Great video Jason Well Done, very informative i've been looking for a video like yours for years on how to do CMYK properly , everyone else seems to miss out a step or two but yours is so easier to understand !! Thanx heaps and hello from Australia
Thank you for this video! For any other newbies like me who get lost if something doesn't work.... in the most recent versions of Photoshop creative cloud - version 22, since you no longer can use the line tool in pixel mode, it worked for me to use the pencil tool, just make sure to increase the pixels after changing it to pure black like he says in the video or you might not be able to see the line you have drawn. And when using the pencil tool and using the blue guidelines, you don't need to use the shift key to draw a straight line.
I can do the same thing in one minute. Just make sure that you work in CMYK-mode. Under Filter -> Pixelate -> Color halftone... Fill in the radius in pixels and the angles in CMYK-order. Voila! Now you can do the separation of the four channels as described in the clip.
@@watersinc.519 when you print in CMYK each layer of color is composed of thousands and thousands of tiny dots, and each layer has to align with the others in certain angles so the colors blend and create the illusion of different colors. There’s a term you can search called moiré pattern if you want to go further into it
THAN YOU SO MUCH!!! I've been meaning to learn to do this for so long and over-complicated it in my head.. This was so helpful! Thanks again for sharing
Thank you so much! I've been liking for a video to help me and yours was so easy to follow. I'm going to try it and then let you know how it turns out!
This is so cool, cant wait to try it out. I had to google the screen angles thing having never dealt with CMYK seps before - is there a reason you chose this combo over say the 105, 90, 75, 15 degree set up?
about the settings on bitmap. angle settings that you put are the standard settings? ) black 45 freq 15 ,yellow angle 0 ,magenta angle 75, cyan angle 15... when you print this on tshrit which color should be the first to be print? thank you
If you want to print on a dark garment and you want a white layer, do you flip the black channel and put that layer underneath all and what would be the angle of the white channel? what is the dot size so it is not thick on garment?
Thanks man. Im using PS 2021 and I was able to follow without any problems. I will burn the screens tomorrow and see how the design comes out. The only question I have is about frequency. What are you looking at when determining what frequency is right? Are you looking for details on the artwork? opacity? Or you have to actually screen print the design and make changes base on the results you get?
detail on the artwork, lines and edges crisp, while accounting for the silk screen mesh count, the higher the mesh, the more frequency you can apply (detail)
Gendo3s2k yes there is a reason, if you don't choose it then the colors will begin to overlap on each other, you might also end up having some linear patterns on your shirts or whatever you are printing on.
because otherwise the colours would all overlap each other and you wouldn't see them eg yellow covered with cyan and magenta and black and you won't see the colour watch this for a simple explanation ruclips.net/video/qooBg20wYLU/видео.html
I Love your helpful video. Thanks. When I do the registration marks in my layer window(box) shows layers there but not you, when I'm looking at your screen you don't have extra layers showing (I got 2 monitors) Do I'm doing something wrong?
If you are printing on any other color other than white, you'll have to lay a white under base for the CMYK layers. You'll then need more than a 4 color press.
your image needs to be background layer. Simply select the layer, then go to 'layer' menu on top, then 'new', then 'layer from background'. Now go to that layers channels and do split channel.
What about the background white?? wouldnt that show when you print? shouldnt you (select, color range, change sampled colors to highlights, hit ok, then backspace once)to delete the background???
you don't print the white. the printers don't have a white color... that's the color of the paper and when we print to transparency the white is... transparent.
Umm, if you Bitmap everything I don't think you need all diffrent angles, also your line screen is way to low should be 45, 55, 65 unless you were looking for an old comic looking process job.
Wow. Great video. Can you make another one? Please. I need to know how make separation CMYK with two extra colors From the Clint. its a photo and client logo. Can you help me?
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
THANK YOU LESS TALKING STRAIGHT TO THE POINT and I’ve actually learned thank u so much
Great video Jason Well Done, very informative i've been looking for a video like yours for years on how to do CMYK properly , everyone else seems to miss out a step or two but yours is so easier to understand !! Thanx heaps and hello from Australia
Finally a good video on this topic. I don't understand why so many can't explain this well.
Thank you sooo very much for this! You've made it so bloody simple and easy to follow!
I just can't thank you enough for this tutorial. Saved me a bunch. Thanks mate. God bless you. Subscribed.
Thank you soooo much for this tutorial, very detail and really useful!
Can’t wait to try this out tomorrow!!!
You are a TRUE LIFE SAVER! Thank you so much!
Thank you so much!!! I've been trying to find a less complicated video! AND you've made it so damn simple to understand!!!! 👍👍👍
The tutorial is flawless. Thank you.
Omg you just made my screen printing life better
Thank you for this video!
For any other newbies like me who get lost if something doesn't work.... in the most recent versions of Photoshop creative cloud - version 22, since you no longer can use the line tool in pixel mode, it worked for me to use the pencil tool, just make sure to increase the pixels after changing it to pure black like he says in the video or you might not be able to see the line you have drawn. And when using the pencil tool and using the blue guidelines, you don't need to use the shift key to draw a straight line.
you don't need to add manual guidelines you can add them automatically
I can do the same thing in one minute. Just make sure that you work in CMYK-mode. Under Filter -> Pixelate -> Color halftone... Fill in the radius in pixels and the angles in CMYK-order. Voila! Now you can do the separation of the four channels as described in the clip.
Is there a specific reason for number for angles?
@@watersinc.519 when you print in CMYK each layer of color is composed of thousands and thousands of tiny dots, and each layer has to align with the others in certain angles so the colors blend and create the illusion of different colors. There’s a term you can search called moiré pattern if you want to go further into it
THAN YOU SO MUCH!!! I've been meaning to learn to do this for so long and over-complicated it in my head.. This was so helpful! Thanks again for sharing
Thank you so much! I've been liking for a video to help me and yours was so easy to follow. I'm going to try it and then let you know how it turns out!
Nice, how would you do the white underbase? Thanks!
The best tutorial on this thanks.
I disagree, it's poor!! See this guy ruclips.net/video/qooBg20wYLU/видео.html
Where are u getting the angle numbers from ?
Very helpful!!! thank you for your knowledge .
Thank you so much l've been liking for a video to help me and yours was so easy to follow 😎😍🤗
what about adding highlight white as well as base white for dark shirts??
Excellent tutorial. Very easy to follow.
good day sir.. may ask.. WHAT if not to change anything in the BLACK panel to make the line straight.
This is so cool, cant wait to try it out. I had to google the screen angles thing having never dealt with CMYK seps before - is there a reason you chose this combo over say the 105, 90, 75, 15 degree set up?
please answer his question, wondering the same thing myself
Watch this video and he explains the science behind the angles. AMAZINGLY GOOD ruclips.net/video/qooBg20wYLU/видео.html
Ff
Very very wonderful
yo brother thanks a lot of really good info easy to process easy to follow appreciate the time you took to make this video
THANK YOU SO MUCH FOR MAKING THIS VIDEO... IT IS VERY HELPFUL
Thank you Jason that was a clear tutorial for me and it helps a lot..new subscriber here..and belled for another vid tutorial from you...
I did it just like you said but it doesn’t separate the colors like it did for you? What am I doing wrong?
about the settings on bitmap. angle settings that you put are the standard settings? ) black 45 freq 15 ,yellow angle 0 ,magenta angle 75, cyan angle 15... when you print this on tshrit which color should be the first to be print? thank you
the order isYMCK. hope that helps
Why you choose color black when you decided to change the color?
I have learned from this video but I have one question to ask..how can you determine the percentage of the angle in half tone screen..thanks
Dead ass don't know what angles to use
watch this ruclips.net/video/qooBg20wYLU/видео.html
If you want to print on a dark garment and you want a white layer, do you flip the black channel and put that layer underneath all and what would be the angle of the white channel? what is the dot size so it is not thick on garment?
why did u use "multiply" in the final? is to see how will it look when screenprinting?
Yes
thank you, I always wonder how you print four colors on stuff. I will definitely be trying this.
LOVELY VIDEO THANKS
doesn't it bother you that your registration marks are bitmapped with this method ?
When i split the black channel it becomes grey why
Thank you, this is was so easy to do and learn.
you must put cross after halftone and you make colors multiply for nice view it is ok for print house but in screen print that colors cover each other
nonsense, that's why you use different angles for each colour
Should I also use Cyan, Magenta, Yellow, and Black colored paints when I silkscreen it on the shirt?
So amazing work sir
This was very clear and helpful, thank you.
Jason, you are the man! Thank you!
Hi..! This is a great tutorial.
I just have a question.
Is there standard amount or number that most screen printers use for the Frequency and Angle?
For decorated apparel you want 55 frequency and 61 degrees for all plates.
@@randalldesignd9857 Utter utter nonsense. YOU have no idea what you're talking about
watch this explanation ruclips.net/video/qooBg20wYLU/видео.html
i didn't get the angle.. pls help me to understand.. thanks
why would you make MANUAL registration marks? It's done automatically!!! When you print it adds the reg marks
thank you so much so easy and very clear good VDO CMYK for screenprinting
Thanks man. Im using PS 2021 and I was able to follow without any problems. I will burn the screens tomorrow and see how the design comes out. The only question I have is about frequency. What are you looking at when determining what frequency is right? Are you looking for details on the artwork? opacity? Or you have to actually screen print the design and make changes base on the results you get?
detail on the artwork, lines and edges crisp, while accounting for the silk screen mesh count, the higher the mesh, the more frequency you can apply (detail)
hat version of Photoshop do i Need?
is there a reason why you chose those specific angles for the halftone colors?
Gendo3s2k yes there is a reason, if you don't choose it then the colors will begin to overlap on each other, you might also end up having some linear patterns on your shirts or whatever you are printing on.
Is it always the same angles for the colors he used?
yes, they're always like that, here's a easy explanation why www.csuchico.edu/~rpenne/screening/ScreeningBasics.html hope that helps :)
Birliant idea good work sir
And thanks
great video- most helpful so far! thank you.
wondering- why a different angle per color?
because otherwise the colours would all overlap each other and you wouldn't see them eg yellow covered with cyan and magenta and black and you won't see the colour watch this for a simple explanation ruclips.net/video/qooBg20wYLU/видео.html
Helpful
damn my "split channels" is greyed out
Thank you, its very clear tutorial
help my image diddnt go back to normal doing the edit >fill thing it went like pure black and looks like a bad photocopy what did i do wrong
So what files do you send to the printer? The psd with multiply layers or the pdfs with cyan, magenta, yellow, and black?
you send the pdfs to the printer to use for print. the multiply layer was to get an idea of what it will look like once printed
what screen mesh will you use in the cmyk settings you put
120
Thank you very much
waoO..cool the way you made this..much helpfull..thanks man..(Y)
Stunning !
Sir, which software are you using ? 🙏🙏. Nice detailing 😀👍👍
I Love your helpful video. Thanks. When I do the registration marks in my layer window(box) shows layers there but not you, when I'm looking at your screen you don't have extra layers showing (I got 2 monitors) Do I'm doing something wrong?
That does not work with a photo how do you do those?
I have screen printers that say I must have a vector graphic. Does this make a vector graphic, or is it still a raster image?
so I heard you say hello was zero how do you get the value?
do you need rip software to print film positives? thanks for the vid!
Thank you so much for this
Nice
You are Best Thank u
THANK YOU SOOOOOO MUCH
Is there a white underbase layer I use?
Say I wnat a design for a black shirt using CMYK
What do I do?
If you are printing on any other color other than white, you'll have to lay a white under base for the CMYK layers. You'll then need more than a 4 color press.
How to use this for CMYK screen printing?
thank you
Gracias Jason, estupenda referencia.
is this way of layout can be use in silk screen printing?
I’m almost there I just can’t fill the colors like you did at the end. The fill button is grayed out😔😔
on the image I'm working at, the split channel button is greyed out. Why is it so?
your image needs to be background layer. Simply select the layer, then go to 'layer' menu on top, then 'new', then 'layer from background'. Now go to that layers channels and do split channel.
thanks, awesome video!!!!!!
AWESOME VIDEO! Very well explained! you’ve gained a #NewSub
What about the background white?? wouldnt that show when you print? shouldnt you (select, color range, change sampled colors to highlights, hit ok, then backspace once)to delete the background???
you don't print the white. the printers don't have a white color... that's the color of the paper and when we print to transparency the white is... transparent.
Thanks a lot for this Vid
ughh i forgot reg marks and now trying to drag into another file, not happening!!! but ty for the tutorial good job
Thanks for this! very helpful!
This all members create CMYK colours separation
Umm, if you Bitmap everything I don't think you need all diffrent angles, also your line screen is way to low should be 45, 55, 65 unless you were looking for an old comic looking process job.
can u help me with a written out version of THIS tutorial pls very good just a little too fast pced for me to follow but amazing video thanks
Press pause.
doesnt help lol i learn better from reading than listening
Press pause and write down what he says.
Read it back to yourself.
why dont you fuck off with your unhelpful trolling aight?
Why don't YOU fuck off asking people to do an amount of work for no money?
Aight?
Thanks you 🙏
Don’t I need to invert this though so the ink goes through?
Yup it should be inverted when you transferred it unto your screen.
thank you for this!
Thank you
awesome ！
Is the background automatically removed, or did I miss something?
There is no background bro
hey just want to ask..what kind of ink can i used to print it into transparency paper?..thanks dude..
regular printer ink
Nice!
Jason why did you prefer the Adobe 8?
in this whole video i was wondering the same ..lol
kudos thanks sir!
HOW TO CONVERT A DIGITAL PRINT INTO A PVC SCREEN PRINTING FOR WATER TRANSFER PAPER ??
Wow. Great video. Can you make another one? Please. I need to know how make separation CMYK with two extra colors From the Clint. its a photo and client logo. Can you help me?
Thank you ..fr the phi.