
1 brush connect to the phase (brown, black, red) wire, the second brush connect to 0 (blue) wire on test cable. thats it!
Great Man thanks
Bosnjak Bosanac no probs mate any time
Kindly please help me to convert 195 v to 220v
Hi there you will need a power stabilization device,or a custom made transformer
My washing machine motor have three wire... white blue and red.......
dtml HK it's got brushes?
@@NoSkillsRequired i also have 3 wire, no brushes.
steve adams in this case the video is no good for you, search for induction or series wound motor how to wire it
Thanks
+turker sulcan Any time enjoy and don't be a stranger all the best
How would you wire this washing machine motor? Only 3 wires connected to a centrifugal switch. forum.allaboutcircuits.com/attachments/motor2-jpg.168073/
Scott Walker I am guessing is a induction motor you will need a capacitor for that but not tested fully yet
@@NoSkillsRequired How would I test it to know if it is an induction motor? Would it blow up if it didn't have a capactor and I tried to "plug it in", lol?
Scott Walker if you are not sure don't plug in the mains, this video is just for universal motor, if you don't have the brushes left and right the black carbon stuff that means it's not universal motor could be something else
4:05 : wtf 😂😂😂
Khaled Sidawi "a small technical problem" 😂😂😂
Cutting the unused wires is stupid. Leave them available so it can be used later for a distended application.
Its an a dc winding motor
Motor under tension DCV ready to die!
Not quite my friend search more about this type of motor its not called universal motor for nothing all the best
there are only four wires to my motor
hi there try the same combination from the video.1 brush +1coil connected
and apply power to the other 2 remaining wires
Bhupendra
Finally we did not leave the hostel with you. Always the talk, the hollow and empty speech and not the least useful explanation. You should have chosen a job as a radio host. Here we need image.
You have all the informations that you need in a small moving picture it can't go easier then this
Hello Nice tutorial. I have a different motor,and i dont manage to fix the wire, do you have a mail that i can Contact you, my motor is a samsung GJ-2UA009A
I realy need help please