Hey Chad & Jolene. I enjoyed watching you make the “shaker” cover. When you wondered what to do for the “corners” and you came up with the idea of making them like an Airstream was good. Something I do, which comes in handy for spots like that, is I save the steel toe inserts out of my old work boots - they have quite a deep compound curve and they are left and right handed. I’m actually going to use a couple of pairs when I enlarge the sump of my 460 oil pan sometime soon. Keep up the great work you two 😃👍
Loved your comment on Jolene's taping skills and how proud Jim would be to see how little tape she used. You said it would probably bring Jim to tears. Love the show and Fina.
I'm 58 and disabled due to several spinal surgeries n other illnesses. I bought a 1950 Chevy Delux, of course it has rust but either way I'ma go for it. After watching you for bout a year, I'm gonna let my mind and ideas run loose. I used to think my ideas were crazy but after watching you, lol hell I'm normal. So thanks for releasing the Cracking! Take care my friend and say hello to your beautiful wife for me. Y'all take care from Gonzales Louisiana
I was mentored for auto body basics but always had a love for metal work this really opened my eyes on how to achieve bends on thicker gauge steel I really enjoyed it
I have found that a “ Tailors “ tape works far better then a self rolling tape measure . They lay nice and flat on curves . You can get them at any sewing supply store and the com in varying lengths . I used to do Custom auto interiors, except for welding , it’s similar fabrication - no welding -lots of sewing
Wow!! Bad Chad and Jolene, I've been watching your vidios for months almost daily, to see your enthusiasm and work is down to earth,, and to see your viewers into it, great follower's and comments
Amazing how Chad just lines stuff up and most times it spot on. A true Craftsman and artist. Also amazing how Jolene gets all the little stuff. Love watching.
I added a Shaker scoop to my Black and Blue 69 mustang, Also shared you videos with brother, son and best friends. Love your creativity. You inspire me to try new things.
This was really interesting to watch. Love watching completely fabricated pieces you made up in your mind. Thank you Chad and Jolene. Shared with a friend.
GID DAY Chad & Jolene wasn't Dane so full of very good information yesterday, he is one very nice man i hope we do see more of him in the near future..
I went out and bought a welder Sunday because of you. And because of you it's a Lincoln. It's the 140HD Weld Pak Once it pays me back I'm going to look closer at getting that plasma cutter.
Hello Chad and Jolene, what an increadable creation. Taking plain sheet metal and turning it into a work of art for Elvis. Keep up the great content. Take care and God bless.
I've watched ever so many of your videos Chad, and have to say this one was most informative! At the beginning I was thinking how the hell is he gonna make all those curves ? .... You killed it Chad !!!
You do a great job on everything you do. I'm trying to save up to get a welder so that I can start on a project of my own . I have everything else and even the project so ,I'm ready to go as soon as I get it together. In the mean time I'll just keep watching and learning. Keep up the great work and God Bless you guys and your family. 💯👍👍🙏🙏✌😊✌
Just catching up on your videos and man you are a wizard with that sheet metal. I don't know if you have ever heard of being in a "flow state" but man you are there when you are working on that metal.
The shaker is going to look good Chad you make it look easy to make one thank you for the great videos elvis is really going to be king of your cars with the color you chose its fit for a king
Nice fabric chad, you doing an awesome job on that shakerhood that you're making can't wait to see the finished product. Jolene you doing excellent job of filming.
You are an amazing artist bad Chad🤔. For never making something like that before and figuring it all out right in front of our eyes in just over an hour is amazing to me !! I learned so much from this channel it’s amazing 🤩 🥇🥇
Well done Chad a great addition to the engine bay. You do just enough to get the job done no wasted time or materials. This method works. How do I know because seen you do it with my own eyes lol
Another fun project to get Elvis dressed up.
Best channel on RUclips. Keep up the good work team Hiltz.
Hey Chad & Jolene.
I enjoyed watching you make the “shaker” cover. When you wondered what to do for the “corners” and you came up with the idea of making them like an Airstream was good. Something I do, which comes in handy for spots like that, is I save the steel toe inserts out of my old work boots - they have quite a deep compound curve and they are left and right handed. I’m actually going to use a couple of pairs when I enlarge the sump of my 460 oil pan sometime soon.
Keep up the great work you two
😃👍
ALRIGHTY WELCOME BACK! I LOVE WATCHING THESE TWO WORK TOGETHER WHILE CHAD CREATES HIS ART STEP BY STEP!
Just a beginner but since watching you, I have used the taper/shrinking method for jeep project. I appreciate your skill so much.
A manufacturing genius. It's nice to see the progress of the project. Thank you for the video.
Agreed, Chad is a genius
LS motor seems less intimidating after the wiring video. Chad keeps it simple and understandable. Thanks Chad and Jolene!
The kid seams to know what's going on with the engine.
On m q
Loved your comment on Jolene's taping skills and how proud Jim would be to see how little tape she used. You said it would probably bring Jim to tears. Love the show and Fina.
Thanks for the shirt!
I'm 58 and disabled due to several spinal surgeries n other illnesses. I bought a 1950 Chevy Delux, of course it has rust but either way I'ma go for it. After watching you for bout a year, I'm gonna let my mind and ideas run loose. I used to think my ideas were crazy but after watching you, lol hell I'm normal. So thanks for releasing the Cracking! Take care my friend and say hello to your beautiful wife for me. Y'all take care from Gonzales Louisiana
I was mentored for auto body basics but always had a love for metal work this really opened my eyes on how to achieve bends on thicker gauge steel I really enjoyed it
Wow!!! Really coming along nicely!
I have found that a “ Tailors “ tape works far better then a self rolling tape measure .
They lay nice and flat on curves . You can get them at any sewing supply store and the com in varying lengths .
I used to do Custom auto interiors, except for welding , it’s similar fabrication - no welding -lots of sewing
Yes a tailor's tape does work good
Make the passengers front window the same color as rear. I find the white distracting to the cars bueatiful lines.
Wow!! Bad Chad and Jolene, I've been watching your vidios for months almost daily, to see your enthusiasm and work is down to earth,, and to see your viewers into it, great follower's and comments
Amazing how Chad just lines stuff up and most times it spot on. A true Craftsman and artist. Also amazing how Jolene gets all the little stuff. Love watching.
Every day I go to this show to see two people working together to complete a masterpiece, Jolene and Chad - thanks
I know the hood scoop is good to look great because you will make it look great 👍
Creativity is its own reward. Always a rewarding show.
It's always amazing watching you build something from scratch. That cover is going to look awesome under the hood, in between those louvers.
I added a Shaker scoop to my Black and Blue 69 mustang, Also shared you videos with brother, son and best friends. Love your creativity. You inspire me to try new things.
Another lesson in metalwork, love the outcome of the shaker hood, made on the fly and worked out first time, Excellent work by both of you
This was really interesting to watch. Love watching completely fabricated pieces you made up in your mind. Thank you Chad and Jolene. Shared with a friend.
Chad is fabricating a shaker hood scoop for the LS. Jolene's camera is on the job and doing great as usual.
Good day HILTZ MOTOR CO. Love to watch Chad fabricate he makes it look easy..
I love the longer videos. Thank you Chad and Jolene. The extra stuff in Facebook is awesome. Jolene saved Chad a lot of tape lol. Jim would be happy
Best show on RUclips!! The engine harness video was great as well. Love the hood. Very creative.
Its nice to watch a fellow fabricator. You two are a good team.always look forward to your videos 😎
Another great metal working tutorial. Shaker hood going to look awesome. Thanks for your willingness to share your knowledge and experience
The Engine tutorial was informative. That young man knows his stuff. Thanks Chad and Jolene.
Amazing ... absolutely amazing ! ... I would have had no idea how to do this !!! ... But now I do ! ... Thanks Chad and Jolene !
Always fun to watch Chad take what he has and make something work and look cool. Keep doing what you're doing.
It's fascinating to watch how bends are made. Jolene follows each step like a professional so we can see each move Chad makes. Whatta team!!!!!
Louvers are a nice touch ! Always doing something unique!!
Now this is fun, the shaker hood scoop ROCKS !!!
Great show Sunday and a great young man that knows his stuff
Amazing fab work!! It's simply incredible how you take a flat piece of sheet metal and turn it into something!!
The joy of a shaker scoop shows how much fun cars can be.
Enjoying a Monday evening with Chad and Jolene! Thanks for the videos!
The shaker Chad made looks better than the plastic one and can be painted. Jolene always does a fabulous job with the camera.
I love the idea of a shaker hood on Elvis. I have an LS in my truck and I want to do that to it.
been wanting to learn how to do this....thank you for the visual aid and instructions
Thank you for keeping it simple you make it very easy to follow along and I like that.
Thanks for letting us look over your shoulder while you work... I am always amazed how you make it all look so easy
Chad is brand new to the LS scene but already doing things that i haven't seen others do to the LS. The shaker hood is going to come out great!!!
me and my son watch daily. love your work.
GID DAY Chad & Jolene wasn't Dane so full of very good information yesterday, he is one very nice man i hope we do see more of him in the near future..
Elvis is in the building. Keep up the great work. You inspire me every day.
I went out and bought a welder Sunday because of you. And because of you it's a Lincoln. It's the 140HD Weld Pak Once it pays me back I'm going to look closer at getting that plasma cutter.
Love the shaker on the trans am and the mustangs. Glad you're going that route.
Good evening jolene and chad hope your having a great Monday also thank you for sharing your journey also congratulations to last week’s winners
I knew you were going for a trans am shaker and you really got it right, great video 👍👍
you are fast with the welding, loved the video, learn more here than any other youtube channel ty
Hello Chad and Jolene,
what an increadable creation. Taking plain sheet metal and turning it into a work of art for Elvis. Keep up the great content. Take care and God bless.
This will be very interesting to see
Best channel on RUclips. Keep up the good work team Hiltz.
Looking good! Can’t wait to watch the wiring install and computer set-up. Thank you both for sharing.
I love how you show everything, from beginning to end
bad chad, the duke of cool, the billy idol of custom car's, keep's up the great work's man.
U 1 of the best around and of time. Seen a lot of welders and fabricators pretty dang good sir but our gen work is our zin
Looking great ,another masterpiece gets completed,great job of both of you again,thanks for sharing
Love your will to fab together anything you need for your project. Great job !!
Glad to see you’re making a shaker/cover rather than using the plastic one. 👌
I've watched ever so many of your videos Chad, and have to say this one was most informative! At the beginning I was thinking how the hell is he gonna make all those curves ? .... You killed it Chad !!!
Shaker time!!! on Air!! Love to watch as it happens in real time...thank you!
Great video watching talented tradesman working with basic tools to make his vision...awesome. Love this channel.
You do a great job on everything you do. I'm trying to save up to get a welder so that I can start on a project of my own . I have everything else and even the project so ,I'm ready to go as soon as I get it together. In the mean time I'll just keep watching and learning. Keep up the great work and God Bless you guys and your family. 💯👍👍🙏🙏✌😊✌
Just catching up on your videos and man you are a wizard with that sheet metal. I don't know if you have ever heard of being in a "flow state" but man you are there when you are working on that metal.
You are an absolute amazing artistic car guy! Love watching your videos and seeing how you create everything!
The car is coming along great, you are doing an amazing job walking through your process. Thank you for the great insite
So much great content everyday!! I like how you just go for it!!
It is always very interesting to see pieces of sheet metal molded to create something beautiful.
Great job guys. 😎👍
Greetings from Switzerland
Thanks for the video
The shaker is going to look good Chad you make it look easy to make one thank you for the great videos elvis is really going to be king of your cars with the color you chose its fit for a king
this will be a very interesting video cutting and shaping the hood scoop thanks chad and jolene
Another creation by Bad Chad- Looking good. Glad your enjoying creating. Keep up your creativity. Enjoy your show.
My husband really enjoyed you making your shaker hood great job you guys. 👍😎
Hi chad just a thought could you not weld it on the inside. Would be less to grind off maybe
Look like a good start on the shaker, can’t wait to see it finished 👍
Fabrication videos are the greatest👍
it is great that chad shows us every step in the process of what he does
The title pic looks like awesome metal work already; excited to see it happen.
You are a metal master mad man ! Thanks for all you two do , rock on !
Nice Fabrication Chad. Nice workbench, my knees aren’t nearly as sore watching you work on your bench. Love the closeups Jolene
That is going to make Elvis look slick under the hood.
Nice fabric chad, you doing an awesome job on that shakerhood that you're making can't wait to see the finished product. Jolene you doing excellent job of filming.
Hi Chad and Jolene , shaker hood is going to make Elvis look awesome
You are an amazing artist bad Chad🤔. For never making something like that before and figuring it all out right in front of our eyes in just over an hour is amazing to me !! I learned so much from this channel it’s amazing 🤩 🥇🥇
I'll be right here watching like every day!
You have mad skills Chady. I can't wait to see your creations.
Always loved ths shaker hood scoops
Awesome approach again.
Another way to make a complex curve without lots of hammer and dolly work and some plannishing.
The Shaker scoop looks great!
Keep up the good work guys. Love watching each day
I appreciate how you explain your past mistakes when telling why you do something a certain way.
Luv the outcome of the dhaker hood ... will look amazing under the hood
Neat looking scoop! Enjoy watching your Videos! Great Job Chad and Jolene!
I like that you can see more of the motor in the engine bay by having a saker inner hood cover. Thanks Mark Dutka Oakville Ontario Canada
Another good lesson on fabrication of parts. Thank you Chad!
Your talents amazes me it's a pleasure to see you work
Long video but so much interesting content!! I’m going to use this for sure!
Well done Chad a great addition to the engine bay.
You do just enough to get the job done no wasted time or materials. This method works. How do I know because seen you do it with my own eyes lol
Master fabrication and well filmed