VNETPhones Pairing 2 V4plus with 2 V6 for 4-way simultaneous comms in 5 easy steps

VNETphones are a practical cost-effective riders communication option specially for small group of riders of 2 to 4 wanting to communicate simultaneously during rides. They do provide on-the-go rider communication at a fraction of the cost of high-end units that basically provide essentially the same purpose - to talk and listen to each other during group rides.
EJEAS V6 models are cheaper but although they can connect up to 6 riders, communication is limited between 2 riders at a time and each rider has to switch between the channels (A to E) to be able to communicate to only one of the 6 connected riders at a time.
EJEAS V4plus models allows simultaneous communication for 4 riders but are a bit more expensive.
A more cost-effective set-up involves pairing between 2 V4plus and 2 V6 units.
Video instructions on pairing 2 V4plus and 2 V6 EJEAS VNETphones are difficult to find and difficult to understand in case you may have found either one of the 2 videos on this same topic that we've seen in youtube.
Hopefully, this instructional video will be a lot easier to understand and follow.
Ride safe in groups, communicate with each other and enjoy the ride!!!

[@emilianorueda8888]

Thanks!!!

[@TheWeekendRider2.0]

Thank you.. hope you find it useful 😅

[@Mccree13]

Thanks for posting this. Yes it is hard to find a detailed video on how to do this. i have followed this a few times and I can only get 1 and 3 and 2 and 4 to communicate, I cannot get them to work together at the same time. Do you have any advice. One question on step 4. You say to "Press B of Rider 3 V4plus but rider 3 is a V6 and in the video you press B on the rider 3 (v6). Maybe this is why I cannot get all 4 to work together?

[@sermyeze]

Hola buenas tardes, esto hay que jacerlo cada vez que apagamos low equipos no?

[@TheWeekendRider2.0]

In our case, we did not have to do it every time if you just simply turn them on and off without changing any connection settings. Settings are preserved unless other changes are done on any unit like connecting to others not in the group. You will just have to do it again whenever some group connections are altered...I hope this helps...

[@riccardodimarco452]

Good video!!!

[@TheWeekendRider2.0]

Thank you for your feedback... Much appreciated...

[@mahakakurniawan3886]

Dapatkah V4 plus tersambung ke 2 V6 pro dan bukan V6

[@TheWeekendRider2.0]

Yes

[@mahakakurniawan3886]

​@@TheWeekendRider2.0 kenapa ada beberapa video yang tidak merekomendasikannya, bagaimana hasil suaranya?

[@mahakakurniawan3886]

V6 VNETphone apakah sama dengan V6 Pro?

[@TheWeekendRider2.0]

@@mahakakurniawan3886 just follow the same procedure in this video for connecting v4 plus with v6. Sound is just ok for its cheap price but not as good as high end communicators like the Cardo system… connectivity is also limited, only 2 user for V6 alone.. need to connect with v4 plus for 3 to 4 connections..

[@TheWeekendRider2.0]

@@mahakakurniawan3886 Not exactly the same and Im Not so sure about all the differences, but I think they have similar functions but the V6 pro is probably the more advanced next generation I think. USB connector is also different between the two..