@@austinwebs123 yes I was just thinking about this. You would go Aux out > into an interface daw > out of the interface output > back onto a channel. I’ll most likely make a video for it soon. Thanks for watching and best of luck
I just fancy dubbing with things like the sound toys echo and the audio thing spring reverb and audio thing filter that are highly rated plugins for production so to use them for dub would be ace. 👊
@ for about the last 3 days I have thought about trying to use some fx from the computer! I will most def experiment and most likely make a video. There are some pretty cool tape plug ins most def
Fantastic! I also have the model 12 and use the sub as my 3rd FX send! Less is more with the model 12 as it forces you to be more old school (band on 4 track, dub mixing on a 8 channel desk). I like how you get the recording spread across 5 channels and still plenty of dub options on the remaining 3! Quick qustion, are you using 2 x reverb units?
@Tomalo-Dub ok! I just saw another of your posts and see you have the Vermona Lancet Filter. Nice! I have vermona rack mount vintage spring verb. Trying to resist a GAS attack!
@@Tomalo-Dub the vermona spring is good but not great. It is let down by only having a single tone knob, but I can compensate for it by routing in some eq on the rack
Very inspiring ! Is it a Hardwire rv7 pedal ? Do you need to reamp to use those pedals ? Coupling those pedals to the mixer makes it more magic and fun I think.
@@maartenstevens9848 yes a digitech hardwire delay . Very nice pedal ! I have started using re amp boxes due to input of others . Yes you can use it like a plug in on the aux except it is going through the pedal !
@@robletcher2131 yes the model 12 lets you solo. Now that I read your comment I should prob do that instead of all the mutes huh?? Haha! I never get around to adjusting the gain for the solo. The board does solo though 👍 on each channel Big thanks for checking it out !
I don't have that and don't know how the outs go of that set up but absolutely. If its a stereo output, it is not different than my drums on channel 9/10. Just make sure the input can go to the mixer and you should be in business. Anything coming off the traktor can be affected by the other auxs and you can dub onto of your stereo mix
I have the akai midimix, but I plan on getting a tascam 12. It's just assigning pots and faders on the midimix, but it looks like the tascam has way more control. Thanks for the video 💥
@@jerrykelley9266 big thanks for watching and for the suggestion! On the other videos you can go seeing. It’s pretty much delay and reverb sent through the auxs
This is some beautiful dub. I’ve literally just got a model 12 myself and it looks like I’m gonna be having more fun than I first realised.
@@FrequencyMurderation huge thank . The model 12 is like the easiest buy in for dub I feel. It is great all around. Different from the 16 and 24
thick roots vibe ! well played and your words are appreciated. Dub is a consciousness
Huge thank you for taking the time to check it out and comment. Very much appreciated!
Mythical algorithm pull, love this big ups
@@rickypicture9026 big ups! Thank you !!
Peace🙏🏾 sounds great my guy, love that bass🎶🎛
@@Asimoori big thanks ! It is a stingray bass d I to the board
Wicked dubs! Thank you for the walkthrough, have been considering this mixer and this was really helpful.
Big thanks for watching! Model 12 is definitely nice. the 16 and 24 are a bit different ! best of luck
Hey man, just saw this and loved every second as well as your story, keep up the good works, brother! I love the track, very well played and mixed.
@@PillarsOfDub respect 🫡 big thank you !
Great video ! Rootical ! Thank you. ❤
@@Bobby_LH huge thank you 🙏 rock on
@Tomalo-Dub do you have Instagram ?
Thanks for the quick explainer video, helped a lot, The algorithm is being good to me lately 🤩
@@piccell244 🔥 🔥 🔥
Very good moment I like it so much ...
This is soooo freaking siiiiiiic !!!
@@xammai9679 big thanks!
Some interesting control knob config you’ve go going there
Nice, lets give our fingers even less room ny using these bigger knobs...😂
@@muppetpaster no joke. That was exactly what I thought when I changed them. Like damn I’m different and special but this shit is uncomfortable
Dubwise Selection My Youth. Trouble.🎵
Big respect! Dez5!
Loving your use of the model12 … is it possible to run plugins through the aux’s rather than the built in fx or outboard gear? Thx
@@austinwebs123 yes I was just thinking about this. You would go Aux out > into an interface daw > out of the interface output > back onto a channel. I’ll most likely make a video for it soon. Thanks for watching and best of luck
I just fancy dubbing with things like the sound toys echo and the audio thing spring reverb and audio thing filter that are highly rated plugins for production so to use them for dub would be ace. 👊
@ for about the last 3 days I have thought about trying to use some fx from the computer! I will most def experiment and most likely make a video. There are some pretty cool tape plug ins most def
Fantastic! I also have the model 12 and use the sub as my 3rd FX send! Less is more with the model 12 as it forces you to be more old school (band on 4 track, dub mixing on a 8 channel desk). I like how you get the recording spread across 5 channels and still plenty of dub options on the remaining 3! Quick qustion, are you using 2 x reverb units?
@@peterkiefel4324 I am pinning this comment, thank you . Yes there is 2 different reverbs
@Tomalo-Dub ok! I just saw another of your posts and see you have the Vermona Lancet Filter. Nice! I have vermona rack mount vintage spring verb. Trying to resist a GAS attack!
@@peterkiefel4324 how is the Vermona spring ? I completely feel you ! I bought a spring tank now and I am hurting a bit 🔥🔥🔥
@@Tomalo-Dub the vermona spring is good but not great. It is let down by only having a single tone knob, but I can compensate for it by routing in some eq on the rack
Very inspiring ! Is it a Hardwire rv7 pedal ? Do you need to reamp to use those pedals ? Coupling those pedals to the mixer makes it more magic and fun I think.
@@maartenstevens9848 yes a digitech hardwire delay . Very nice pedal ! I have started using re amp boxes due to input of others . Yes you can use it like a plug in on the aux except it is going through the pedal !
Sick bro thanks. Is there a solo button on the channel strip? Like for each channel? I see you can mute but can you solo a track?
@@robletcher2131 yes the model 12 lets you solo. Now that I read your comment I should prob do that instead of all the mutes huh?? Haha! I never get around to adjusting the gain for the solo. The board does solo though 👍 on each channel Big thanks for checking it out !
Always been curious if I could dj live with traktor on this.
I don't have that and don't know how the outs go of that set up but absolutely. If its a stereo output, it is not different than my drums on channel 9/10. Just make sure the input can go to the mixer and you should be in business. Anything coming off the traktor can be affected by the other auxs and you can dub onto of your stereo mix
I have the akai midimix, but I plan on getting a tascam 12. It's just assigning pots and faders on the midimix, but it looks like the tascam has way more control.
Thanks for the video 💥
@@matthewhayes3969 big thanks for watching ! Yeah if you can run output to input into the tascam your pretty much good can send it to fx !
Nice pots. I'm sure you bought those pots a late night on ebay while smoking 🤣
🎉🎉🎉🎉🎉🎉🎉
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
@@Σπύρος-ρ2ω 🔥🔥🔥🔥🔥🔥🔥🔥
Where did you get those knobs ?
@@IslandDigital they are a dj/pioneer knock off from Amazon
How’s a fella get those knobs?
@@gloomshrooom I ordered a couple of standard ones for numark/pioneer deck and carved them out
interesting cool breakdown
You should at least list the equipment you’re using with the model 12 so we can mimic what you’re doing to gain experience.
@@jerrykelley9266 big thanks for watching and for the suggestion! On the other videos you can go seeing. It’s pretty much delay and reverb sent through the auxs