Viel verschenkter Wickelraum. Den 0,1 mm CuL 8 - 10 fach nebeneinander legen und miteinander verdrillen. Ergibt einen stabilen Wicklungsanfang und auch Wicklungsende. Der Anfang sollte wegen Überschlägen mit dünnem Iso-schlauch versehen werden.
Should I increase the no of windings if my core is a little bit bigger and if yes then by how much please reply me fast i need help for my school project!!
Провод 0.10мм, we swing 500 rounds, we glue every 70 rounds, the first 10 rounds, ( качаем 500 патронов, проклеиваем каждые 70 патронов, первые 10 патронов ) 50-100 витков изоляция
@@electronicpuls3242 , thank you very much! I will test and use such a simple and power circuit. Your channel seems to be super interesting and useful, will wait for new videos.
So because the capacitor and inductor system is only to increase the output voltage zvs and have a sine wave through resonance and the transistors without the capacitor and inductor will alternately open and close as with the capacitor and inductor only giving less output power
@@electronicpuls3242 Do you usually like these too? Speaking of making electric shock rods from 1000akV to 2000kv, I want to use electric shock rods again, and I want to use 1000kv to make super EMPs that can interfere with electronic factory products within 100 meters
it's AC because any transformer can't work with dc output, also it's more like arc, then spark. If you want receive spark from this circuit, you'll need HV voltage multiplayer. Sorry for mistakes in my message right now i learn English not for long time
And also be careful when you make HV transformer. You'll need make winding away from border in around 2.5-3mm or 0.1inch, and use around 3 layers of isolation, if you use scotch, or 1 layer if you use insulating tape, don't worry if it can't work in first time it's completely normal, because HV transformer it's not so easy to make.
Bro first he tuned his transformer by increase size and turns of copper winding and second he doubled his Circuit like you just need 1 mosfet and resistor to make nice arc with transformer he doubled his Circuit
Thank you. I've been looking for that circuit for ages
🤩👍❤️
This video of yours was a life saver, I was looking for the details of this circuit for two months thank you man!😝😝
🤩🤩🤩👍
Thank you so much❤
mạch rất tuyệt vời 👍👍👏
Thank you. Do you have a channel?
It was great. Good luck 😍
Thank you 🤩
this is 5 to 10kv at best, still cool for a DIY project
Nice ❤️
🤩✨️
You should get a proper solder iron to improve your soldering skills a little bit but you made it work, good job!
Thanks my friend
I will try making it 😃
good luck friend👌
Viel verschenkter Wickelraum. Den 0,1 mm CuL 8 - 10 fach nebeneinander legen und miteinander verdrillen. Ergibt einen stabilen Wicklungsanfang und auch Wicklungsende. Der Anfang sollte wegen Überschlägen mit dünnem Iso-schlauch versehen werden.
💫💫
🤩
Hola se puede usar un transistor d882 y si no es cual me recomienda?
bro is it ok that my winding has overlaps will it work or I have rewind it
WOW this is really powerful, but it's like 20 ~30 kv!
Should I change the no of windings if my core is a little bigger not much but a little??
Una recomendación el bobinado de hilo más grueso hazlo en el centro del transformador no afuera así obtendrás más eficiencia
Yes👌🤩
Should I increase the no of windings if my core is a little bit bigger and if yes then by how much please reply me fast i need help for my school project!!
Провод 0.10мм, we swing 500 rounds, we glue every 70 rounds, the first 10 rounds, ( качаем 500 патронов, проклеиваем каждые 70 патронов, первые 10 патронов ) 50-100 витков изоляция
Yes
Bro how many layers and turns
turn sekunder = >>>>>>
turn primer 1 = >>>>>>
turn primer 2 =
And also can i use 1k ohm instead of 470 ohm? Will the circuit work with 1k resistor, I use zvs driver thanks
Yes.zvs
Make spot welder with this....
Yes🤩😄
Make video plz
Just build it working good but the problem is only on MOSFET is heating another one is cool why
Yes, this circuit is for momentary use and cannot work all the time because it gets hot🤩🙏✨️
الكهرباء المنتجة Dc كيف نحول هذا القدر الكبير من الكهرباء الى Ac
can I use 20n60 MOSFET
Yes👌
👃👃👃👍👍👍👍👍👍👍
🤩👍
is it more powerful than just a single mosfet driver?
I think it depends on how many volts you use
What happene when I use 1802hi transistor
It does not work for this circuit😄
you have diagram sir pleased?
Hi sir can i ask if the circuit works without Zener ? I use zvs driver with irfz44n
Zener hère only for adjust a voltage of the Gate of MOSFET needed it
ZVS without inductor in supply and resonance capacitor on the output?! Is it possible?
Yes, you can test.
@@electronicpuls3242 , thank you very much! I will test and use such a simple and power circuit. Your channel seems to be super interesting and useful, will wait for new videos.
So because the capacitor and inductor system is only to increase the output voltage zvs and have a sine wave through resonance and the transistors without the capacitor and inductor will alternately open and close as with the capacitor and inductor only giving less output power
hi, can i use diode zener 3.9v , thank you for answering our question
No, the circuit does not work correctly. It must be a 12V zener diode😄
@@electronicpuls3242 Brother, do you plan to make a 1000kv, 2000kv? I want to put this technology on the stun stick
@@user-in8bz3kd7d It's great. Be sure to make it my friend🤩
@@electronicpuls3242 Do you usually like these too? Speaking of making electric shock rods from 1000akV to 2000kv, I want to use electric shock rods again, and I want to use 1000kv to make super EMPs that can interfere with electronic factory products within 100 meters
@@user-in8bz3kd7d Yes, it is very enjoyable. It is very difficult to make such a voltage, is it possible? Can you make it?😁😂
What is the output voltage- AC or DC ?
please reply...🙏
Is it a booster module spark generator circuit ?
please reply....🙏
it's AC because any transformer can't work with dc output, also it's more like arc, then spark. If you want receive spark from this circuit, you'll need HV voltage multiplayer.
Sorry for mistakes in my message right now i learn English not for long time
And also be careful when you make HV transformer. You'll need make winding away from border in around 2.5-3mm or 0.1inch, and use around 3 layers of isolation, if you use scotch, or 1 layer if you use insulating tape, don't worry if it can't work in first time it's completely normal, because HV transformer it's not so easy to make.
It’s more like 20kv
👍👌
Hello can I use 2 transistor d880
No
@@electronicpuls3242 deal thx
Bro increasing v doesn't burn resister or transister because my one burns on simple 3.7 v battery
Did you make the same circuit?
@@electronicpuls3242 no, from another video I was just taking ur advice before making it.
MOSFETs burn very quickly, be sure to put a zener diode to protect them.... The circuit I made is very simple and strong, make sure to make it 🤩
@@electronicpuls3242 yes surely i'll try it
Is it possible to use transistor 13003 ?
Yes✨️
@@electronicpuls3242 thank you😊
@@electronicpuls3242 thank you 😊
10 kv....
No.
can I use normal diode like 4007
Yes
No way is the voltage 100 kV! It’s more like 5 kV.
how is it so powerful with only 500 turns 😮
Bro first he tuned his transformer by increase size and turns of copper winding and second he doubled his Circuit like you just need 1 mosfet and resistor to make nice arc with transformer he doubled his Circuit
@@IshvOP i see now, he used a zvs circuit and properly insulated the transformer, hence the great winding to arc ratiio.
@@HashirEasa yes I but I didn't see the zvs Circuit. 😅
High current high voltage
Hi, bro it is not working , the only my battery and transistors are getting extremely hot
Did you connect the number of primary rounds and zener diode correctly?
@@electronicpuls3242
Yes, I chose the zener 1N4742A 12v , but I wired more than 500 rounds to get more powerful
And I glued every 100 turn
Maybe the MOSFETs are burned...if the circuit is not connected correctly, the MOSFET will burn soon. Test the MOSFET😄
This is 10kv max not 100 lol
Yes, I think the transformer is a maximum of 15 kv.
why don't you make the original ZVS with an inductor, a capacitor and a flyback transformer? the discharges would be much larger
I wanted the circuit to be simple and strong.
I will make it with flyback later
Will you be doing dual coil or single coil?